Re: [Hamlib-developer] [Hamlib/Hamlib] 6dcd60: Increate FT747GX post_write_delay from 5ms to 10ms

[Adrian <vk...@gm...>]

Also regarding the FT-747GX I found that

S 1 VFOB     does not enable split

S 1 VFOA    does enable split and it does TX on VFOB

S 0 VFOB    does disable split as expected and if VFOA used.

In my node red control to rigctld , I changed both on/off VFOB entries 
to VFOA.

I note that wsjtx has always been messy with the FT-747GX selected as 
radio diurect using rig split,

when using HRD as interface worked fine.


73


vk4tux


On 9/11/24 14:30, Michael Black via Hamlib-developer wrote:
>    Branch: refs/heads/master
>    Home:   https://github.com/Hamlib/Hamlib
>    Commit: 6dcd60c2ac68bed9b5129befdac71f06d265cdce
>        https://github.com/Hamlib/Hamlib/commit/6dcd60c2ac68bed9b5129befdac71f06d265cdce
>    Author: Mike Black W9MDB <mdb...@ya...>
>    Date:   2024-11-08 (Fri, 08 Nov 2024)
>
>    Changed paths:
>      M rigs/yaesu/ft747.c
>      M rigs/yaesu/ft747.h
>
>    Log Message:
>    -----------
>    Increate FT747GX post_write_delay from 5ms to 10ms
> Doing two commands at once via rigctld needed a little extra delay
>
>
>
> To unsubscribe from these emails, change your notification settings at https://github.com/Hamlib/Hamlib/settings/notifications
>
>
> _______________________________________________
> Hamlib-developer mailing list
> Ham...@li...
> https://lists.sourceforge.net/lists/listinfo/hamlib-developer