Re: [Hamlib-developer] ICOM Marine Radios M710 802M

[Ken N. <ke...@di...>]

>rigctl -m 3002 -r com4 -s 4800

Rig command: -G TUNE
Rig command: Mem/VFO Op: vfo_op: error = Communication timed out	/*Radio did tune*/

Rig command: -G TUNE
Rig command: Mem/VFO Op:

Rig command: -\get_dcd
Rig command: DCD: 1													/*Squelch Off response*/

Rig command: -\get_dcd
Rig command: DCD: 0													/*Squelch On response*/

Rig command: -f
Rig command: Frequency: 7145000

Rig command: F14000000
Frequency:															/*Both TX and RX was at 14000000

Rig command: -f
Rig command: Frequency: 14000000

Rig command: -m
Rig command: Mode: USB
Passband: 2300

Rig command: MLSB
Mode: Passband: 2300

Rig command: m
Mode: LSB
Passband: 2300

Rig command: M
Mode: USB
Passband: 2300

Rig command: MCW
Mode: Passband: 500												/*changing the Bandwidth here seems to have no effect*/

Rig command: m
Mode: CW
Passband: 2300

Rig command: M
Mode: AM
Passband: 2300

Rig command: F567000
Frequency:

Rig command: -m
Rig command: Mode: AM
Passband: 14000														/*Is This correct?*/

Rig command: t
PTT: 0

Rig command: T
PTT: 1																/*Started Transmitting*/

Rig command: t
PTT: 1

Rig command: T0
PTT:																/*Stopped Transmitting*/
Rig command: t
PTT: 0

Rig command: s
Split: 0
TX VFO: currVFO

Rig command: S
Split: 1
TX VFO: 14100000													/*I suspect I do not know how to use this command*/
set_split_vfo: error = Invalid parameter

Rig command: s
Split: 0
TX VFO: currVFO

Rig command: -i

Rig command: TX Frequency: 14000000

Rig command: I
TX Frequency: 14000100

Rig command: i
TX Frequency: 14000100

Rig command: S
Split: 0
TX VFO: currVFO														/*Did not stop split. I suspect I do not know how to use this command*/

Rig command: S
Split: 0
TX VFO: VFO															/*Did not stop split. I suspect I do not know how to use this command*/

Rig command: s
Split: 0
TX VFO: currVFO

Rig command: F7145000												/*TXF=RXF*/
Frequency:

Rig command: I
TX Frequency: 7140000												/*TXF<>RXF*/

Rig command: F567000												/*Cape Talk Local AM Radio Station*/
Frequency:
Rig command: MAM
Mode: Passband: 3000

Rig command: lRAWSTR
Level: Level Value: 3												/*RFGain Max Local Strong Radio*/

Rig command: lRAWSTR
Level: Level Value: 8												/RFGain Min Local Strong Radio*/

Rig command: lRAWSTR
Level: Level Value: 0												/*Max RF Gain NoSignal 29.9999Mhz*/