[Hamlib-developer] hamlib errors after execution

[Justin T. <jus...@co...>]

Platform - Raspberry pi 3

OS -Raspian

Radio - FT 857D

Sound Card - Signallink

Rig control  - Flrig

 

Hi 

 

This is a shot in the dark and I'm hoping you can help me or at least point
me in the right direction. Below is the output I get after executing
direwolf -p > direwolferror.txt. Both Hamlib and direwolf have been
successfully installed.

 

###################################################################

Dire Wolf version 1.7

Includes optional support for:  hamlib cm108-ptt dns-sd

 

Reading config file direwolf.conf

Audio device for both receive and transmit: plughw:1,0  (channel 0)

Channel 0: 1200 baud, AFSK 1200 & 2200 Hz, A+, 44100 sample rate / 3.

Hamlib determined CAT control serial port rate of 0.        Is this ok , to
have serial port rate = 0? 

Retrying Hamlib Rig open... Don't understand what it's looking for here and
why it can't connect

Retrying Hamlib Rig open...

Retrying Hamlib Rig open...

Retrying Hamlib Rig open...

Retrying Hamlib Rig open...

Hamlib Rig open error -6: network_open: failed to connect to localhost:4532
Is 4532 correct ?

rig_open: rs->comm_state==0?=0

1:rig.c(1023):rig_open returning(-6) IO error

 

1:rig.c(817):rig_open entered

rig_settings_get_path:
path=/home/justin/.config//home/justin/hamlib_settings  hamlib_settings does
not exist  was it missed during installation?

rig_settings_load_all: settings_file
(/home/justin/.config//home/justin/hamlib_settings): No such file or
directory

rig_open: cwd=/home/justin

rig_open: /home/justin/.config//home/justin/hamlib_settings does not exist

rig_open: async_data_enable=0, async_data_supported=0

rig_open: using network address localhost:4532

network_open: hoststr=localhost, portstr=4532

network_open: Using IPV6

connect to localhost:4532 failed, (trying next interface): Network error
111: Connection refused Don't know what these errors are?

connect to localhost:4532 failed, (trying next interface): Network error
111: Connection refused

network_open: failed to connect to localhost:4532

rig_open: rs->comm_state==0?=0

1:rig.c(1023):rig_open returning(-6) IO error Don't know what this error is 

 

IO error

 

############################################################################
###############

 

 

Thanks in advance for your help . If you need more information , don't
hesitate .

 

Justin Tabatchnick