[Hamlib-developer] Problem with IC-9100

[Marc H. - V. <vk...@wi...>]

Hamlib rigctld 3.0.1

Rig model 368, 'IC-9100'   Backend version 0.7   Status: Untested

 

I am using Gpredict and stated version of hamlib to control an IC-9100.
Below is the Windows 10 DOS command I use to start rigctld, and the
resulting diagnostics.

 

The Main VFO is being updated, but the Sub is not. IC-9100 is in Satellite
mode, VFO. Any clues?

 

Also, despite configuring itu_region=3, its reported value is 2. Why does
itu_region even matter?

 

----------------------------------------------------------------------------
------------------------------------------------------------------------
start "rigctld" rigctld -L -m 368 -r COM5 -s 9600 -c 0x7c -T 127.0.0.1 -t
4532 -C no_xchg=1,itu_region=3 -vvvvv :: IC-9100

 

rigctld, Hamlib 3.0.1

Report bugs to <ham...@li...>

 

rig:rig_init called

icom: _init called

rig_register (355)

rig_register (309)

rig_register (310)

rig_register (311)

rig_register (313)

rig_register (314)

rig_register (315)

rig_register (319)

rig_register (320)

rig_register (321)

rig_register (322)

rig_register (367)

rig_register (323)

rig_register (346)

rig_register (324)

rig_register (328)

rig_register (330)

rig_register (326)

rig_register (327)

rig_register (347)

rig_register (357)

rig_register (363)

rig_register (329)

rig_register (362)

rig_register (345)

rig_register (356)

rig_register (360)

rig_register (370)

rig_register (361)

rig_register (331)

rig_register (312)

rig_register (316)

rig_register (332)

rig_register (334)

rig_register (344)

rig_register (368)

rig_register (335)

rig_register (369)

rig_register (336)

rig_register (358)

rig_register (337)

rig_register (338)

rig_register (339)

rig_register (340)

rig_register (341)

rig_register (342)

rig_register (343)

rig_register (366)

rig_register (303)

rig_register (304)

rig_register (306)

rig_register (307)

rig_register (302)

rig_register (352)

rig_register (353)

rig_register (351)

rig_register (364)

rig_register (365)

rig_register (354)

rig_register (371)

rig_set_conf: no_xchg='1'

rig_set_conf: itu_region='3'

rig_set_conf: civaddr='0x7c'

rig_pathname: "Path name to the device file of the rig"

        Default: /dev/rig, Value: COM5

        String.

write_delay: "Delay in ms between each byte sent out"

        Default: 0, Value: 0

        Range: 0.0..1000.0, step 1.0

post_write_delay: "Delay in ms between each command sent out"

        Default: 0, Value: 0

        Range: 0.0..1000.0, step 1.0

timeout: "Timeout in ms"

        Default: 0, Value: 1000

        Range: 0.0..10000.0, step 1.0

retry: "Max number of retry"

        Default: 0, Value: 3

        Range: 0.0..10.0, step 1.0

itu_region: "ITU region this rig has been manufactured for (freq. band
plan)"

        Default: 0, Value: 2

        Range: 1.0..3.0, step 1.0

vfo_comp: "VFO compensation in ppm"

        Default: 0, Value: 0.000000

        Range: 0.0..1000.0, step 0.0

poll_interval: "Polling interval in millisecond for transceive emulation"

        Default: 500, Value: 500

        Range: 0.0..1000000.0, step 1.0

ptt_type: "Push-To-Talk interface type override"

        Default: RIG, Value:

        Combo: RIG, DTR, RTS, Parallel, CM108, None

ptt_pathname: "Path name to the device file of the Push-To-Talk"

        Default: /dev/rig, Value:

        String.

ptt_bitnum: "Push-To-Talk GPIO bit number"

        Default: 2, Value:

        Range: 0.0..7.0, step 1.0

dcd_type: "Data Carrier Detect (or squelch) interface type override"

        Default: RIG, Value:

        Combo: RIG, DSR, CTS, CD, Parallel, CM108, None

dcd_pathname: "Path name to the device file of the Data Carrier Detect (or
squelch)"

        Default: /dev/rig, Value:

        String.

serial_speed: "Serial port baud rate"

        Default: 0, Value: 9600

        Range: 300.0..115200.0, step 1.0

data_bits: "Serial port data bits"

        Default: 8, Value: 8

        Range: 5.0..8.0, step 1.0

stop_bits: "Serial port stop bits"

        Default: 1, Value: 1

        Range: 0.0..3.0, step 1.0

serial_parity: "Serial port parity"

        Default: None, Value: None

        Combo: None, Odd, Even, Mark, Space

serial_handshake: "Serial port handshake"

        Default: None, Value: None

        Combo: None, XONXOFF, Hardware

rts_state: "Serial port set state of RTS signal for external powering"

        Default: Unset, Value: Unset

        Combo: Unset, ON, OFF

dtr_state: "Serial port set state of DTR signal for external powering"

        Default: Unset, Value: Unset

        Combo: Unset, ON, OFF

civaddr: "Transceiver's CI-V address"

        Default: 0, Value: 124

        Range: 0.0..255.0, step 1.0

mode731: "CI-V operating frequency data length, needed for IC731 and IC735"

        Default: 0, Value: 0

        Check button.

no_xchg: "Don't Use VFO XCHG to set other VFO mode and Frequency"

        Default: 0, Value: 1

        Check button.

rig:rig_open called

Opened rig model 368, 'IC-9100'

Backend version: 0.7, Status: Untested

----------------------------------------------------------------------------
------------------------------------------------------------------------

___________________________________________________

Marc Hillman

VK3OHM