Hi, I am new to using HamLib.
I am trying to set up Hamlib on my Icom ID-5100, I have put these settings in the Desktop shortcut for the rigctld file
-c140 -m 3071-s 9600 -r COM6 -vvv
However all I am getting is this:
icom_transaction: retry=0: serial_setup: Handshake=None
serial_setup: tcsetattr TCSANOW
2:rig.c(7975):async_data_handler_start entered
async_data_handler_start: async data support disabled since async_data_enabled=0
2:rig.c(7982):async_data_handler_start returning(0)
rig_open: 000000000258744C rs->comm_state==1?=1
2:icom.c(994):icom_rig_open entered
icom_rig_open: ID-5100 v20231209.9
3:icom.c(779):icom_get_usb_echo_off entered
4:frame.c(456):icom_transaction entered
icom_transaction: cmd=0x03, subcmd=0xffffffff, payload_len=0
5:frame.c(143):icom_one_transaction entered
write_block(): TX 6 bytes
read_string_generic called, rxmax=200 direct=1, expected_len=1
read_string_generic(1362): retrying read timeout 1/1 timeout=1000
read_string_generic(): Timed out 2.047 seconds after 0 chars, direct=1
5:frame.c(325):icom_one_transaction returning(-5) Communication timed out
Communication timed out
Communication timed out
icom_transaction: retry=0: Communication timed out
Double-check your baud rate on the rig Menu/Function/CI-V/CI-V Baud Rate -- set it for 19200 (may as well). Auto baud does not work.Double-check your CI-V Address = 8C
If it still fails please use 5 v's to show more debug and ALL the output please.
Mike W9MDB
Hi, I am new to using HamLib.
I am trying to set up Hamlib on my Icom ID-5100, I have put these settings in the Desktop shortcut for the rigctld file
-c140 -m 3071-s 9600 -r COM6 -vvv
However all I am getting is this:
icom_transaction: retry=0: serial_setup: Handshake=None
serial_setup: tcsetattr TCSANOW
2:rig.c(7975):async_data_handler_start entered
async_data_handler_start: async data support disabled since async_data_enabled=0
2:rig.c(7982):async_data_handler_start returning(0)
rig_open: 000000000258744C rs->comm_state==1?=1
2:icom.c(994):icom_rig_open entered
icom_rig_open: ID-5100 v20231209.9
3:icom.c(779):icom_get_usb_echo_off entered
4:frame.c(456):icom_transaction entered
icom_transaction: cmd=0x03, subcmd=0xffffffff, payload_len=0
5:frame.c(143):icom_one_transaction entered
write_block(): TX 6 bytes
read_string_generic called, rxmax=200 direct=1, expected_len=1
read_string_generic(1362): retrying read timeout 1/1 timeout=1000
read_string_generic(): Timed out 2.047 seconds after 0 chars, direct=1
5:frame.c(325):icom_one_transaction returning(-5) Communication timed out
Communication timed out
Communication timed out
icom_transaction: retry=0: Communication timed out
4:frame.c(487):icom_transaction returning(-5) Communication timed out
3:icom.c(787):icom_get_usb_echo_off returning(-5) Communication timed out
icom_rig_open: echo status result=-5
icom_rig_open: echo status unknown
3:icom.c(779):icom_get_usb_echo_off entered
4:frame.c(456):icom_transaction entered
icom_transaction: cmd=0x03, subcmd=0xffffffff, payload_len=0
5:frame.c(143):icom_one_transaction entered
write_block(): TX 6 bytes
read_string_generic called, rxmax=200 direct=1, expected_len=1
read_string_generic(1362): retrying read timeout 1/1 timeout=1000
read_string_generic(): Timed out 2.055 seconds after 0 chars, direct=1
5:frame.c(325):icom_one_transaction returning(-5) Communication timed out
Communication timed out
Communication timed out
Could someone please help me to get this working correctly
You don't need the "-c" switch.
You have the most recent firmware?
