[Hamlib-developer] Japan Radio NRD-545 commands

[Bob P. A. <pa...@me...>]

Hello hamlib,

This is my first posting.  I have no experience with
using the hamlib API, but I can provide interface
information for the Japan Radio NRD-545 receiver.

I'm nearly finished writing a control program for the
JRC NRD-535D receiver.  The software is written in
Tcl/Tk so it runs on either Linux or Windows 98.  Haven't
tested it on Macs, Solaris, or operating systems due to
a lack of resources.

I learned the NRD-545 commands by studying the documentation
in the NRD-545's instruction manual.  So far, JRC's documentation
has been accurate.  I've used most, but not all, of their
commands.

The NRD-545 serial port receives and sends simple ASCII
character sequences and I've found it easy to use.  Looks
a lot "cleaner" than the commands to control an ICOM IC-R8500.

I can provide a copy of the NRD-545 computer command documentation
which consists of 6 or 7 pages.  I can
send a scanned copy or (more easily) mail a paper copy
to a hamlib developer located in the USA if there's a demand.
-- 
=======================================================================
Bob Parnass, AJ9S                                  pa...@me...
                           Linux user