Re: [Hamlib-developer] Re: TS-450S commands (2)

[Sid B. <sb...@bl...>]

barrabas:/usr/src/packages/BUILD/mkinitrd-3.4.32 # rigctl -vvvvvv -m 321
-s 1200 -r /dev/ttyS0
rigctl, Hamlib version 1.1.4-cvs
Report bugs to <ham...@li...>

rig:rig_init called
rig: loading backend icom
rig:  lt_dlopen("hamlib-icom") failed (libhamlib-icom.a: cannot open
shared object file: No such file or directory), trying static symbols...
icom: _init called
rig_register (309)
rig_register (310)
rig_register (311)
rig_register (313)
rig_register (319)
rig_register (321)
rig_register (330)
rig_register (326)
rig_register (327)
rig_register (347)
rig_register (334)
rig_register (344)
rig_register (335)
rig_register (340)
rig_register (342)
rig_register (304)
rig_register (307)
rig_register (352)
rig_register (353)
rig_register (351)
rig:rig_open called
Opened rig model 321, 'IC-737'
Backend version: 0.2, Status: New

Rig command: f
TX 6 bytes
0000     fe fe 3c e0 03 fd      ..<...
RX 6 characters
0000     fe fe 3c e0 03 fd      ..<...
RX 11 characters
0000     fe fe e0 3c 03 20 09 19 14 00 fd       ...<. .....
Frequency: 14190920

Rig command: m
TX 6 bytes
0000     fe fe 3c e0 04 fd      ..<...
RX 6 characters
0000     fe fe 3c e0 04 fd      ..<...
RX 8 characters
0000     fe fe e0 3c 04 01 01 fd        ...<....
Mode: USB
Passband: 2100

Rig command: v
get_vfo: error = Feature not available

Rig command: j
get_rit: error = Feature not available

Rig command: V
VFO: VFOA
TX 7 bytes
0000     fe fe 3c e0 07 00 fd   ..<....
RX 7 characters
0000     fe fe 3c e0 07 00 fd   ..<....
RX 6 characters
0000     fe fe e0 3c fb fd      ...<..

Rig command: V
VFO: VFOB
TX 7 bytes
0000     fe fe 3c e0 07 01 fd   ..<....
RX 7 characters
0000     fe fe 3c e0 07 01 fd   ..<....
RX 6 characters
0000     fe fe e0 3c fb fd      ...<..

Rig command: V
VFO: VFOA
TX 7 bytes
0000     fe fe 3c e0 07 00 fd   ..<....
RX 7 characters
0000     fe fe 3c e0 07 00 fd   ..<....
RX 6 characters
0000     fe fe e0 3c fb fd      ...<..

Rig command: n
get_ts: error = Feature not available

Rig command: x
TX 7 bytes
0000     fe fe 3c e0 07 01 fd   ..<....
RX 7 characters
0000     fe fe 3c e0 07 01 fd   ..<....
RX 6 characters
0000     fe fe e0 3c fb fd      ...<..
TX 6 bytes
0000     fe fe 3c e0 04 fd      ..<...
RX 6 characters
0000     fe fe 3c e0 04 fd      ..<...
RX 8 characters
0000     fe fe e0 3c 04 00 01 fd        ...<....
TX 7 bytes
0000     fe fe 3c e0 07 00 fd   ..<....
RX 7 characters
0000     fe fe 3c e0 07 00 fd   ..<....
RX 6 characters
0000     fe fe e0 3c fb fd      ...<..
Mode: LSB
Passband: 2100
	It flips to VFO-B on 80m and then back to VFO-A on 20m.

Rig command: t
get_ptt: error = Feature not available

Rig command: c
get_ctcss_tone: error = Feature not available

Rig command: i
TX 7 bytes
0000     fe fe 3c e0 07 01 fd   ..<....
RX 7 characters
0000     fe fe 3c e0 07 01 fd   ..<....
RX 6 characters
0000     fe fe e0 3c fb fd      ...<..
TX 6 bytes
0000     fe fe 3c e0 03 fd      ..<...
RX 6 characters
0000     fe fe 3c e0 03 fd      ..<...
RX 11 characters
0000     fe fe e0 3c 03 30 67 78 03 00 fd       ...<.0gx...
TX 7 bytes
0000     fe fe 3c e0 07 00 fd   ..<....
RX 7 characters
0000     fe fe 3c e0 07 00 fd   ..<....
RX 6 characters
0000     fe fe e0 3c fb fd      ...<..
Tx frequency: 3786730
	Flips to 80m and back to 20m (VFO's)

Rig command: s
get_split: error = Feature not available

Rig command: _
Info: None

Rig command: F
Frequency: 00014200000
TX 11 bytes
0000     fe fe 3c e0 05 00 00 20 14 00 fd       ..<.... ...
RX 11 characters
0000     fe fe 3c e0 05 00 00 20 14 00 fd       ..<.... ...
RX 6 characters
0000     fe fe e0 3c fb fd      ...<..
	Moved VFO-A to 14200.00

Rig command: J
RIT: +100
set_rit: error = Feature not available

Rig command: j
get_rit: error = Feature not available

Others such as "G", I'd have to look up the parameters.
Let me know if I can do anything else.
BTW -- the latest CVS (earlier Tuesday and about 23:00 GMT) do not
generate shared libhamlib, configure checks that -fPIC is OK.
Regards
Sid.





On Tue, 2002-12-17 at 22:16, Stephane Fillod wrote:
> On Tue, Dec 17, 2002, Sid Boyce wrote:
> > 	Correct, it's the IF bandwidth, currently set here at 2.4Khz. 
> 
> What are the different IF bandwidth combinations on the TS450?
> I've checked in in the cvs repo some fixes for the .filters field.
> But reading at page 9 of the manual let one think everything is possible
> for LSB,USB,AM,FSK: 12k, 6k, 2.4k, 500.
> 
> > The IC737 setup as IC775 using address 0x3c reports it correctly.
> 
> BTW, can you try again the IC737 support in Hamlib?
> This should be something like the following:
> 	rigctl -vvvvvv -m 321 -s 1200 -r /dev/ttySxxx
> 
> Please report with traces, or any information giving a possible clue.
> 
> Note: if serial baud rate is different than 1200, change the -s option.
>       Do know what is the highest baud rate that can be set on the IC737? 
> 
> IOW, the IC737 has to work :-)
> 
>  
> > > > 	Looks better on the second try apart from passband ...........
> Joop: 
> > > Yes, passband is on the TODO list. I have to look into it, at the
> > > moment I don't have a clue what it is for. Guess it has something
> > > to do with the IF bandwidth.
> 
> In ts450s_get_mode(), if you don't know the passband, you may simply do
> the following (once *mode is set):
> 
> 	*width = rig_passband_normal(rig, *mode);
> 
> However, it would be better to use the "FL;" command, and set *width
> appropriately, depending on the 8.83MHz and 455 kHz IF filters returned
> in P1 and P2.
> Note: the same can be done in ts450s_set_mode.
> 
> 73
> Stephane
-- 
Sid Boyce ... hamradio G3VBV ... Cessna/Warrior Pilot
Linux only shop