M 1.22S 1.01C 1.21DSP 1.14GPS 2.00
What kind of serial cable? If an older serial cable may need RTS or DTR set high.
--set-conf=rts_state=1--set-conf=dtr_state=1
One of these may be needed.
Mike W9MDB
The ID5100 does not have a DB9 connector. How are you hooking into the CI-V jack?
CI-V is not 12V RS232.
You probably need a new CI-V cable like this: https://www.dxengineering.com/parts/rtp-usb-29a
Like this:https://www.ebay.co.uk/itm/313618964594?hash=item490525a072:g:Xr8AAOSwY45URpUZ&amdata=enc%3AAQAIAAAA4DeC4indonYxVgxnPEQHBraI2Nb2xTmGnX4gVlHiP5zUTpF7qSrz6V5KbHZV8tXfBUl4MLtRgRt7Y%2BOt63ySBPk2vjUwdPLo0t24aprLEiydVAY7d2S1S%2BwIJg8kg8s85lci3UfCiYVzDK57J%2BRJvYaMm7EMwz%2BfiF9GpMSd73Frt6r00QLnWenPg8kOy0%2FjxwGbtnr1%2FYIg4aYdv%2BcmtPFmYVVKXrEy5P%2Fz1Uw1jHrul%2BSGiYOmZF9ZSkmzyXmhz20xDnEKuhPLecTWMk5GB5s2uciQQZg7Uqpb2xumE9L8%7Ctkp%3ABk9SR8zcvr-ZYw
Hi, I am new to using HamLib.
I am trying to set up Hamlib on my Icom ID-5100, I have put these settings in the Desktop shortcut for the rigctld file
-c140 -m 3071-s 9600 -r COM6 -vvv
However all I am getting is this:
icom_transaction: retry=0: serial_setup: Handshake=None
serial_setup: tcsetattr TCSANOW
2:rig.c(7975):async_data_handler_start entered
async_data_handler_start: async data support disabled since async_data_enabled=0
2:rig.c(7982):async_data_handler_start returning(0)
rig_open: 000000000258744C rs->comm_state==1?=1
2:icom.c(994):icom_rig_open entered
icom_rig_open: ID-5100 v20231209.9
3:icom.c(779):icom_get_usb_echo_off entered
4:frame.c(456):icom_transaction entered
icom_transaction: cmd=0x03, subcmd=0xffffffff, payload_len=0
5:frame.c(143):icom_one_transaction entered
write_block(): TX 6 bytes
read_string_generic called, rxmax=200 direct=1, expected_len=1
read_string_generic(1362): retrying read timeout 1/1 timeout=1000
read_string_generic(): Timed out 2.047 seconds after 0 chars, direct=1
5:frame.c(325):icom_one_transaction returning(-5) Communication timed out
Communication timed out
Communication timed out
icom_transaction: retry=0: Communication timed out
3:icom.c(787):icom_get_usb_echo_off returning(-5) Communication timed out
icom_rig_open: echo status result=-5
icom_rig_open: echo status unknown
3:icom.c(779):icom_get_usb_echo_off entered
4:frame.c(456):icom_transaction entered
icom_transaction: cmd=0x03, subcmd=0xffffffff, payload_len=0
5:frame.c(143):icom_one_transaction entered
write_block(): TX 6 bytes
read_string_generic called, rxmax=200 direct=1, expected_len=1
read_string_generic(1362): retrying read timeout 1/1 timeout=1000
read_string_generic(): Timed out 2.055 seconds after 0 chars, direct=1
5:frame.c(325):icom_one_transaction returning(-5) Communication timed out
Communication timed out
Communication timed out
Could someone please help me to get this working correctly
Thank you
Ian, M0JTL
Try the latest hamlib here:
https://n0nb.users.sourceforge.net/
Double-check your baud rate on the rig Menu/Function/CI-V/CI-V Baud Rate -- set it for 19200 (may as well). Auto baud does not work.Double-check your CI-V Address = 8C
If it still fails please use 5 v's to show more debug and ALL the output please.
