Re: [Hamlib-developer] TS450 and latest CVS - passband OK

[Joop S. <pa...@de...>]

On 21 Dec 2002 00:19:53 +0000
Sid Boyce <sb...@bl...> wrote:

> 
> Rig command: m
> TX 3 bytes
> 0000     49 46 3b       IF;
> RX 38 characters
> 0000     49 46 30 30 30 30 33 37 34 34 30 30 30 20 20 20       
> IF00003744000
> 0010     20 20 2d 30 30 32 30 30 30 20 30 30 30 31 30 30         
> -002000 000100
> 0020     30 30 20 20 20 3b                                      00   ;
> Mode: LSB
> Passband: 2400
> 

Your rig does not have a command for reading the IF bandwidth, so
I have simply calculated the default bandpass for every mode, as
Stephane suggested. Also, setting bandpass won't work, because
there is no command for it.

> Rig command: j
> TX 3 bytes
> 0000     49 46 3b       IF;
> RX 38 characters
> 0000     49 46 30 30 30 30 33 37 34 34 30 30 30 20 20 20       
> IF00003744000
> 0010     20 20 2d 30 30 32 30 30 30 20 30 30 30 31 30 30         
> -002000 000100
> 0020     30 30 20 20 20 3b                                      00   ;
> RIT: -20
> 

This looks good. Can you please check set_rit ('J' in rigctl)?
Should work as far as I can see from the docs.

Next, I will have a look at some other commands and see how
I can hack it into the TS450S code. Will come back to you.

> 
> Regards
> Sid.
> 
> -- 
> Sid Boyce ... hamradio G3VBV ... Cessna/Warrior Pilot
> Linux only shop
> 
> 
> 

Joop