[Hamlib-commits] Hamlib -- Ham radio control libraries annotated tag 4.5 created. 4.5
Library to control radio transceivers and receivers
Brought to you by:
n0nb
Menu
▾
▴
[Hamlib-commits] Hamlib -- Ham radio control libraries annotated tag 4.5 created. 4.5
|
From: Nate B. <n0...@us...> - 2022-10-30 01:06:14
|
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Hamlib -- Ham radio control libraries".
The annotated tag, 4.5 has been created
at 61a02c500ce9c7b40003ccb9ff2fbf11d08dbff3 (tag)
tagging 58f9fd41be46671d2254fa897200f9672c59f94e (commit)
tagged by Nate Bargmann
on Sat Oct 29 20:02:37 2022 -0500
- Log -----------------------------------------------------------------
Hamlib 4.5 release
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQSC1k9rDmfNQfaJu6b7LFEw1VqIGQUCY13NUAAKCRD7LFEw1VqI
GdiZAJ9nXWKNFQq8UOmdvsoJuUnS4OlkkQCeMQ4BtiBvSi0Xqij1SV2USvvib1Q=
=VmhK
-----END PGP SIGNATURE-----
(no author) (1):
New repository initialized by cvs2svn.
Adrian Chadd (1):
Upgrade TS-711 and TS-811 to work.
Agis Zisimatos (1):
easycomm: Return the correct value of pointer val
Alessandro Zummo, IZ1PRB (36):
Remove const from priv_caps to allow kenwood_init to initialize default values if they're missing
Call kenwood_init in each and every driver
Use an appropriate debug level
Support get/set_powerstat on pcr100
Add kenwood_simple_cmd
Make set_ptt behave as before, fix set_ant for ts570.c
ts450: remove RIG_FUNC_TONE from has_xx_func if tone unit is not detected
ts450,ts690,ts850: use FL command to get/set filters in get/set_mode. (code from ts850.c)
ts450: indentation fixes
remove fixed command terminator (;) from generic code
ts140,ts2000,ts480,ts570,ts680,ts850,ts870s: remove usage of fixed ; and EOM
fix tabs
thg71,tmv7,ts450s,ts690: verify rig id at rig_open
ts450: implement set_channel
remove unused parameter from get_kenwood_func
ts570,ts850,ts870s,ts140,ts480,ts680: use kenwood_simple_cmd where possible
Replace __FUNCTION__, which is gcc specific and was deprecated a long time ago, with __func__, which is at least defined in C99.
generic, ts850: implemented CTCSS TN command (reported not working for ts850, should now be fixed)
Add description for the kenwood mode n. 8
implemented set/get_ext_param (voice, fine, xit, rit). enabled on ts450 and ts850
Added my call sign
removed comment about switch optimizatons. the compiler will generate the assembly code in a different order which is usually based on the case value. other compiler optimizations might also affect it, so it's useless to optimize the order.
check ptt status before set_ptt. enabled on ts850.
style fixes
band up/down was inverted
Try to compensate for leftover characters
Try to cope withe the PCR100 and PCR1000 at the same time
Bumped out to beta, solved a few bugs. Tested with PCR100/1000/1500.
kenwood: send the whole buffer at once, added kenwood_cmd
- removed EOM, it's handled by kenwood_transaction - fixed tabs and spaces - added generic routine for vfo errors - set_mem: do not switch vfo if already in mem mode - simplified invocation of some commands - buffer optimizations - added PARM_BEEP and PARM_APO - fixed getting of LEVEL_RFPOWER - fixed get_ant
tmv7: removed EOM
thg71: removed EOM
thf7: - wrong rfpower level granularity - added .reset - call kenwood_open - use generic th_set_vfo
th: fixed formatting issue
th: fixed stack corruption
th: fixed a missing newline
Alex V Flinsch, KC2IVL (8):
Initial changes for ft100
Initial release
initial release
fixed various command options
new file, list of tones/codes and sequence used by various yaesu rigs
added get frequency to ft100 code
added getinfo func hdr
*** empty log message ***
Alexander Sack (1):
Get firmware revision level from K3/KX3.
Alexander Schultze (3):
easycomm: include a new EasyComm3 to support move speed and infostring
update EasyComm3 to include setting and getting of config and status
easycomm: implement get/set config, easycom include status and error bytes, fix get_info
Alexandru Csete OZ9AEC (34):
Added new stylesheet to make API docs look better.
Modified to use new stylesheet.
Added doxygen comments.
Added rotator.h and rotlist.h to the input list.
Applied Tommi's improvements from the FT-857 backend with the following changes and additions:
Full RF power scale corresponds to 10 bars, not 15.
Added RIT, XIT and IF shift ranges to dummy backend.
Cast constant caps to variable caps in order to avoid compiler warnings.
Cast from const to variable in order to avoid compiler warnings.
- Cast unsigned char to char in order to avoid compiler warnings. - Ensure that all variables have a value before they are used (ft920). - Disable unused functions and variables (frg100). - Incremented backend version numbers.
Use tone_t for pcr1_ctcss_list. Changed arg 4 of pcr_transaction to unsigned. Cast the other mismatches to (char *).
Cast unsigned char to char in order to avoid compiler warnings. Incremented backend version number.
- Cast unsigned char to char in order to avoid compiler warnings. - Ensure that all variables have a value before they are used (tentec.c).
- Cast unsigned char to char in order to avoid compiler warnings. - Incremented backend version number.
- Cast/change unsigned char to char in order to fix compile warnings. - Incremented backend version number.
- Cast/change unsigned char to char in order to fix compile warnings. - Incremented backend version numbers.
- Cast/change unsigned char to char in order to fix compile warnings. - Incremented backend version numbers.
- Cast/change unsigned char to char in order to fix compile warnings. - Incremented backend version number.
- Cast/change unsigned char to char in order to fix compile warnings. - Incremented backend version numbers.
- Cast unsigned char to char in order to avoid compiler warnings. - Handle all enum values in switch statements.
Fixed type mismatches that caused compile warnings.
Fixed type mismatches that caused compile warnings.
Initialise icom_val to avoid compiler warning.
Fixed type mismatches between signed and unsigned char. There are a few very suspicious 'if' statements in icom.c and frame.c
- Fixed type mismatches and unhandled switch cases. - Incremented backend version numbers.
Cast constant caps to variable caps in order to avoid compiler warnings.
Updated.
Added infor about w (send_cmd).
Max serial rate is 9600. Changed backend status to stable.
Escape the backslash character.
The 765 can do RIG_SCAN_PROG and RIG_SCAN_MEM.
Fixed S-meter reading to use calibration table since frontend always uses RAWSTR.
Fixed RF power reading and added power2mw and mw2power.
Fixed RIG_LEVEL_STRENGTH reading.
Andrew Errington (1):
Initial support for CM108 GPIO contorl of PTT
Andrew Rodland (3):
Fix spurious writes when no RT-21 second port
Enable "stop" command for RT-21 rotator.