Mike W9MDB
Hi, I am new to using HamLib.
I am trying to set up Hamlib on my Icom ID-5100, I have put these settings in the Desktop shortcut for the rigctld file
-c140 -m 3071-s 9600 -r COM6 -vvv
However all I am getting is this:
icom_transaction: retry=0: serial_setup: Handshake=None
serial_setup: tcsetattr TCSANOW
2:rig.c(7975):async_data_handler_start entered
async_data_handler_start: async data support disabled since async_data_enabled=0
2:rig.c(7982):async_data_handler_start returning(0)
rig_open: 000000000258744C rs->comm_state==1?=1
2:icom.c(994):icom_rig_open entered
icom_rig_open: ID-5100 v20231209.9
3:icom.c(779):icom_get_usb_echo_off entered
4:frame.c(456):icom_transaction entered
icom_transaction: cmd=0x03, subcmd=0xffffffff, payload_len=0
5:frame.c(143):icom_one_transaction entered
write_block(): TX 6 bytes
read_string_generic called, rxmax=200 direct=1, expected_len=1
read_string_generic(1362): retrying read timeout 1/1 timeout=1000
read_string_generic(): Timed out 2.047 seconds after 0 chars, direct=1
5:frame.c(325):icom_one_transaction returning(-5) Communication timed out
Communication timed out
Communication timed out
icom_transaction: retry=0: Communication timed out
4:frame.c(487):icom_transaction returning(-5) Communication timed out
3:icom.c(787):icom_get_usb_echo_off returning(-5) Communication timed out
icom_rig_open: echo status result=-5
icom_rig_open: echo status unknown
3:icom.c(779):icom_get_usb_echo_off entered
4:frame.c(456):icom_transaction entered
icom_transaction: cmd=0x03, subcmd=0xffffffff, payload_len=0
5:frame.c(143):icom_one_transaction entered
write_block(): TX 6 bytes
read_string_generic called, rxmax=200 direct=1, expected_len=1
read_string_generic(1362): retrying read timeout 1/1 timeout=1000
read_string_generic(): Timed out 2.055 seconds after 0 chars, direct=1
5:frame.c(325):icom_one_transaction returning(-5) Communication timed out
Communication timed out
Communication timed out
Could someone please help me to get this working correctly
Thank you
Ian, M0JTL
Icom ID-5100 Hamlib Settings
Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/hamlib/discussion/25919/
To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/
Hi Mike, Thank you for your reply.
I have changed the setting on the radio and in the rigctld file, but still get the following error:
rigctld.c(639) Startup: C:\Program Files\hamlib-w64-4.6~git\bin\rigctld.exe -c 140 -m 3071-s -r COM6 -vvvvv 19200
rigctld Hamlib 4.6~git 2023-12-30T14:18:44Z SHA=987738 64-bit
Report bugs to hamlib-developer@lists.sourceforge.net
Max# of rigctld client services=32
rig_check_rig_caps: p1=0000000063D123C0, p2=0000000063D18940, rig_model=0000000063D123C0, macro_name=0000000063D18940
initrigs4_icom: _init called
rig_init: rig_model=Icom ID-5100 20231209.9
rig_init: rig has VFO_A
rig_init: rig has VFO_B
rig_init: rig has VFO_SUB
rig_init: rig has VFO_MAIN
2:icom.c(627):icom_init entered
icom_init: done
2:icom.c(731):icom_init returning(0)
main: twiddle=0, uplink=0, twiddle_rit=0
rig_token_lookup called for civaddr
rig_confparam_lookup called for civaddr
rig_set_conf called
rig_confparam_lookup called for 1
rig_set_conf: civaddr='140'
2:icom.c(5109):icom_set_conf entered
2:icom.c(5139):icom_set_conf returning(0)
rig.c(897):rig_open entered
rig_settings_get_path: path=\Users\M0JTL/.hamlib_settings
