Re: [Hamlib-developer] TS450 and latest CVS - passband OK

[Sid B. <sb...@bl...>]

AOK, I shall try to keep up with any CVS changes.
Regards
Sid.

On Sat, 2002-12-21 at 12:46, Joop Stakenborg wrote:
> On 21 Dec 2002 00:19:53 +0000
> Sid Boyce <sb...@bl...> wrote:
> 
> > 
> > Rig command: m
> > TX 3 bytes
> > 0000     49 46 3b       IF;
> > RX 38 characters
> > 0000     49 46 30 30 30 30 33 37 34 34 30 30 30 20 20 20       
> > IF00003744000
> > 0010     20 20 2d 30 30 32 30 30 30 20 30 30 30 31 30 30         
> > -002000 000100
> > 0020     30 30 20 20 20 3b                                      00   ;
> > Mode: LSB
> > Passband: 2400
> > 
> 
> Your rig does not have a command for reading the IF bandwidth, so
> I have simply calculated the default bandpass for every mode, as
> Stephane suggested. Also, setting bandpass won't work, because
> there is no command for it.
> 
> > Rig command: j
> > TX 3 bytes
> > 0000     49 46 3b       IF;
> > RX 38 characters
> > 0000     49 46 30 30 30 30 33 37 34 34 30 30 30 20 20 20       
> > IF00003744000
> > 0010     20 20 2d 30 30 32 30 30 30 20 30 30 30 31 30 30         
> > -002000 000100
> > 0020     30 30 20 20 20 3b                                      00   ;
> > RIT: -20
> > 
> 
> This looks good. Can you please check set_rit ('J' in rigctl)?
> Should work as far as I can see from the docs.
> 
> Next, I will have a look at some other commands and see how
> I can hack it into the TS450S code. Will come back to you.
> 
> > 
> > Regards
> > Sid.
> > 
> > -- 
> > Sid Boyce ... hamradio G3VBV ... Cessna/Warrior Pilot
> > Linux only shop
> > 
> > 
> > 
> 
> Joop
-- 
Sid Boyce ... hamradio G3VBV ... Cessna/Warrior Pilot
Linux only shop