Update RT-21 version
AuroraRAS (5):
Prepare .gitignore file for NDK build
Append the missing information to build hamlib v4.3 for Android NDK
make the Android.mk files adapt to multi arch
add androidsensor rotator
AndroidSensor codes improvement
Ben Coleman, NJ8J (6):
Fixed bug in rpcrig_set_parm (using RIG_LEVEL_IS_FLOAT instead of RIG_PARM_FLOAT)
Fixed same bug in rigctl_get_parm.
Added checking of return string from rig on set (non-retrieval) commands. Added code for COMP function. Added alinco_set_parm & tweaked dx77 capabilities.
Handle setting Keyer speed and CW Pitch
Added NJ8J's email address.
Change email address for NJ8J
Berndt Josef Wulf, VK5ABN (11):
Implemented rig_set_channel()
Implemented set_parm() for BACKLIGHT operation
Commented out RIG_MODE_PKTFM overlooked at the submission of previous code
Implemented RIG_MODE_PKTFM and RIG_MODE_PKTLSB modes
Changed debug message format for freq_t from long long to double
ft990_get_ptt() now uses the FT990_SF_XMIT instead of FT990_SF_PTT. FT990_SF_PTT only returns status of PTT activated by CAT commands, whereas FT990_SF_XMIT reports the actual status of the ptt line.
ft990_get_mem(): Fixed bug that prevented the reporting of current channel number when vfo != RIG_VFO_MEM
Fixed erroneous return value
Fixed mispelled name for VK5ABN
Added missing modes to RX/TX caps
Fixed bug in ft990_set_mode that caused RTTY interchanged modes USB/LSB Fixed bugs in ft990_get_channel
Bill Barker (1):
Add test for Flex 6300 ID
Bill Somerville (212):
Patch submission for IC-756
Patch to allow same serial port for PTT and CAT.
Patch to fix broken Yaesu backend with FT-2000(D)
Fix rig_open not failing when PTT/DCD port is unavailable.
Fix Icom IC-756 filter handling.
Fix Yaesu newcat backend set_tx_vfo issue.
Add support for Data Modes on Icom "Pro" models.
Fix Icom IC-726 mode handling.
Fix Kenwood TS-2000 split operation.
Fix Kenwood Split Operation for TS50 & TS480.
Fix Kenwood TS-870s split and bandwidth set/get.
Correct receive buffer length for IS; comamnd.
Fix Kenwood CAT transaction busy retry mechanism.
Fix Kenwood get split VFO function.
Add data sub-mode support for TS590s.
Correct order of MD and DA commands for TS590s.
Get firmware revision for TS590s in rig_open.
Fix TS590s firmware defect.
Fix Kenwood get_vfo function returning wrong VFO in split TX.
Make Kenwood TS590s firmware defect fixup revision specific.
Extend TS590s firmware defect fixup to both VFOs.
Fix Icom IC-756 Pro III get data mode.
Add spilt mode get and set for Elecraft K3.
Fix data sub-modes on Elecraft K3.
Fix Elecraft Data Mode Translation.
Fix Elecraft K3 Data Sub-Mode Setting.
Fix Yaesu FT1000MP and FT1000MP Mk V modes.
Fix configure.ac
Fix a warning message.
Added option to not use VFO XCHG command when setting split parameters.
Fix a buffer overflow in the Windows termios emulation.
Fix pkg-config generation.
Fix Icom IC-756Pro mode get/set.
Facility for rigctl to read commands from standard input.
Add a pause command to the rigctl command set.
Prefix action function names so as not to clash with system names.
Prefix action function names so as not to clash with system names.
Corrected typos in rigctl.1 manpage.
Add read commands from stdin and pause command features to rotctl.
Merge branch 'rigctl-stdin' of ssh://git.code.sf.net/u/bsomervi/hamlib into rigctl-stdin
Fix manpage errors.
Remove redundant RIG_PTT_SERIAL_CAT enum from ptt_t
Only check for serial control line conflicts if PTT shares CAT port
Fix Ten-Tec Orion get/set split functions
Icom IC-7410 has VFO A/B not MAIN/SUB
Added IC-7410 data modes
Add retry mechanism for Yaesu "newcat" backend
Implement retries for Yaesu "newcat" rigs
Disable auto information mode on open
Add retry mechanism for Yaesu "newcat" backend
Implement retries for Yaesu "newcat" rigs
Disable auto information mode on open
Merge branch 'yaesu-retries' of ssh://git.code.sf.net/u/bsomervi/hamlib into yaesu-retries
RIG_OK is zero and need not be negated and this will not change
Fix response length expected error in K3 back end
Data mode support for the Icom IC-7700
Data mode support for the Icom IC-9100
Data mode support for the Icom IC-7200
Add support for the Kenwood TS-590SG
Kenwood TS-590SG
Always clear serial control lines when used for PTT
Disable AI mode on open for Kenwood/Elecraft rigs
Add more diagnostics and error checks to serial line control
Move serial line control error checks to lower level routines
Merge branch 'master' into kenwood-ai-off-at-start
Merge branch 'master' into ptt-control-on-cat-port
Fix serial i/o on Windows.
Yaesu newcat style command response reading improvements
Increase communications timeout for Icom rigs
Kenwood AIn; command has no reply
Revert read_string() to partial results are a success status
Remove gratuitous sleeps before function exits
Error checks on simulated direct VFO addressing
Elecraft K2 RTTY modes are not FSK
Kenwood and Elecraft rigs sometimes ignore commands
Removed kenwood_cmd function and replaced uses of it
Allow for failed test command on the K2
Elecraft K3 has 1 stop bit
Kenwood TS-570 series IF returns current frequency
Switch to "ID;" command for verification as no "AI;" on TS-840s
Increase Elecraft K2 comms timeout and retries
Switch Kenwood TS940 to generic kenwood CAT functions
Improve command verification for Kenwood & Elecraft
Use local buffer in kenwood transaction funciton
Clarify the handling of Kenwood CAT message terminators
Further clarification in the implementation of kenwood_transaction()
Removed redundant precondition test
Remove kenwood_simple_cmd as kenwood_transaction has that functionality
Call kenwood_open() for TS-2000 to ensure AI mode is disabled
Allow for bad ID from DDUtil in TS-2000 mode
Allow one extra byte in read_string() length to accomodate terminator
Enable data modes for the Icom IC-7100
Allow for PowerSDR ID in Kenwood TS2000 emulation mode
Fix TenTec Argonaut message lengths and timeout
Fix TenTec set split command
Implement get PTT status for the TenTec Argonaut
Fix error with width in set mode for the TT argonaut
Yaesu FT540 can only change the frequency of the current VFO
Fix defect in Kenwood TS-940 IF command response parsing
Fix response lengths for the TT Jupiter 538
Do not attempt CAT PTT commands on the Icom IC-706mkIIG
Use correct argument type for serial control line functions
Initial back end implementation for the Kenwood TS-990s
Mode set is not VFO targetable on the Kenwood TS990s
The Kenwood TS990s only does split Tx on SUB VFO
The doesn't appear to be a way of getting PTT/SEND on the TS990s
Lower both RTS and DTR on alternate PTT serial port
Honour any error status from serial port calls
Dummy get_ptt function needs to read RTS/DTR/PARALLEL
Make autogen.sh agnostic to whitespace in paths
Increase the number or retries for most Kenwood rigs
Command validation for Yaesu set commands
Remove unecessary delays from TS-940S backend
Proper IPv6 and dual stack networking
Fix compiler warnings
Proper IPv6 and dual stack networking for rotator net daemon
Attempt to restore AI status on exit
Allow for poor emulations of Kenwood rigs that have no ID command
Use correct function to execute set type commands with no response
Add a new command line option '--no-restore-ai' ('-n') to rigctl
Fix FT-817/857/897 issues and add some missing functionality
Fix missing PKTUSB mode setting code for FT-817 & FT-897
Fix a logic error in band detection during IC-910 set frequency
Add missing configuration getters
Detect C-IV NAK returns as rejected commands
Elecraft rigs do not switch VFO in IF command responses during split Tx.