rig_settings_load_all: settings_file (\Users\M0JTL/.hamlib_settings): No such file or directory
rig_open: cwd=C:\Program Files\hamlib-w64-4.6~git\bin
rig_open: C:\Program Files\hamlib-w64-4.6~git\bin/hamlib_settings does not exist
rig_open: async_data_enable=0, async_data_supported=0
serial_open: COM6
serial_setup: tcgetattr
serial_setup: cfsetispeed=19200,0x000e
serial_setup: cfsetospeed=19200,0x000e
serial_setup: data_bits=8
serial_setup: parity=0
serial_setup: Handshake=None
serial_setup: tcsetattr TCSANOW
2:rig.c(7975):async_data_handler_start entered
async_data_handler_start: async data support disabled since async_data_enabled=0
2:rig.c(7982):async_data_handler_start returning(0)
rig_open: 000000000064744C rs->comm_state==1?=1
2:icom.c(994):icom_rig_open entered
icom_rig_open: ID-5100 v20231209.9
3:icom.c(779):icom_get_usb_echo_off entered
4:frame.c(456):icom_transaction entered
icom_transaction: cmd=0x03, subcmd=0xffffffff, payload_len=0
5:frame.c(143):icom_one_transaction entered
write_block(): TX 6 bytes
0000 fe fe 8c e0 03 fd ......
5:frame.c(325):icom_one_transaction returning(-5) Communication timed out
icom_transaction: retry=0: serial_setup: tcsetattr TCSANOW
2:rig.c(7975):async_data_handler_start entered
async_data_handler_start: async data support disabled since async_data_enabled=0
2:rig.c(7982):async_data_handler_start returning(0)
rig_open: 000000000064744C rs->comm_state==1?=1
2:icom.c(994):icom_rig_open entered
icom_rig_open: ID-5100 v20231209.9
3:icom.c(779):icom_get_usb_echo_off entered
4:frame.c(456):icom_transaction entered
icom_transaction: cmd=0x03, subcmd=0xffffffff, payload_len=0
5:frame.c(143):icom_one_transaction entered
write_block(): TX 6 bytes
0000 fe fe 8c e0 03 fd ......
read_string_generic called, rxmax=200 direct=1, expected_len=1
read_string_generic(1362): retrying read timeout 1/1 timeout=1000
read_string_generic(): Timed out 2.073 seconds after 0 chars, direct=1
5:frame.c(325):icom_one_transaction returning(-5) Communication timed out
Communication timed out
Communication timed out
icom_transaction: failed: async_data_handler_start: async data support disabled since async_data_enabled=0
2:rig.c(7982):async_data_handler_start returning(0)
rig_open: 000000000064744C rs->comm_state==1?=1
2:icom.c(994):icom_rig_open entered
icom_rig_open: ID-5100 v20231209.9
3:icom.c(779):icom_get_usb_echo_off entered
4:frame.c(456):icom_transaction entered
icom_transaction: cmd=0x03, subcmd=0xffffffff, payload_len=0
5:frame.c(143):icom_one_transaction entered
write_block(): TX 6 bytes
0000 fe fe 8c e0 03 fd ......
read_string_generic called, rxmax=200 direct=1, expected_len=1
read_string_generic(1362): retrying read timeout 1/1 timeout=1000
read_string_generic(): Timed out 2.073 seconds after 0 chars, direct=1
5:frame.c(325):icom_one_transaction returning(-5) Communication timed out
Communication timed out
Communication timed out
Communication timed out
3:icom.c(787):icom_get_usb_echo_off returning(-5) Communication timed out
icom_rig_open: echo status result=-5
icom_rig_open: echo status unknown
3:icom.c(779):icom_get_usb_echo_off entered
4:frame.c(456):icom_transaction entered
icom_transaction: cmd=0x03, subcmd=0xffffffff, payload_len=0
5:frame.c(143):icom_one_transaction entered
write_block(): TX 6 bytes
0000 fe fe 8c e0 03 fd ......
