[Hamlib-developer] Fwd: Re: Kenwood TS-480 (here: TS-480 SAT)
Library to control radio transceivers and receivers
Brought to you by:
n0nb
Menu
▾
▴
[Hamlib-developer] Fwd: Re: Kenwood TS-480 (here: TS-480 SAT)
|
From: Stefan U. H. <do...@we...> - 2017-11-03 21:07:43
|
Hi Christoph & Nate,
thank you two for your replies.
First of all sorry for some confusion. I was talking about a *TS-480
SAT*. Got confused with the 850, because that was my rig before ...
All I am talking is TS-480, OK?
Am 03.11.2017 um 10:08 schrieb "Christoph v. Wüllen":
> Am 02.11.2017 um 21:06 schrieb Stefan U. Hegner <do...@we...>:
>> Hi folks,
>>
>> according to the rig-matrix, the TS-480 is still "untested". On the web I found a few reports, that it works nicely, but also some people having trouble (like me ...).
>>
>> I want to take the chance to smooth out the bumps and find the hickups.
>>
>> Setup:
>>
>> My Kenwood TS-850 SAT, latest Firmware 1.07, is hooked via a DB9 serial ("straight trough") connection on /dev/ttyS0 to my computer. the TS-480s Menu "56" is set to 115200 bps, same is the software. Wher applicable, the connection is further set to 8,N,1, RTS/CTS-Handshake.
>> Communication works @115200 bps with Kenwoods ARCP 480 (V. 1.1) using Windows, with Winlink-Express 1.44 (either Windows or Linux & Wine) and with flrig (V. 1.3.24) using Linux.
> This looks a little bit like problems with different VFOs,
> so first make sure that the „default VFO“ is engaged in your rig.
OK. - I set VFO "A" and Antenna "1", current Freq is 3.584.000 (80mtrs).
> There might be problems reading the frequency of the default VFO
> (VFO A) if actually VFO B is active on the rig.
>
> In principle one could compile rigctld from the sources and
> put it some debug commands. But first make sure „VFO A“ is active.
OK. - Well, we'll see, whether this is necessary.
Am 03.11.2017 um 12:15 schrieb Nate Bargmann:
> Both rigctl and rigctld support the -v option where up to five
> 'v'characters enable tracing statements coded into the library and
> thebackends, e.g. '-vvvvv'.
OK, here some Data from rigctl (1.2.15.3) again with the -vvvvv Option set:
$ rigctl -m 228 -r /dev/ttyS0 -s 115200 -vvvvv
rigctl, Hamlib 1.2.15.3
Report bugs to <ham...@li...>
rig:rig_init called
rig: loading backend kenwood
initrigs2_kenwood called
rig_register (213)
rig_register (201)
rig_register (225)
rig_register (203)
rig_register (204)
rig_register (216)
rig_register (224)
rig_register (205)
rig_register (207)
rig_register (209)
rig_register (210)
rig_register (222)
rig_register (214)
rig_register (230)
rig_register (221)
rig_register (229)
rig_register (202)
rig_register (211)
rig_register (206)
rig_register (208)
rig_register (215)
rig_register (226)
rig_register (217)
rig_register (233)
rig_register (220)
rig_register (223)
rig_register (227)
rig_register (234)
rig_register (231)
rig_register (231)
rig_register (228)
rig_register (219)
rig_register (232)
kenwood_init called
kenwood_init: if_len = 38
rig:rig_open called
kenwood_get_vfo_if called
kenwood_get_if called
kenwood_safe_transaction called
kenwood_transaction called
kenwood_transaction: cmdstr = IF
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string(): RX 17 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20
kenwood_transaction: Command is not correctly terminated 'I'
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string(): RX 16 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
kenwood_transaction: Command is not correctly terminated 'I'
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string(): RX 15 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 I.F00003574000
kenwood_transaction: Command is not correctly terminated 'I'
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string(): RX 14 characters
0000 49 46 30 30 30 30 33 35 37 00 34 30 30 30 IF0000357.4000
kenwood_transaction: Command is not correctly terminated 'IF0000357'
Opened rig model 228, 'TS-480'
Backend version: 0.8.5, Status: Untested
Rig command: _
kenwood_transaction called
kenwood_transaction: cmdstr = TY
write_block(): TX 3 bytes
0000 54 59 3b TY;
read_string(): RX 6 characters
0000 54 59 41 36 31 3b TYA61;
Info: TS-480SAT (100W + AT)
Rig command: f
kenwood_get_freq called
kenwood_get_freq: unsupported VFO 536870912
get_freq: error = Invalid parameter
Rig command: v
kenwood_get_vfo_if called
kenwood_get_if called
kenwood_safe_transaction called
kenwood_transaction called
kenwood_transaction: cmdstr = IF
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string(): RX 17 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20
kenwood_transaction: Command is not correctly terminated 'I'
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string(): RX 16 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
kenwood_transaction: Command is not correctly terminated 'I'
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string(): RX 15 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 I.F00003574000
kenwood_transaction: Command is not correctly terminated 'I'
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string(): RX 14 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 I.F00003574000
kenwood_transaction: Command is not correctly terminated 'I'
get_vfo: error = Protocol error
Rig command: F
Frequency: 14200
kenwood_set_freq called
kenwood_set_freq: unsupported VFO 536870912
set_freq: error = Invalid parameter
Now doing the same again with rigctl-wsjtx (3.2~git):
$ rigctl-wsjtx -m 228 -r /dev/ttyS0 -s 115200 -vvvvv
rigctl, Hamlib 3.2~git
Report bugs to <ham...@li...>
rig_init called
initrigs3_kenwood called
rig_register called
rig_register: rig_register (213)
rig_register called
rig_register: rig_register (201)
rig_register called
rig_register: rig_register (225)
rig_register called
rig_register: rig_register (203)
rig_register called
rig_register: rig_register (204)
rig_register called
rig_register: rig_register (216)
rig_register called
rig_register: rig_register (224)
rig_register called
rig_register: rig_register (205)
rig_register called
rig_register: rig_register (207)
rig_register called
rig_register: rig_register (209)
rig_register called
rig_register: rig_register (210)
rig_register called
rig_register: rig_register (222)
rig_register called
rig_register: rig_register (214)
rig_register called
rig_register: rig_register (230)
rig_register called
rig_register: rig_register (221)
rig_register called
rig_register: rig_register (229)
rig_register called
rig_register: rig_register (238)
rig_register called
rig_register: rig_register (202)
rig_register called
rig_register: rig_register (211)
rig_register called
rig_register: rig_register (206)
