Re: [Hamlib-developer] Problem with IC-9100

[Marc H. - V. <vk...@wi...>]

Thanks for all your help Bill - I'm beginning to suspect it's a Gpredict
problem.

When in Sat mode, turning the VFO knob changes both uplink and down link.

It would appear though that when Main is changed by CI-V, Sub does not
follow. I guess this makes sense.

Unless, you have another theory, I think I need to approach Gpredict.

-----Original Message-----
From: Bill Somerville [mailto:g4...@cl...] 
Sent: Saturday, 16 January 2016 23:57
To: ham...@li...
Subject: Re: [Hamlib-developer] Problem with IC-9100

On 16/01/2016 12:49, Marc Hillman - VK3OHM wrote:
> In Gpredict, I have set the Rig Type to Duplex TRX. Other choices are 
> RX only, TX only, Simplex TRX & FT817. None of these others can be 
> right, so Duplex TRX it is. Now "Duplex TRX" could mean two things on an
IC-9100.
> Gpredict allows me to specify Main as uplink or downlink, and Sub as 
> up/down.
In SAT mode the Tx/Rx tracking are done by the rig so I would have though
that Rx only makes sense. Gpredict only needs to send CAT commands to change
the Rx VFO and the Tx tracks, either with or against depending on
transponder mode. Trying to change both via CAT has to be done once at set
up. Is Gpredict trying to do the set up part, the tracking part or both?

73
Bill
G4WJS.

----------------------------------------------------------------------------
--
Site24x7 APM Insight: Get Deep Visibility into Application Performance APM +
Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor
end-to-end web transactions and take corrective actions now Troubleshoot
faster and improve end-user experience. Signup Now!
http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140
_______________________________________________
Hamlib-developer mailing list
Ham...@li...
https://lists.sourceforge.net/lists/listinfo/hamlib-developer

-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2016.0.7294 / Virus Database: 4489/11410 - Release Date: 01/15/16