Redundant split mode directives on Elecraft rigs cause Tx failures
Only use IPv6 features on Windows versions that support it (>=XP)
Improve IPv6 portability and consistency
Add 23cms to IC-910(H) backend
Implement combined split VFO frequency and mode setting.
Initial implementation of rig_{set,get}_split_freq_mode() for FT-857.
Implement rig_{set,get}_split_freq_mode() for IC-756 series.
Add {get,set}_splitfrequency_mode for the IC-910(H)
Elide unnecessary CAT commands when setting split frequency and mode
Do not swap VFO unnecessarily
Better set frequency semantics for the IC-910(h)
VFO targetable get frequency operation for the Icom IC-910(h)
Make sure right band is used when setting frequency on IC-910(H)
Use rig state rig port retry option rather than from capabilities
Use a sensible port timeout value for the Kenwood TS-850
Further attempts to simplify and improve Icom CAT for split operating
Add RIG_PASSBAND_NOCHANGE as possible set_{split_,split_freq_,}mode argument
Switch to POSIXLY_CORRECT mode for getopt_long()
Fix a regression introduced in 222ad74
Do not crash if expected CTCSS tones not sepcified
Do not attempt to query AI state on the TS-450s as it is not supported
Some more Kenwood rigs with no AI query
Adjust rig_list_foreach to allow use for unregistering
Fix an issue presenting on the Yaesu FT-450(D)
Release the serial port used for PTT when possible
Change the IC7600 & IC7800 set/get mode to versions that support DATA modes
Add rig_{open,close} functions to TS-790 backend
Revised kenwood rig busy response handling
Add get and set split functions for the TS450S
Simplify and fix defects in the FT991 back end
Fix some endian issues in the si570/AVR SDR back ends
Fix a state machine defect with repeated PTT reset calls
Do not pass --no-cpp_precomp to compilers on Mac OS X
Allow RIG_LEVEL_STRENGTH queries over the network link
Stop rigctld and rotctld crashing when service threads cannot write to clients
Use snprintf throughout kenwood/kenwood.c for buffer safety
Fix off-by-one issue in reading memory mode from IF command response
Fix some issues with commands not supported by TS-2000 CAT emulations
Add best guess transmit status to rig state structure
Take out unecessary delays in K(X)3(S) back end.
FT-817 status queries honour retries and timeout
Make rig_open() call in rigctld lazy and add graceful termination
Simplify SWIG interface definition and hide 64-bit values from Lua binding
Remove unnecessary delays from TS-990 and TS-2000 back ends
Change frequency setting for the FT-747GX to something more basic
Fix an incorrect error return value from win32_serial_select()
Fix timeout issues with the Ten-Tec Orion/Eagle
Ensure compilation works with a pre C11 compiler
Make code C90 compliant again
Move unnecessary global and file static variables to the stack
Simplify unnecessary persistence of extended response state
Fix misunderstanding of netrigctl_transaction() return value
Made PTT and DCD options consistent between rigctl and rigctld
Report unrecognised PTT and DCD types in rigctl and rigctld
Update i/o functions to support GPIO(N) port closure
Fixed erroneous messages in rig_close with GPIO(N) PTT or DCD types
Remove duplication across GPIO and GPION handling of PTT and DCD
Improved get PTT state handling in dummy backend
Simplify closing of device files
Repair a regression with the dummy get PTT functionality
Revert "Add debug to serial.c"
Repair a regression with the dummy get PTT functionality
Revert "Add debug to serial.c"
Fix regression with slow responses from SmartSDR causing errors
Deal with remote PTT type at the client end
Avoid 'echo -n' as macOS sh doesn't support it
Fixing an operator precedence defect
Updates to the TH-D7A/E back end
Less ambiguous variable name and repair merge issue in prior commit
Add missing config parameters for rig power on/off and screen-saver
New power on option rather than power on/off
Make version recording safe for parallel builds without breaking make dist
Make version recording safe for parallel builds
Ensure old hamlibdatetime.h headers in the source dir are ignored
Merge branch 'safe-scs-versioning' of ssh://git.code.sf.net/u/bsomervi/hamlib into safe-scs-versioning
Fix make dist versioning
Use BUILT_SOURCES make mechanism as intended
Fix rebuild dependency
Build hamlibdatetime.h every time
Force copy over existing
Minimize rebuilding
Correct use of sh if
Another attempt at a reliable SCS version header generation
Remove temporary file
Add missing shared library API exports
Add missing export definition
Blaine Kubesh (8):
added Icom803 to icmarine
added Icom803 to icmarine
added Icom803 to icmarine
Update ic-m803 remote-id to 20
Update icm803.c
Update AUTHORS
undo author changes
Update icm803.c
Bob Freeman (1):
New CNCTRK rotor backend
Brian G. Lucas (10):
Pretty much a complete re-write of thd72.c, since the old one didn't work at all. Many commands have been tested with real hardware. But more work remains to be done.
WIP: thd72 driver. More level, func, and parm stuff works.
WIP: thd72 driver. Try to simplify the menu based interface.
WIP: thd72 driver. First cut at get_channel(). Other cleanup.
WIP: thd72 driver. More interfaces implemented. Other cleanup.
Implement some more interfaces. Comment out get_chan_all_cb because the block read routine doesn't work.
Fix a format so that it works with Windows. Can't test it because I have no Windows machines.
Fix RFPOWER level for FT-450D. It uses 5-100, rather than 0-255 that the FT-450 does.
In newcat_open(), initialize rig_id in case any subsequent commands need it.
Some calls to thd72_get_menu_item where passing wrong values for range check.
C-Elegans (1):
Add ability to have rigctld display transverter frequency
CJ (1):
fix windows makefile
Charles Suprin (7):
Add file for TM-D710 support.
Merge branch 'master' of ssh://hamlib.git.sourceforge.net/gitroot/hamlib/hamlib
Add D710 to riglist.
Add D710 code to kenwood library.
Register D710 interface.
Initial D710 Implementation.
