From: Larry K. <lki...@sc...> - 2008-03-26 14:05:08
|
I cannot duplicate your problems on my FT-1000mp using Mandriva 2008.0 or Slackware 12.0 with the latest Hamlib. I don't have Ubuntu here. FLdigi and GRig both work as advertised. 73's Larry W4LK Chris wrote: > O.k. I'm having issues with CAT for an FT-1000MP (plain MP, not a variant) > > Distro: Ubuntu 7.10 x86 > Hamlib: both the distro package and also manually compiled 1.2.7 and the CVS > Grig: both the packaged version and a manually compiled 0.7.99 > > Also having issues using CAT via fldigi the last two versions, > manually compiled, both linked to 1.2.7 and CVS hamlib. > > Issue: When CAT is initializing it TX's the rig, several times, > sometimes locking in TX for almost a full minute. Once grig or > another app comes up after init, the frequency information isn't > correct at all and changing either the VFO directly or in the > software, doesn't sync with the software or rig respectively. > > Some error msgs from debug level 4 from grig > > 2008/03/25 19:28:03;;HAMLIB;;4;;ft1000mp: ft1000mp_get_freq called > 2008/03/25 19:28:03;;HAMLIB;;4;;ft1000mp: ft1000mp_get_update_data called > 2008/03/25 19:28:03;;HAMLIB;;4;;ft1000mp: ft1000mp_send_priv_cmd called > 2008/03/25 19:28:05;;HAMLIB;;3;;read_block: timedout after 0 chars > 2008/03/25 19:28:05;;GRIG;;2;;rig_daemon_exec_cmd: Failed to execute > RIG_CMD_GET_FREQ_1: > 2008/03/25 19:28:05;;GRIG;;2;;Communication timed out > 2008/03/25 19:28:05;;HAMLIB;;4;;ft1000mp: ft1000mp_get_mode called > 2008/03/25 19:28:05;;HAMLIB;;4;;ft1000mp: ft1000mp_get_update_data called > 2008/03/25 19:28:05;;HAMLIB;;4;;ft1000mp: ft1000mp_send_priv_cmd called > 2008/03/25 19:28:08;;HAMLIB;;3;;read_block: timedout after 0 chars > 2008/03/25 19:28:08;;GRIG;;2;;rig_daemon_exec_cmd: Failed to execute > RIG_CMD_GET_MODE: > 2008/03/25 19:28:08;;GRIG;;2;;Communication timed out > 2008/03/25 19:28:08;;HAMLIB;;2;;Unsupported get_level 1073741824 > 2008/03/25 19:28:08;;GRIG;;2;;rig_daemon_exec_cmd: Failed to execute > RIG_CMD_GET_STRENGTH: > 2008/03/25 19:28:08;;GRIG;;2;;Invalid parameter > 2008/03/25 19:28:08;;HAMLIB;;4;;ft1000mp: ft1000mp_get_freq called > 2008/03/25 19:28:08;;HAMLIB;;4;;ft1000mp: ft1000mp_get_update_data called > 2008/03/25 19:28:08;;HAMLIB;;4;;ft1000mp: ft1000mp_send_priv_cmd called > 2008/03/25 19:28:10;;HAMLIB;;3;;read_block: timedout after 0 chars > 2008/03/25 19:28:10;;GRIG;;2;;rig_daemon_exec_cmd: Failed to execute > RIG_CMD_GET_FREQ_1: > > > The grig commandline used to invoke it > > grig -m 124 -r /dev/ttyS0 -s 4800 -d 4 > > Physical connection is just a modem cable from ttyS0 to the rig, > serial, no USB adapters. > > > Things tried... > > all the FT1000MP variants for models > > -D settings up to 100ms...didn't help at all > > Any help is appreciated and I can supply more debugging output on > request with no issue. > > I hope this isn't an FAQ, I didn't see any mailing list archives links > before I signed up. > > ------------------------------------------------------------------------- > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace > _______________________________________________ > Hamlib-developer mailing list > Ham...@li... > https://lists.sourceforge.net/lists/listinfo/hamlib-developer > > |