rig_register called
rig_register: rig_register (208)
rig_register called
rig_register: rig_register (215)
rig_register called
rig_register: rig_register (226)
rig_register called
rig_register: rig_register (217)
rig_register called
rig_register: rig_register (233)
rig_register called
rig_register: rig_register (220)
rig_register called
rig_register: rig_register (223)
rig_register called
rig_register: rig_register (227)
rig_register called
rig_register: rig_register (234)
rig_register called
rig_register: rig_register (231)
rig_register called
rig_register: rig_register (239)
rig_register called
rig_register: rig_register (237)
rig_register called
rig_register: rig_register (228)
rig_register called
rig_register: rig_register (219)
rig_register called
rig_register: rig_register (232)
rig_register called
rig_register: rig_register (236)
rig_register called
rig_register: rig_register (240)
kenwood_init called
kenwood_init: if_len = 37
rig_open called
port_open called
serial_open called
serial_setup called
rig_get_vfo called
kenwood_get_vfo_if called
kenwood_get_if called
kenwood_safe_transaction called
kenwood_transaction called
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 17 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 17 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 18 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20 3b ;
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 17 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 19 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20 30 3b 0;
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 17 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 17 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 18 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20 3b ;
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 17 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 17 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 19 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20 30 3b 0;
kenwood_transaction: Command is not correctly terminated 'I'
Opened rig model 228, 'TS-480'
rig_strstatus called
Backend version: 0.9.5, Status: Untested
Rig command: _
rig_get_info called
kenwood_transaction called
kenwood_transaction: cmdstr = TY
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 54 59 3b TY;
read_string called
read_string(): RX 6 characters
0000 54 59 41 36 31 3b TYA61;
Info: TS-480SAT (100W + AT)
Rig command: f
rig_get_freq called
kenwood_get_freq called
rig_get_vfo called
kenwood_get_vfo_if called
kenwood_get_if called
kenwood_safe_transaction called
kenwood_transaction called
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 17 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 18 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20 3b ;
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 17 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 17 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 17 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 17 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 17 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 18 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20 3b ;
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 17 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 18 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20 3b ;
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 17 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20
kenwood_transaction: Command is not correctly terminated 'I'
get_freq: error = Protocol error
Rig command: v
rig_get_vfo called
kenwood_get_vfo_if called
kenwood_get_if called
kenwood_safe_transaction called
kenwood_transaction called
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 17 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 17 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 17 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 17 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 17 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 17 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 19 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20 30 3b 0;
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 17 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 18 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20 3b ;
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 28 characters
0000 49 46 30 30 30 30 33 35 37 34 30 30 00 30 20 20 IF0000357400.0
0010 20 20 20 20 30 30 33 30 30 30 30 30 00300000
kenwood_transaction: Command is not correctly terminated 'IF0000357400'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 17 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20
kenwood_transaction: Command is not correctly terminated 'I'
get_vfo: error = Protocol error
Rig command: F
Frequency: 14200
rig_set_freq called
kenwood_set_freq called
rig_get_vfo called
kenwood_get_vfo_if called
kenwood_get_if called
kenwood_safe_transaction called
kenwood_transaction called
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 17 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 18 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20 3b ;
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 17 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 18 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20 3b ;
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 17 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 17 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 17 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 17 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 17 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 17 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_transaction: cmdstr = IF
serial_flush called
write_block called
write_block(): TX 3 bytes
0000 49 46 3b IF;
read_string called
read_string(): RX 19 characters
0000 49 00 46 30 30 30 30 33 35 37 34 30 30 30 20 20 I.F00003574000
0010 20 30 3b 0;
kenwood_transaction: Command is not correctly terminated 'I'
set_freq: error = Protocol error
... so what I see is, that rigctl seems to get not full answers back.
The question that remains is why? I googled the key phrases
kenwood_transaction: Command is not correctly terminated 'I'
kenwood_get_freq: unsupported VFO 536870912
... but I did not come up with anything that seemed to help.
Any suggestions as how to proceed are most welcome.
Thanks a lot folks!
73
Stefan.
--
Stefan U. Hegner <do...@we...>
* * *
DO2HG --- German Ham Radio Station
D-32584 Löhne ----- Locator JO42IE
* * *
GPG-Key | 64DD 13F0 7A1C 1F95 D6DF
F-Print | 6114 CC1F EBF3 BF67 8A26
|