Register D710 interface.
Charles Suprin, AA1VS (3):
extend th_get_vfo_char to support D700
Changed th_set_freq to round and select step size to use. Allows 6.25kHz and 5kHz channelization.
Use new th_set_freq for TM-D700
Chris Karpinsky, AA1VL (7):
add serial_flush() method to clean rx buffer
initial stab at this for the Yaesu FT-817
add ft817.*
add ft817
bump the backend status to ALPHA
Initial entry of cgirig giving ability to use hamlib from a web browser.
increased post write delay to 300
Chris Ruvolo (4):
TS-690: deal with optional tone board using TS-450 logic
TS-690 does not implement the PC command to get/set output power level
TS-690 does not implement the GT command to get/set AGC rate
TS-690: bump version
Christoph Berg (2):
ic7610: Re-add send_morse
Implement netrigctl_stop_morse
Chuck Hemker, N2POR (1):
Use RIG_TARGETABLE_MODE in rig_set_mode and rig_get_mode
Chuck Ritola (8):
Use loop to ensure RS-HFIQ hears first command. Closes #730
Add ability to read TX drive level
Implement board temperature reading for TEMP_METER
Parse and store RS-HFIQ firmware version.
Firmware version check before power meter query.
Merge branch 'master' into rshfiq-aug2021
Map FCDPP LNA and Mixer Gain as PREAMP values. Closes #766
Map FCDPP LNA and Mixer Gain as PREAMP values. Closes #766
DL1YCF (6):
Merge branch 'master' of https://github.com/Hamlib/Hamlib
Merge branch 'master' of https://github.com/Hamlib/Hamlib
Merge branch 'master' of https://github.com/Hamlib/Hamlib
Merge branch 'master' of https://github.com/Hamlib/Hamlib
Merge branch 'master' of https://github.com/Hamlib/Hamlib
Merge branch 'master' of https://github.com/Hamlib/Hamlib
Dale E. Edmons, KD7ENI (19):
Added comments to commandline in rigctl (second time) --Dale
Started TS-2000 update/overhaul --Dale
Copied too much stuff, backed out what I broke.
Bring ts2k.c more in line with current CVS.
Changed ts2000.c to ts2000.h.
Start of rig menuing functions.
New file.
Renamed ts2000.c.new ts2000.h
Bring code more in line with CVS code.
Changes often, so added status. Will delete when things stabilize.
Corrected status to CVS branch.
Renamed new ts2000.c to ts2000.h
Wouldn't compile. Removed ts2k.c. Haven't got all new rig.h stuff removed.
Temp kludge to make ts2k.c compile (keeps Hamlib from compiling!).
Updated status.
Added working TS-2000 files. There are some changes left out but this is the minimum I could commit and have a functional rig. The cost is that I've broken kylix and others that duplicate rig.h. I'm in the process of repairing the damage. Please be patient. I hope a day or so, but am asking for up to a week. E-mail me about *anything* you find broken. Kylix (and similar) is (are) known to not work.
Changed name back to original.
Had to re-run automake kenwood/Makefile.
1) Updated branch_ts2k with respect to HEAD. 2) Working ts2k_menu. (only in RIG_MODEL_TS2K) 3) Split TS-2000 into experimental and standard versions: RIG_MODEL_TS2000 = standard, RIG_MODEL_TS2K = experimental. 4) Basic command parser in tests/rc. Will open/close rig or copy a freq from one rig/vfo to another rig/vfo. Very cool. Very basic. Very experimental. 5) Added test programs. a) testcmd - calls parser (no command prompt yet!) b) testts2k - replacement for testrig (with trivial modification) c) testptt - testts2k/testrig should not transmit. TX stuff in testptt. 6) Used crowbar to merge HEAD into branch_ts2k. Working on clean-up. 7) I'm sure I've forgotten or neglected to mention some other stuff.
Daniel Estévez (2):
Fix DIG MODE for FT817-ND
Fix DIG MODE for FT817-ND
Daniele Forsi (5):
Set the executable bits on py3test.py
Fix spelling errors
Fix more spelling errors
Fix more spelling errors
Fix typos
Daniele Forsi IU5HKX (9):
Fix a [missingInclude] "information" when running cppcheck --check-config
The -M option needs an argument like its long version "multicast-addr"
Fix lintian warning: macro 'RG' not defined
Fix lintian warning: macro 'IN' not defined
Fix spelling errors
Remove unused includes related to times and dates
Remove unused includes of math.h
Remove unused includes
Revert unwanted changes
Dario Ventura (3):
New Prosistel rotor backend from IZ7CRX
Add elevation code to Prosistel backend
TS2000 Satellite mode and Gpredict
Dariusz Bismor, SQ9KEJ (1):
rigmem: implement CSV file loading
David Brewerton M0EZP (1):
FT990UNI patch contribution from M0EZP
David Fannin (1):
Submission for new backend model (134) for Yaesu FT-DX1200
Davide Gerhard (3):
tests/{memcsv.c,memsave.c}: partially revert commit 4072f9f4
ic746.c: correct chanbuf length, fix channel structure and support split
ic746.c: add ic746pro_set_channel() to load memory from csv
Dawid SQ6EMM (3):
Add method to build inside docker
Let SEND_MORSE and SEND_VOICE_MEM be announced as capabilities.
Allow \send_voice_mem to be used over network and tested in dummy rig
Dawid Szymanski (2):
ICOM Voice Keyer implemented.
typo fix
Diane Bruce, VA3DB (5):
- first cut at fixing configure to recognise --without-tcl-binding and --without-python-binding options
- gt_HEADER_INTTYPES_H is definitely bogus here, leftover from what?
- document debian/FreeBSD needs for AUTOMAKE etc. - add in libtoolize which should be there
- These should have been commented out.
- Extra comma on RIG_STATUS_BUGGY can cause a compiler error.
Dieter Röver (1):
Fix bug in vfo_comp calculation in Hamlib
Ekki Plicht (DF4OR) (2):
New model Icom IC-R8600
Patch for Icom DCS code handling
Elliott Liggett (1):
Added functionality for the IC-7300 auto antenna tuner
Eriks Dobelis (2):
ft817: adding delay before next retry after returning from tx to rx
ft817: Moving delay value into #define section of the header
Ervin Hegedus (9):
RIG_PASSBAND_NORMAL wasn't handled correctly when rig_set_mode() was called - fixed
Fixed SWIG `Setting a const char * variable may leak memory' error
Fixed Kenwood filter cmd when passband is set to 500Hz
Merged from upstream
Merge branch 'master' of http://git.code.sf.net/p/hamlib/code
Added Lua binding and demo script
Added new example to Python demo script (set/get float type level)
Change variable length argument handling in affected functions
Fix two typos
Ervin Hegedüs (1):
rig.swg: New properly formatted macro
Evgeniy Titorenko (1):
Add Radant AZV-1 Rotator controller protocol.
Francois Retief (21):
Added read_serial function to read strings from a port.
Corrected some comments
Added code to hexdump to right align ASCII dump column
added private caps for rig termination character
add private caps and more commands.
