[Hamlib-developer] Hamlib 4.5.5 released
Library to control radio transceivers and receivers
Brought to you by:
n0nb
From: Nate B. <n0...@n0...> - 2023-04-05 22:04:52
|
Thanks to Mike and all contributors, Hamlib 4.5.5 has been released! As usual, releases are made available via GitHub and SourceForge: https://github.com/Hamlib/Hamlib/releases/tag/4.5.5 https://sourceforge.net/projects/hamlib/files/hamlib/4.5.5 The visible changes in this release are: Version 4.5.5 * 2023-04-05 * Add park to rotorez.c * Fix rig power on/off from rigctl cmd line and rigctld * Enable async mode by default to prevent WSJT-X crash on IC9700 with transceive on * Fix IC7610 get_powerstat to disable it -- cannot read power status * Fix K3 K22 command error for remote operations * Fix Gemini DX1200 gemini_set_level * Fix async I/O to not call flush * Change EX startup commands for Yaesu rigs to allow errors...Win4Yaesu not recognizing EX commands * Fix jst145 set_freq and get_freq * Restore tcflush as some odd behavior was seen that tclush fixes * Fix XG3 operations * Separate the validation cmd in newcat.c to allow rig post_write_delay to be in effect * Increase post_write to 20ms for FT710 * Add attenuator level control for TS890 * Update SMeter/SWR tables for TS890 * Add fix for TMD700 * Improve FT-857 get_vfo response when error occurs * Allow FT-857 to use cached vfo on get_vfo when error occurs reading EEPROM * Fix FTDX10 FT710 set_level AF * Fix FT-450D detection * Fix VFO A/B swapping for gpredict -- hopefully better behavior for VFO swapping rigs Should avoid setting RX freq while TX and avoid TX freq while RX * Fix QRP QDX PTT to new TQ command due to firmware changes * Remove EX103 check for FTDX5000 * Fix K3/K3S VFOB setting of mode/width * Fix AGC level display in rigctld * Change FTDX10 to no serial handshake * Add TS2000 to has_ps exception * Add FT991 to 60M exception * Fix get_powerstat bad call in rigctl_parse.c * Really fix CM108 ptt_bitnum usage * Fix Elecraft power2mW precision/accuracy * Fix power on/off/on for Icom rigs with rigctld power_on=0 73, Nate -- "The optimist proclaims that we live in the best of all possible worlds. The pessimist fears this is true." Web: https://www.n0nb.us Projects: https://github.com/N0NB GPG fingerprint: 82D6 4F6B 0E67 CD41 F689 BBA6 FB2C 5130 D55A 8819 |