5:frame.c(325):icom_one_transaction returning(-5) Communication timed out
icom_transaction: retry=0:
4:frame.c(487):icom_transaction returning(-5) Communication timed out
3:icom.c(787):icom_get_usb_echo_off returning(-5) Communication timed out
icom_rig_open: echo status result=-5
icom_rig_open: echo status unknown
3:icom.c(779):icom_get_usb_echo_off entered
4:frame.c(456):icom_transaction entered
icom_transaction: cmd=0x03, subcmd=0xffffffff, payload_len=0
5:frame.c(143):icom_one_transaction entered
write_block(): TX 6 bytes
0000 fe fe 8c e0 03 fd ......
read_string_generic called, rxmax=200 direct=1, expected_len=1
read_string_generic(1362): retrying read timeout 1/1 timeout=1000
read_string_generic(): Timed out 2.064 seconds after 0 chars, direct=1
5:frame.c(325):icom_one_transaction returning(-5) Communication timed out
Communication timed out
Communication timed out
icom_transaction: failed:
3:icom.c(787):icom_get_usb_echo_off returning(-5) Communication timed out
icom_rig_open: echo status result=-5
icom_rig_open: echo status unknown
3:icom.c(779):icom_get_usb_echo_off entered
4:frame.c(456):icom_transaction entered
icom_transaction: cmd=0x03, subcmd=0xffffffff, payload_len=0
5:frame.c(143):icom_one_transaction entered
write_block(): TX 6 bytes
0000 fe fe 8c e0 03 fd ......
read_string_generic called, rxmax=200 direct=1, expected_len=1
read_string_generic(1362): retrying read timeout 1/1 timeout=1000
read_string_generic(): Timed out 2.064 seconds after 0 chars, direct=1
5:frame.c(325):icom_one_transaction returning(-5) Communication timed out
Communication timed out
Communication timed out
Communication timed out
3:icom.c(787):icom_get_usb_echo_off returning(-5) Communication timed out
icom_rig_open: echo status result=-5
icom_rig_open: echo status unknown
2:icom.c(1145):icom_rig_open returning(0)
rig_open: vfo_curr=currVFO, tx_vfo=TX
rig_open: default vfo = currVFO
2:rig.c(8019):morse_data_handler_start entered
morse_data_handler_start(8038): keyspd=25
2:rig.c(8049):morse_data_handler_start returning(0)
morse_data_handler: Starting morse data handler thread
2:rig.c(2258):rig_get_freq entered
rig_get_freq called vfo=VFOA
rig_get_freq(2277) called vfo=VFOA
vfo_fixup:(from rig_get_freq:2283) vfo=VFOA, vfo_curr=currVFO, split=0
rig.c(2286) vfo=VFOA, curr_vfo=currVFO
rig_get_freq: cache miss age=1000000ms, cached_vfo=VFOA, asked_vfo=VFOA, use_cached_freq=0
rig_get_freq(2393): vfo_opt=0, model=3071
rig.c(2440) trace
3:id5100.c(83):id5100_set_vfo entered
4:frame.c(456):icom_transaction entered
icom_transaction: cmd=0x07, subcmd=0xd0, payload_len=0
5:frame.c(143):icom_one_transaction entered
write_block(): TX 7 bytes
0000 fe fe 8c e0 07 d0 fd .......
5:frame.c(325):icom_one_transaction returning(-5) Communication timed out
icom_transaction: retry=0: rig_get_cache(275): vfo=VFOA, current_vfo=currVFO
rig_get_cache(470): vfo=VFOA, freq=0, mode=, width=0
rig_get_freq(2357): freqMainA=0, modeMainA=, widthMainA=0
rig_get_freq(2357): freqMainB=0, modeMainB=, widthMainB=0
rig_get_freq: cache miss age=1000000ms, cached_vfo=VFOA, asked_vfo=VFOA, use_cached_freq=0
rig_get_freq(2393): vfo_opt=0, model=3071
rig.c(2440) trace
3:id5100.c(83):id5100_set_vfo entered
4:frame.c(456):icom_transaction entered
icom_transaction: cmd=0x07, subcmd=0xd0, payload_len=0
5:frame.c(143):icom_one_transaction entered
write_block(): TX 7 bytes
0000 fe fe 8c e0 07 d0 fd .......
