On Sat, 27 Jul 2002 13:17:00 -0300
"pol...@so..." <pol...@so...> wrote:
> Hi there!
> when I use the "rigctl" I use this line command
>
> rigctl -vvvv -r /dev/ttyS0 -m 105 -s 4800
>
> to control the FT-747GX. There is no response on the tranceiver when I try any command, the only thing I see is the "CAT" signal displaying on the rig, but nothing more. Any information is sent to the rig but...??
> The cable is good (tested in Window$).
>
Hello alejandro.
My guess is that your baud-rate is wrong. By default, hamlib will
use the maximum baudrate for your rig. So, first try without '-s'.
IF that does not work, consult the manual of your rig, or the
rig's menu to find the baud rate.
> 73!s
>
> --
> ---_-_---_-___---_---_-_--- = CQ
> KDE SUCKS!!!
> -------------------------
> Alejandro Weber LU7MGP
> pol...@so...
> po...@li...
> lu...@qs...
> Linux user number 242893
> -------------------------
> KDE SUCKS!!!
>
>
Joop, PA4TU
|
