Re: [Hamlib-developer] Problem with IC-9100
Library to control radio transceivers and receivers
Brought to you by:
n0nb
From: Bill S. <g4...@cl...> - 2016-01-16 12:57:25
|
On 16/01/2016 12:49, Marc Hillman - VK3OHM wrote: > In Gpredict, I have set the Rig Type to Duplex TRX. Other choices are RX > only, TX only, Simplex TRX & FT817. None of these others can be right, so > Duplex TRX it is. Now "Duplex TRX" could mean two things on an IC-9100. > Gpredict allows me to specify Main as uplink or downlink, and Sub as > up/down. In SAT mode the Tx/Rx tracking are done by the rig so I would have though that Rx only makes sense. Gpredict only needs to send CAT commands to change the Rx VFO and the Tx tracks, either with or against depending on transponder mode. Trying to change both via CAT has to be done once at set up. Is Gpredict trying to do the set up part, the tracking part or both? 73 Bill G4WJS. |