read_string_generic called, rxmax=200 direct=1, expected_len=1
read_string_generic(1362): retrying read timeout 1/1 timeout=1000
read_string_generic(): Timed out 2.099 seconds after 0 chars, direct=1
5:frame.c(325):icom_one_transaction returning(-5) Communication timed out
Communication timed out
Communication timed out
icom_transaction: failed: rig_get_freq(2357): freqMainA=0, modeMainA=, widthMainA=0
rig_get_freq(2357): freqMainB=0, modeMainB=, widthMainB=0
rig_get_freq: cache miss age=1000000ms, cached_vfo=VFOA, asked_vfo=VFOA, use_cached_freq=0
rig_get_freq(2393): vfo_opt=0, model=3071
rig.c(2440) trace
3:id5100.c(83):id5100_set_vfo entered
4:frame.c(456):icom_transaction entered
icom_transaction: cmd=0x07, subcmd=0xd0, payload_len=0
5:frame.c(143):icom_one_transaction entered
write_block(): TX 7 bytes
0000 fe fe 8c e0 07 d0 fd .......
read_string_generic called, rxmax=200 direct=1, expected_len=1
read_string_generic(1362): retrying read timeout 1/1 timeout=1000
read_string_generic(): Timed out 2.099 seconds after 0 chars, direct=1
5:frame.c(325):icom_one_transaction returning(-5) Communication timed out
Communication timed out
Communication timed out
Communication timed out
id5100.c(142):id5100_set_vfo returning2(-5) Communication timed out
id5100_get_freq2(198): vfo=VFOA
4:frame.c(456):icom_transaction entered
icom_transaction: cmd=0x03, subcmd=0xffffffff, payload_len=0
5:frame.c(143):icom_one_transaction entered
write_block(): TX 6 bytes
0000 fe fe 8c e0 03 fd ......
5:frame.c(325):icom_one_transaction returning(-5) Communication timed out
icom_transaction: retry=0:
Communication timed out
id5100.c(142):id5100_set_vfo returning2(-5) Communication timed out
id5100_get_freq2(198): vfo=VFOA
4:frame.c(456):icom_transaction entered
icom_transaction: cmd=0x03, subcmd=0xffffffff, payload_len=0
5:frame.c(143):icom_one_transaction entered
write_block(): TX 6 bytes
0000 fe fe 8c e0 03 fd ......
read_string_generic called, rxmax=200 direct=1, expected_len=1
read_string_generic(1362): retrying read timeout 1/1 timeout=1000
read_string_generic(): Timed out 2.048 seconds after 0 chars, direct=1
5:frame.c(325):icom_one_transaction returning(-5) Communication timed out
Communication timed out
Communication timed out
icom_transaction: failed:
4:frame.c(487):icom_transaction returning(-5) Communication timed out
id5100.c(142):id5100_set_vfo returning2(-5) Communication timed out
id5100_get_freq2(198): vfo=VFOA
4:frame.c(456):icom_transaction entered
icom_transaction: cmd=0x03, subcmd=0xffffffff, payload_len=0
5:frame.c(143):icom_one_transaction entered
write_block(): TX 6 bytes
0000 fe fe 8c e0 03 fd ......
read_string_generic called, rxmax=200 direct=1, expected_len=1
read_string_generic(1362): retrying read timeout 1/1 timeout=1000
read_string_generic(): Timed out 2.048 seconds after 0 chars, direct=1
5:frame.c(325):icom_one_transaction returning(-5) Communication timed out
Communication timed out
Communication timed out
Communication timed out
4:id5100.c(83):id5100_set_vfo entered
5:frame.c(456):icom_transaction entered
icom_transaction: cmd=0x07, subcmd=0xd0, payload_len=0
6:frame.c(143):icom_one_transaction entered
write_block(): TX 7 bytes
0000 fe fe 8c e0 07 d0 fd .......
