Re: [Hamlib-developer] HamLib and Codan

[Don P. <ke...@gm...>]

Mike, do I use the rs232 in CICS?
Don

On Tue, Feb 11, 2025, 16:10 Black Michael <mdb...@ya...> wrote:

> Please use the latest WSJT-X improved
> https://sourceforge.net/projects/wsjt-x-improved/
>
> Then turn on Save/Diagnostic mode and send me the
> Desktop\logs\WSJT-X_RigControl.log
>
> It is expecting the login to be "admin" with no password right now.
>
> Mike W9MDB
>
>
>
>
> On Tuesday, February 11, 2025 at 01:24:26 PM CST, Don Poquette <
> ke...@gm...> wrote:
>
>
> I tried using the Codan NGT for my 2110.  But nothing happens.  Running
> 9600 baud and the radio's rs232 is set to CICS.
>
> Don
>
> On Tue, Feb 11, 2025, 09:48 gm...@bt... <gm...@bt...>
> wrote:
>
> Hi Don,
>
> Hamlib is a library which is compiled into a lot of ham radio software. If
> the software does use hamlib, then your radios should be available in the
> drop down list as Codan Envoy and Codan NGT. I've checked with both WSJT-X
> and FL-DIGI and these are both in the drop down list.
>
> There is also a command-line interface (rigctl) that you can use. You will
> have to read the manual to find the exact commands to use.
>
> I hope that helps. 73
> Phil GM3ZZA
>
> ------------------------------
> *From:* Don Poquette <ke...@gm...>
> *Sent:* 11 February 2025 12:50 PM
> *To:* ham...@li... <
> ham...@li...>
> *Subject:* [Hamlib-developer] HamLib and Codan
>
> I use ham software to control my radios like other folks.  I noticed
> HAMLIB has the ability to control Codan radios (versions 4.5 and 4.6).  How
> do I use HAMLIB to connect to a Codan NGT radio?  I tried using the normal
> way via the windows ham software and it doesn't work.
>
> Don Poquette
>
> _______________________________________________
> Hamlib-developer mailing list
> Ham...@li...
> https://lists.sourceforge.net/lists/listinfo/hamlib-developer
>