Changed to a new transaction function and adde quite a few commands.
add private caps to store the termination character of Kenwood rigs commands.
added a kenwood_init and _cleanup routine for priv caps & priv data.
Added a new function: LCD Lamp ON/OFF (for Kenwood TH-7DA)
check trn state of rig in rig_open.
Initial commit of Kylix binding
New backend for rotators
New RPC backend for rotators
Added rot_move function
Fix macro name
Added rot_move function
Added easycomm and rpcrot backends
Fixed circular dependency for rpc.rigd and rpc.rotd
regenerated
Added IC-910 rig.
Added constants for the IC-910 rig.
Frank Goenninger (3):
Add ADAT ADT-200A backend
adat updates from Frank, DG1SBG
ADAT fixes on Windows
Frank Singleton, VK3FCS (165):
Initial revision
Initial revision
*** empty log message ***
*** empty log message ***
*** empty log message ***
Initial revision
Initial revision
*** empty log message ***
*** empty log message ***
added build_all ,cleanall and verify targets
*** empty log message ***
initial top level makefile
add some things
initial import
initial import
initial import
fixed some typos
use rig_open and rig_close
added rig_open and rig_close
fixed cmd_sat_on / off
added sat-on and sat_off to test
changed cmd_get_rx_status, must do tx also
updated test()
all reads use while (1) and break
added ../common as object path
added rig_open and rig_close
using rig_open and rig_close and serial.h
use common dir for serial stuff
use ft747 on serial port /dev/ttyS0
read uses while(1) and break
use while(1) and break
added read_sleep
use read_sleep now from serial.h
using read_sleep from serial.h
had rx and tx status swapped (document error?)
removed cmd_get_update
using CVS instead of RCS directories
use MODE_xx defines
cannot use const int in case statements ?? so use #define instead
use #defines for MODE_XXX used in case statements
working out freq conversion, unfinished
playing with test routines
long int cmd_get_freq_mode_status_main_vfo(int fd, unsigned char *mode);
long int cmd_get_freq_mode_status_main_vfo(int fd, unsigned char *mode)
frq = cmd_get_freq_mode_status_main_vfo(fd, &mode);
starting with the cmd_set commands now
starting on cmd_set commands now
starting on cmd_set_freq commands now
add scanning todo
now set sat rx and tx freq and mode also
fix typo
dump raw hex data when writing and reading
trying some cms_set_freq_xxx commands
added routines for dec <-> packed decimal conversion
minor
added generic hex dump routine, static void dump_hex(unsigned char *ptr, int size, int width);
removed unwanted debug printf's
removed dump_hex from here..
calc_freq_from_packed4 is about to be replaced
calc_packed_from_char and calc_char_from_packed now here
cleanup
cleanup
void dump_hex(unsigned char *ptr, int size, int width);
adding dcs tables and repeater offset in Hz
describe faulty yaesu documentation
added README.license for GPL
added GPL license info
included full GPL license
Updated docs to point to http://sourceforge.net/projects/hamlib/ and added a C code snippet on how to use the API.
added -I$(COMMON_DIR) to find rig.h
added -I$(COMMON_DIR) to find rig.h
adding capabilities
initial capabilities stuff
starting to add rig_caps stuff
starting to add rig_caps stuff
starting to add rig_caps stuff.
added GPL stuff and comments
adding rig_caps stuff
adding rig_cap stuff
adding rig_caps stuff
add capabilities and preferences
adding rig_caps functionality
adding rig_caps stuff
frontend reduction on backend function namespace - phew !!
frontend API clarification
removed old open_port2() using old rig_caps
fixed some typos, added 3 more candidates for API
missing ; in some enums
converting to frontend/backend structure compiles ok
removed open_port() and write_block()
removed open_port() and write_block()
fixed typos, added &ft747_caps in rig_caps
changing to frontend/backend style
converting to frontend/backend style
added 3 more cmd_* for API examples
Example of setting rig Main VFO to 439.700 Mhz FM
cleanup comments
added extern const struct rig_caps ft747_caps;
still thinking about set/get strategy
minor updates
added extra rig caps
added some set/get examples with return code checking
added testrig to Makefile, no linking yet
added usleep to read_sleep()
updated rig_caps structure
*** empty log message ***
test making a shared lib (at last) for the frontend - more todo
test making a shared lib for the frontend - make hamlib
describe frontend/backend structure
updated code snippet example
started ft747_set_ptt and ft747_set_vfo
starting to implement set/get pairs
added typedef enum ptt_type_e ptt_type_t;
added VFO types to enum
starting on libhamlib Makefile, added ./lib and ./include under common
make, make install, and make clean work ok, using ./lib and ./include directories also.
make, make install, and make clean work ok, using ./lib and ./include directories also.
removed "make verify". Added reference to common/Makefile
added printf("testrig:main() has been called \n"); for testing linking
makefile for testing testrig linking
alternative rig_base declaration removes references to rig_caps at compile time. should populate it another way -- FS
added printf's to confirm rig.c (hamlib) is being called ok
better libhamlib.so version :-)
added ft847_open and ft847_close to enable CAT ON/OFF
added ft747_open and ft747_close
updated lib names for backend to libhamlib-xxxxx.so
API updates - added set/get_mode
merge with TRN stuff and add some set/get_mode and vfo stuff
added post_write_delay
cvs mails to hamlib-cvs-digest
cvs mail update works ok :-)
minor fixes
updated ptt/mode/vfo
added set/get freq to use generic bcd etc
more set_freq() examples
1. Added VFO as target for some set/get cmds. 2. ./testrig still runs ok using RIG_VFO_CURR.
minor update to active VFO handling in _set_vfo
some new defines for FT747_VFO_A/B
minor updates to active vfo handling
added ptt handling example, stand back !
trying different approach to storing cmd sequence. _set_ptt is being converted. Needs tidying up though. Some sequences are complete, and can be read from static data. Incomplete sequences will eventually be copied form static declaration, and completed in priv data.
Removed static stuff from functions. Also, begin to implement table driven command translation from API to rig native. priv now contains a cmd table that is used for backend commands towards rig.
Added some new freq/mode combinations.
converting ft847 to table driven, similar to ft747.
more table driven stuff for ft847. cat/ptt/freq being converted.
Added ft847_send_priv_cmd(), converted some part of API to use this. Added _set_mode to work now. TODO: put _send_priv_cmd into yaesu.[ch] so ft747 can use also. Turned on PTT also (stand back)..
rig_cleanup and rig_close not calling backend
removed unused calc_ functions.
removed old API functions, general cleanup tested rig_close and rig_cleanup
Initial release, common yaesu declareations etc.
add version tag
nseq uses YAESU_CMD_LENGTH
Initial yaesu Makefile
Moved from ft747 and ft847 dirs
common yaesu handling
common yaesu dir
Begin to use common yaesu code
general cleanup, added _send_priv_cmd
added targetable_vfo value to caps
minor cleanup
ChangeLog history started
Initial import for ChangeLog handling
starting to convert rig struct to readable form
more of convert rig struct to readable form
Changelog update for HAMLIB-1.1.1
Georges Auberger (1):
Add product id for CM119B chip. Used in KURI adapter designed by W7NX.