6:frame.c(325):icom_one_transaction returning(-5) Communication timed out
icom_transaction: retry=0:
Communication timed out
Communication timed out
4:id5100.c(83):id5100_set_vfo entered
5:frame.c(456):icom_transaction entered
icom_transaction: cmd=0x07, subcmd=0xd0, payload_len=0
6:frame.c(143):icom_one_transaction entered
write_block(): TX 7 bytes
0000 fe fe 8c e0 07 d0 fd .......
read_string_generic called, rxmax=200 direct=1, expected_len=1
read_string_generic(1362): retrying read timeout 1/1 timeout=1000
read_string_generic(): Timed out 2.051 seconds after 0 chars, direct=1
6:frame.c(325):icom_one_transaction returning(-5) Communication timed out
Communication timed out
Communication timed out
icom_transaction: failed:
Communication timed out
4:id5100.c(83):id5100_set_vfo entered
5:frame.c(456):icom_transaction entered
icom_transaction: cmd=0x07, subcmd=0xd0, payload_len=0
6:frame.c(143):icom_one_transaction entered
write_block(): TX 7 bytes
0000 fe fe 8c e0 07 d0 fd .......
read_string_generic called, rxmax=200 direct=1, expected_len=1
read_string_generic(1362): retrying read timeout 1/1 timeout=1000
read_string_generic(): Timed out 2.051 seconds after 0 chars, direct=1
6:frame.c(325):icom_one_transaction returning(-5) Communication timed out
Communication timed out
Communication timed out
Communication timed out
id5100.c(142):id5100_set_vfo returning2(-5) Communication timed out
4:rig_get_freq: elapsed=6534ms
4:rig.c(2447):rig_get_freq returning(5)
4:network.c(1485):network_multicast_publisher_start entered
network.c(1490): multicast publisher address=224.0.0.1, port=4532
is_networked: network IfType = 71, name=WiFi
network_init: WSAStartup OK
network.c(1565) MULTICAST_TRANSCEIVE enabled
network.c(1571) MULTICAST_SPECTRUM enabled
4:network.c(1619):network_multicast_publisher_start returning(0)
4:network.c(1692):network_multicast_receiver_start entered
network.c(936): Starting multicast publisher
network.c(1697): multicast receiver address=224.0.0.2, port=4532
4:network.c(1785):network_multicast_receiver_start returning(0)
network.c(1263): Starting multicast receiver
4:event.c(271):rig_poll_routine_start entered
4:event.c(311):rig_poll_routine_start returning(0)
event.c(85): Starting rig poll routine thread
rig.c(274):add_opened_rig entered
rig.c(286):add_opened_rig returning2(0)
rig.c(1561):rig_open returning2(0)
Opened rig model 3071, 'ID-5100'
rig_set_cache_timeout_ms: called selection=0, ms=1000
Backend version: 20231209.9, Status: Beta
is_networked: network IfType = 71, name=WiFi
main: Using IPV6
multicast_publisher: error sending UDP packet: No error
main: rigctld listening on port 4532
multicast_publisher: error sending UDP packet: No error
multicast_publisher: error sending UDP packet: No error
is_networked: network IfType = 71, name=WiFi
multicast_receiver: wireless detected
multicast_receiver: multicast binding to INADDR_ANY
multicast_publisher: error sending UDP packet: No error
multicast_publisher: error sending UDP packet: No error
You don't need the "-c" switch.
You have the most recent firmware?
M 1.22S 1.01C 1.21DSP 1.14GPS 2.00
What kind of serial cable? If an older serial cable may need RTS or DTR set high.
--set-conf=rts_state=1--set-conf=dtr_state=1
One of these may be needed.
