Re: [Hamlib-developer] Question...rigctl timed out on receive, cannot see data from 746PRO

[Black M. <mdb...@ya...>]

Sounds like you have the wrong port.What does "dmesg | grep tty" show?  Another USB device maybe?
 Mike W9MDB
    On Wednesday, April 5, 2023 at 03:03:21 PM CDT, jeff millar <wa...@gm...> wrote:  
 
 Can anyone provide guidance on debugging this problem...
Here is a bit of log from rigctl.  This occurs during startup.
$ rigctl -m3046 -r /dev/ttyUSB0 -s 9600 -vvvvv 2> rigctl.log
<...>

icom_transaction: cmd=0x07, subcmd=0x00, payload_len=0   3:frame.c(142):icom_one_transaction enteredrig_flush: called for serial deviceread_string_generic called, rxmax=4095 direct=1, expected_len=1tcflushwrite_block(): TX 7 bytes, method=20000    fe fe 66 e0 07 00 fd                                ..f....         read_string_generic called, rxmax=200 direct=1, expected_len=1read_string_generic(): Timed out 1.002 seconds after 0 chars, direct=1   3:frame.c(189):icom_one_transaction returning(-13) Communqication bus error<...>

rigctl report version 4.6rigctl is connected to an IC-746PRO at 9600.Using FTDI USB to CI-V adapter.FTDI adapter works on IC-7300Other adapters fail the same way (prolific, fake prolific, other chinese)Oscilloscope in CI-V line shows Tx from rigctl and response from radio, looks normalOscope only shows response from radio when baud rate correct...so reading scope right
any ideas or suggestions?
jeff, wa1hco


_______________________________________________
Hamlib-developer mailing list
Ham...@li...
https://lists.sourceforge.net/lists/listinfo/hamlib-developer