Gerardo Richarte (1):
gs232b.c: Improve get_position string parsing
Gisle Vanem (1):
Enable verbose mode in bindings/pytest.py
Greg Troxel (1):
Warning about dodgy code in drake.c
HB9EIK (4):
Initial release ELAD FDM DUO
Update ELAD files
Update build system for ELAD backend
Update copyright for fdm_duo.c
Hans Van Ingelgom (1):
Added Peaberry V1 and V2 models
Hegedüs Ervin (4):
Merge branch 'master' of http://git.code.sf.net/p/hamlib/code
Check SWIG string functions for some languages
Leave off multiply 'typedef const char * const_char_string' definition (in rig.swg and rotator.swg)
Fixed int[10] type variable error in bindings
Jae Stutzman (5):
Added HPSDR backend
Clears potential garbage data in read buffer prior to command being sent
Updated PiHPSDR backend defaults
Use Windows ioctlsocket to avoid buffer overrun
Added new AGC control for PiHPSDR
James Watson, HZ1JW (2):
Added ic7200 to icom
Corrected modes in ic7200.c
Jaroslav Skarvada (2):
Fix hardcoded pcconfig libdir
Fix serial_port DCD squelch
Jeroen Vreeken (9):
Add support for GPIO PTT.
Add missing breaks and improve error messages
Add Dorji DRA818 modules (VHF and UHF variants) Also works with NiceRF SA818 modules
Merge branch 'master' of git://git.code.sf.net/p/hamlib/code
Small fixes to DRA818 volume handling
Add GPIO and GPION options for DCD. Also bump abi version since the config params struct needed resizing.
Merge branch 'master' of github.com:Hamlib/Hamlib
GPIO working after debugging
Merge branch 'master' of github.com:Hamlib/Hamlib
Johan Ström (1):
Backup serial options on open, restore on close
John Paul Adrian Glaubitz (1):
dummy/dummy.c: Fix unaligned access in dummy_get_level()
Jonathan Bastien-Filiatrault (3):
Correct FT; command that does not exist on the FT-891.
Allow setting split mode without smashing the VFOB frequency.
Scale power values correctly for Yaesu FT-891.
Jonny public (1):
ether6: New rotor backend from Jonny, DG9OAA
Joop Stakenborg, PG4I (116):
update (kenwood is not a WIP anymore)
first implementation of kenwood_get_ptt
enable get_ptt for this rig
add get_ptt for this rig
additional protocol checks and cleanups
fix signal strength
add RIG_LEVEL_RFPOWER
fix_compilation
add rit capabilities
bring comands in sync with other kenwood rigs
add rit capabilities
send_morse added
explain set_rit
fix get_ctcss_tone by using IF command
typo
add xit capabilities
add set_level and get_level
bring rig in sync with other kenwood rigs
bump version numbers
nothing returned by the rig for these commands
fix get_level_agc
fix set_level_agc
getting in sync with the debian 1.1.2 package
remove template files
initial checkin
make this NMU for now
correct the path for copying files in the apropriate package
do not install the old changelog
versioning not used
move .la, .a, .so files to the correct package
include rpc.rigd and rpc.rotd
include pkgconfig support
don't create shlibs file for drake, jrc and easycomm libraries
move hamlib1 to the top so the documentations gets installed correctly
make building easier, call autogen.sh
INSTALL file not used
build the documentation package
we don't have to call configure twice
cleanup
remove some build dependencies and don't call autogen.sh
ts450s uses IF command for get_vfo, get_freq and get_mode
minor bugfix, bump to beta
add CWR and RTTYR
this rig does not have a command for reading IF bandwidth
retrieve passband with FW command
passband should be calculated after mode is set
use rig_passband_normal here
various lintian fixes
one last lintian fix
use FW command to set bandpass
cw filters for normal, narrow and wide
more filters
get_mode and set_mode for this rig
filters
some comments
correct rit
add get_level
cleanups
more modes
set_level for this rig
should use kenwood_get_freq
minor bug
add rpm support
need hamlib.spec for 'make rpm'
make rpm will fail with a '-' in the version number
a working spec file
update debian build for rotorez and fodtrack, minor fixes
unofficial
fix the debian build script, new maintainer
update the debian build tree to the latest
correct baudrate for the ts-950, use the information field IF for get_vfo by default (supported by most kenwood rigs), ts870s will use the much shorter FR command for get_vfo
correct baudrate for some rigs and add ts-950 to the id_list
ts-850 returns ID 009 according to martin, OK1RR
fix 'make rpm'
build for hamlib-1.1.5
not needed
sync with latest debian package and add tcl, c++, python and perl bindings
correct spelling
s-meter calibration by Matt Dawson
basic functionality by Matt Dawson, tested with grig and xlog
lifetime e-mail address :-)
sync with latest debian release
more functionality, mode and frequency get by Matt Dawson
only switch tx vfo is split is on
set attenuator level
export convenience function get_kenwood_level, so they can be use by other backends
add RIG_LEVEL_SWR, copied from ts850
add RIG_LEVEL_COMP, RIG_LEVEL_AGC, copied from ts850
bump version, no preamp
really add ALC read this time, only change meter if needed, cleanups
split has_get_level and has_set_level
fix coding, python2.4 compatibility
fix compilation warnings
more compilation warnings nuked, use tone_t for ctcss_list
use size_t
fix more compilation warnings, int->size_t, unsigned char->char
more unsigned char->char and int->size_t transitions
set functions should have ack_len zero, also need to check other rigs
make sure we use ack_len=0 for functions that return nothing (set functions)
more unsigned char->char and int->size_t transitions
extend rig capabilities, patch by Tom, DL1JBE
add RIG_LEVEL_STRENGTH to caps, set post write delay to 0 and do some cleanups
re-establish post-write delay
remove rpath backdoor
long long really needed here?
updates by matt, GW0VNR
long long really needed here? - patch by diane Bruce
distribute footer.html
correct set/get power
try better s-meter readings
packages renamed
obsolete
sync with latest debian release
no need to link to python
sync with latest, python changes
another debian update: use 'make distclean' in the rules file
Joshua Lynch (4):
initial SatEL rotator support
factored io functions out. improve reliability...i hope.
fixed state bug. reconnecting would disable motion every other connect.
merged upstream/master into master
Juergen Rinas, DC3BW (4):
added antenna switching...
added a few get_level/set_level get_function/set_functions.
* fixed set_func (concerns most kenwood rigs) * added 115200 to the list of baudrates in probeallrigs_kenwood()
* fixed ptt * expanded frequency range (available after firmware update) according to http://www.kenwood.com/i/products/info/amateur/ts_480/firmware/pop_ts480_e.htm * added tuning steps * added filter list * increased version info
Julian Cable (3):
WinRadio G313: Updates from Julian Campbell
wrg313api.c: Fix Win32 (MinGW) build issue
Use Automake conditionals for G313 build
Juuso Lehtinen (4):
Add get & set RIG_LEVEL_NB for Yaesu rigs.
