[Hamlib-developer] (no subject)

[Bob N. <bn...@gm...>]

Setting up GPREDICT with my IC-7900. It's communicating, but I get several
errors. Not sure what to do. Are there additional parameters that I need to
add to the command line?

Radio is setup and COM 7 is 115200 baud. Any help is greatly appreciated.


This is the command line I am running on the Windows desktop

"C:\Program Files\hamlib-w64-4.6.2\bin\rigctld.exe" -m 3081 -r COM7 -t 4532
-s 115200 -vvv





This is what I get when I run it:

icom_get_powerstat: get freq failed, assuming power is off

icom_rig_open: rig error getting frequency retry=1, err=read_string_generic
called, rxmax=200 direct=1, expected_len=1

read_string_generic(): RX 6 characters, direct=1

*****5:frame.c(452):icom_one_transaction returning(-9) Command rejected by
the rig

Command rejected by the rig

****4:frame.c(556):icom_transaction returning(-9) Command rejected by the
rig

rig_get_freq(2597): freqMainA=0, modeMainA=, widthMainA=0

rig_get_freq(2597): freqMainB=0, modeMainB=, widthMainB=0

rig_get_freq(2597): freqSubA=0, modeSubA=, widthSubA=0

rig_get_freq(2597): freqSubB=0, modeSubB=, widthSubB=0

rig_get_cache(328):  vfo=currVFO, current_vfo=currVFO

rig_get_cache(523): vfo=VFOA, freq=0, mode=, width=0

rig_set_cache_freq(171):  vfo=currVFO, current_vfo=currVFO

***3:rig_get_freq: elapsed=0ms

***3:rig.c(2714):rig_get_freq returning(-9) Command rejected by the rig

Command rejected by the rig

Command rejected by the rig

icom_rig_open: rig error getting frequency retry=0, err=read_string_generic
called, rxmax=200 direct=1, expected_len=1

read_string_generic(): RX 6 characters, direct=1

*****5:frame.c(452):icom_one_transaction returning(-9) Command rejected by
the rig

Command rejected by the rig

****4:frame.c(556):icom_transaction returning(-9) Command rejected by the
rig

rig_get_freq(2597): freqMainA=0, modeMainA=, widthMainA=0

rig_get_freq(2597): freqMainB=0, modeMainB=, widthMainB=0

rig_get_freq(2597): freqSubA=0, modeSubA=, widthSubA=0

rig_get_freq(2597): freqSubB=0, modeSubB=, widthSubB=0

rig_get_cache(328):  vfo=currVFO, current_vfo=currVFO

rig_get_cache(523): vfo=VFOA, freq=0, mode=, width=0

rig_set_cache_freq(171):  vfo=currVFO, current_vfo=currVFO

***3:rig_get_freq: elapsed=4ms

***3:rig.c(2714):rig_get_freq returning(-9) Command rejected by the rig

Command rejected by the rig

Command rejected by the rig

Opened rig model 3081, 'IC-9700'






-- 
Bob Nazro, W1RPQ
phone: (860) 941-7993
b <Jos...@cp...>na...@gm...