Fix set level METER for Yaesu rigs
Add ID, VD & Comp meter cals for FT991
Add better defaults for newcat meter cals
Kamal Mostafa (3):
Fix mingw32 cross-compilation procedure and config
Do not let macros/ac_python_devel.m4 trash CPPFLAGS and LIBS
Fix spelling errors
Kamal Mostafa, KA6MAL (19):
Hard-code length of hamlib_version and hamlib_copyright strings to stay compliant with hamlib 1.2 ABI and avoid spurious "consider relinking" warnings from dynamic loader.
Removed stale debian/ dir from the hamlib source (it is maintained in the Debian diff and isn't useful in this tree).
Update bundled libltdl (libtool) to version 2.2.6b to address CVE-2009-3736. - autogen.sh: never downgrade our bundled libltdl/ (only run libtoolize if system version is newer than our bundled version). - autofixer.sh: script removed as libtool 1.x is no longer allowed. - configure.ac: (not enabled) optional setting to deprecate embedded libltdl/.
Added Kamal Mostafa and Jaime Robles as maintainers for Debian packaging.
Fix build --with-python-binding breakage introduced by Python 2.6: Do not reference LOCALMODLIBS, else it will add libraries to our link line (e.g -lssl) which are not necessarily installed.
Elektor 507 frequency selection resolution improvements, contributed by John Nogatch AC6SL.
Move backend libraries into /usr/lib/hamlib directory.
Force automake to invoke the C (not C++) linker in kit/ when no C++ is in use.
python: fix --with-python-binding configure macro
fix configure.ac paths for FreeBSD
Remove bundled libltdl (libtool)
README.developer: restore libtool prerequisite text
Fix segfault on improper -C syntax
configure: add check and advice for missing ltdl.h
configure: refine advice for missing ltdl.h
source warnings cleanup: rpcgen-generated code
source warnings cleanup: #if-0 out a few unused routines
source warnings cleanup: #ifdef out unused FT-840 routines
source warnings cleanup: rotorez_rot_reset wrapper for stop
Kayne (1):
Updated k3_set_modes to work on KX3
Kosta Arvanitis (1):
Allow IC-7410 to send cw messages
Kārlis Millers (1):
Merge pull request #1 from Hamlib/master
Ladislav Vaiz (3):
Add Android build support
Android build updates for monolithic build
Initial support for FUNcube Dongle Pro
Lance Conry (1):
From a pull request but modified to fit current codebase and clean up warnings https://github.com/Hamlib/Hamlib/pull/1071
Larry Gadallah (1):
AR7030+: Error reading signal strength for low signal levels.
Larry Gadallah, VE6VQ (20):
Added Larry Gadallah as maintainer of AOR AR7030+
Added AOR AR7030 Plus
Added caps for AR7030+
Added caps for AR7030+
Added AR7030+
Alpha version of AR7030+ backend
Alpha version of AR7030+ backend
Rationalized naming convention, ran everything through lint.
Rationalized naming convention, ran everything through lint.
Fixed SVN tags
Fixed SVN tags
Added AR7030P utilities in ar7030p_utils.c
Initial version of utility functions for AR7030 Plus receiver
Removed utility/helper functions, added/updated Rig API functions
Added new I/O helper functions, IR code definitions
Added private data to support channel information
Added init/cleanup functions, started implementation of mem/channel access functions
Added prototypes for pbsToHz() and hzToPBS() helper functions. Added comments to denote mey_sq, mey_pb, and mey_id labels
Added implementation for pbsToHz() and hzToPBS() helper functions.
Added various memory/VFO functions.
Lorenzo Santina (2):
Fixed rigctl ignore error command line
Fixed c++ exception for visual studio compiler
Magne Mæhre (1):
Enable set_powerstat (turning radio on/off) for IC-7100.
Malcolm Herring (62):
init branch
init branch
New model: Icom IC-R6
Icom IC-R10 & 20 testing complete. Move to Beta
ignore build
Complete R6 commands
Add IC-R30
daily
fix tones
Merge remote-tracking branch 'Hamlib/master'
update
Merge branch 'master' into icr6
ICR6 new functions
merge
update
Merge remote-tracking branch 'Hamlib/master'
commands 00-15
Merge branch 'master' into icr30
icr30 updates
Automatically detect CI-V echo state
Icom R8600 to Alpha
Update contributors
Merge branch 'master' into origin/master
Fix Icom DCS SQL funnctions
Merge remote-tracking branch 'Hamlib/master'
Merge remote-tracking branch 'Hamlib/master'
Prepare for D-STAR implementation
Merge remote-tracking branch 'Hamlib/master'
Initial implementation of icom extended operations
more extended operations
Merge remote-tracking branch 'Hamlib/master'
more ext functions
fix merge conflicts
more ext_cmd updates
ic7100 ext functions
Merge remote-tracking branch 'mdblack/master'
Merge branch 'master' of https://github.com/malcolmh/Hamlib
add token list for ext operations
Merge remote-tracking branch 'mdblack/master'
more ext operations
Merge remote-tracking branch 'mdblack/master'
custom ops using ext ops scheme
custom level ops
Merge remote-tracking branch 'mdblack/master'
Merge remote-tracking branch 'Hamlib/master'
add scope functions
update IC7100
update rigs for new functions
Merge remote-tracking branch 'Hamlib/master'
new directory structure
Merge remote-tracking branch 'Hamlib/master'
correct powerstat caps
Merge remote-tracking branch 'Hamlib/master'
New custom parm implementations
restore get_powerstat
correct rig_close cap
Merge remote-tracking branch 'Hamlib/master'
Merge remote-tracking branch 'Hamlib/master'
Merge remote-tracking branch 'Hamlib/master'
add g/set_ext_func to API
additional error checking for extended operations
Add Macports to README.osx
Mark J. Fine (25):
Fixed post-write-delay timing
Added support for ECSS/FAX and meter strength
Added support for meter strength
Added ECSS support to R8B and reconfigured default filter modes
Reconfigured default filter modes
Updated to reflect recent changes within v1.2.2cvs-2
Fixed CWPITCH function on IC-R75 to use 'set mode data' command. Added level granularity steps
included other rig_ prefixes
fixed get_powerstat to read correctly when memory channel is blank
Added memory switching function in set_vfo Added set memory channel# in radio in set_mem
Added set_vfo command for vfo/mem switching Corrected handling of "vacant" memory channels
Correctly detect if in memory mode in get_vfo() Reduced large decision trees with bitwise math
Added set/get channel functions
Updated set/get channel functions
Made get_channel aware of untunable blank memory channel
accounted for dual preamp (10 & 20db)
Fixed passband width return for IC-756PROII
Added FM narrow to passband spec
Added a provisional define for a variable bandwidth control
Added a provisional variable bandwidth control to the RIG_LEVEL enumeration
Added provisions for a variable bandwidth control Added provisions for a tone control Corrected problems with Squelch (SQL) and Notch (NOTCHF) controls
Added provisions for a variable bandwidth control (BWC)
Fixed low-end of freq range from 100kHz to 10kHz.
Fixed several differences in 535/545 commands
Added missing manual notch switch for the NRD-545
Martin Cooper (2):
Don't expect a response when none is required.
Don't send EasyComm I commands to EasyComm II rotators.
Martin Ewing (7):
Add test for valid set frequency, esp. for VFOA (ham band only) Expand valid range_lists for full hardware ranges Fix tt565_transaction to allow Morse commands.
Orion.c: remove spurious debug statement.
implement level settting and misc fixes
remove debug stmt
Increment Jupiter version
Trim TS950 commands that are not provided by CAT
jupiter.c: Updates from Martin, AA6E
Martin Ewing, AA6E (69):
specified buffer lengths, added default vfo A setting
Fix SWR & S-meter, set ATT, set AGC, add rough STR_CAL func.
Fix timeout, add retry, better S-mtr scale
various bug fixes
Added RIG_LEVEL_CWPITCH, RIG_LEVEL_KEYSPD, send_morse()
Added RIG_FUNC_TUNER, RIG_FUNC_LOCK and RIG_FUNC_VOX, fixed MEM_CAP.
Added VFO_OPS, promote to Beta
Support LEVEL_VOX, VOXGAIN, ANTIVOX Support LEVEL_NR as Orion NB setting (firmware bug), FUNC_NB -> NB=0,4
Add get_, set_ant (ignores rx only ant)
Added Orion, Orion 2 info
Squashed warnings about signedness
Orion S-meter cal
minor - add doxygen info for enums
minor - doxygen parameters
doxygen formatting
add comments
info on generating docs
doc improvements
add comment
documentation
documentation
allow atten = 0 dB
patch from SM6PPS
fix enum documentation
documentation page
documentation
documentation
split orion.c and add doc info
documentation
SM6PPS mods for AOR 5000a
further rx-320 mods by Ken Prox
use binary mode VFO requests
correct CHANNEL_CAPS sytax
Dead simple sample Hamlib program
Correct float vs int interpolation options
Add autodetect version 1 or 2 firmware (using rig_get_info). Correct V1 calibration. Make V2 calibration the default. Signal RIG_LEVEL_STRENGTH supported.
Moved firmware detection to new tt565_open routine, where it is done every time the rig is opened.
Add more functions to example program.
Ensure printable get_info string
Fix bug that seg faulted when get_info returned null. (No reward points!)
Add S meter operations to sample program.
Adjust retry & timeout values to help in case of no response from rig, i.e., if rig power happens to be off. Prettify some code indents.
Better error handling, reliability for serial I/O. Misc prettification.
TT Omni VI / Plus improvements
Fix typo
Fix Omni VI PTT function
Update Icom info
Declutter
Omni VI memories, rit/xit
Fix serial I/O error checking
Add author. (credits info added to web page, also)
Switch back to ASCII freq. setting because of hardware(?) bug.
Add AF, RF gain and squelch level capability.
Add thanks to W1RFI & ARRL
minor changes
RIG_STATUS_ALPHA reflecting initial tests.
fix missing comma
use rawstrength.i which matters in PPC compile
fix string handling in LEVEL_RAWSTR
Orion - implement RIG_LEVEL_STRENGTH
Example updates
Orion: Allow frontend to handle RIG_LEVEL_STRENGTH
Minor comment re rit/xit
Downgrade ERR to WARN (i/o retry)
Init revision - tnx Stephane
Autofixer sets up for libtool v1 or v2
autofixer.sh supportin libtool v1 and v2
minor update
repair echo cmd
Max Lock (1):
Addition of support for CM108B PTT
Michael Black (1393):
TenTec Omni VII update from W9MDB
New XG3 backend
Fixes to termios.c on W32 targets
xg3 patch
Check TS-590S for EU or US firmware
New backend for FT-991
Flush the debug stream
Omni VII to set VFO_CURR correctly
Omni VII patch for WSJT-X
FT-991 patch
Small FT-991 patch for WSJT support
Omni VII patch
FT-857 and FT-991 patches
Fix possible frequency overflow on Kenwood and Yaesu
Add get_freq to FRG-100
Clean up clang warnings on adat.c
Clear up a clang compiler warning in kenwood/elecraft.h
Clean up clang warnings in tentec
Fix port->pathname checks
Quell clang warnings in tests directory
Various Yaesu updates
Simply define TRUE to 1 in omnivii.c
Allow the ft757gx to work with WSJT-X.
Remove input redirects in autogen.sh
Initial support for the IC-7300
Add send_morse to icom rigs
tmd710 patch
Icom frame patch
Exposed constants via function calls
Remove define
Merge branch 'master' of https://github.com/N0NB/hamlib
Changed some modules to LGPL in lieu of GPL
Fixed buffer overflow in rigctl_parse and rotctl_parse
Merge branch 'master' of https://github.com/N0NB/hamlib
Move K3 DT0 before mode switch, add version info to electraft rig open, WSJT-X VOX rig split now works
Merge branch 'master' of https://github.com/N0NB/hamlib
Added IC-7850/51 -- works with WSJT-X
Merge branch 'master' of https://github.com/N0NB/hamlib
Add ic7850 ic7851 -- works with wsjtx
Add ic7850 ic7851 -- works with wsjtx
Merger 7850/51 into 785x
Fix ft991_get_mode
Added ft891 backend
Fix ic785x default addr to 0x8e
Fix FT-891 recognition
IC-M710 now working with WSJST-X
Add icm710.h to icmarine Makefile.am
Merge pull request #1 from Hamlib/master
Fix FT857 to return the SMeter-based value
Reduce debug info in flrig.c
Change RIG_MODE and RIG_FUNC to 64-bit values
Merge hamlib head
Add PRXll macro for 64-bit use
Fixup for 64-bit in memcsv.c
64 bit mods to netrigctl.c testrig.c
Add TS-890S as derivative of TS-480 plus new modes
Add XHCG to ic706.c
Change rmode_t to uint64_t and remove unneeded casts
Fix RIG_MODE structure in src/msic.c
Fix some 64bit items and add RIG_FUNC_NB2 for TS-890S
Suppress GCC unused-return warning
Fix rig_idx2settings for 64-bit sprintf_list functions
Fix flrig when WSJT-X startup causes rig mode change Increase flrig timeout value Add USB mode to flrig Fix flrig memory leak Fix bug where constant value was being trashed
Add PKT modes to ts590.c
Add BC2 and NB2 functions for newer kenwoods Change RIG_SETTING_MAX for 64-bit compatibility
All kenwoods to have 3-char commands for functions and return whatever value the rig returns instead of 0/1 Changes to add more ts890 capabilities, e.g. NB2, BC2
Fix kenwoood BC BC2 returns
Fix kenwood BC BC2 return
merge master
...
[truncated message content] |