Mike W9MDB
Hi Mike, Thank you for your reply.
I have changed the setting on the radio and in the rigctld file, but still get the following error:
rigctld.c(639) Startup: C:\Program Files\hamlib-w64-4.6~git\bin\rigctld.exe -c 140 -m 3071-s -r COM6 -vvvvv 19200
rigctld Hamlib 4.6~git 2023-12-30T14:18:44Z SHA=987738 64-bit
Report bugs to hamlib-developer@lists.sourceforge.net
Max# of rigctld client services=32
rig_check_rig_caps: p1=0000000063D123C0, p2=0000000063D18940, rig_model=0000000063D123C0, macro_name=0000000063D18940
initrigs4_icom: _init called
rig_init: rig_model=Icom ID-5100 20231209.9
rig_init: rig has VFO_A
rig_init: rig has VFO_B
rig_init: rig has VFO_SUB
rig_init: rig has VFO_MAIN
2:icom.c(627):icom_init entered
icom_init: done
2:icom.c(731):icom_init returning(0)
main: twiddle=0, uplink=0, twiddle_rit=0
rig_token_lookup called for civaddr
rig_confparam_lookup called for civaddr
rig_set_conf called
rig_confparam_lookup called for 1
rig_set_conf: civaddr='140'
2:icom.c(5109):icom_set_conf entered
2:icom.c(5139):icom_set_conf returning(0)
rig.c(897):rig_open entered
rig_settings_get_path: path=\Users\M0JTL/.hamlib_settings
rig_settings_load_all: settings_file (\Users\M0JTL/.hamlib_settings): No such file or directory
rig_open: cwd=C:\Program Files\hamlib-w64-4.6~git\bin
rig_open: C:\Program Files\hamlib-w64-4.6~git\bin/hamlib_settings does not exist
rig_open: async_data_enable=0, async_data_supported=0
serial_open: COM6
serial_setup: tcgetattr
serial_setup: cfsetispeed=19200,0x000e
serial_setup: cfsetospeed=19200,0x000e
serial_setup: data_bits=8
serial_setup: parity=0
serial_setup: Handshake=None
serial_setup: tcsetattr TCSANOW
2:rig.c(7975):async_data_handler_start entered
async_data_handler_start: async data support disabled since async_data_enabled=0
2:rig.c(7982):async_data_handler_start returning(0)
rig_open: 000000000064744C rs->comm_state==1?=1
2:icom.c(994):icom_rig_open entered
icom_rig_open: ID-5100 v20231209.9
3:icom.c(779):icom_get_usb_echo_off entered
4:frame.c(456):icom_transaction entered
icom_transaction: cmd=0x03, subcmd=0xffffffff, payload_len=0
5:frame.c(143):icom_one_transaction entered
write_block(): TX 6 bytes
0000 fe fe 8c e0 03 fd ......
5:frame.c(325):icom_one_transaction returning(-5) Communication timed out
icom_transaction: retry=0: serial_setup: tcsetattr TCSANOW
2:rig.c(7975):async_data_handler_start entered
async_data_handler_start: async data support disabled since async_data_enabled=0
2:rig.c(7982):async_data_handler_start returning(0)
rig_open: 000000000064744C rs->comm_state==1?=1
2:icom.c(994):icom_rig_open entered
icom_rig_open: ID-5100 v20231209.9
3:icom.c(779):icom_get_usb_echo_off entered
4:frame.c(456):icom_transaction entered
icom_transaction: cmd=0x03, subcmd=0xffffffff, payload_len=0
5:frame.c(143):icom_one_transaction entered
write_block(): TX 6 bytes
0000 fe fe 8c e0 03 fd ......
read_string_generic called, rxmax=200 direct=1, expected_len=1
read_string_generic(1362): retrying read timeout 1/1 timeout=1000
read_string_generic(): Timed out 2.073 seconds after 0 chars, direct=1
5:frame.c(325):icom_one_transaction returning(-5) Communication timed out
Communication timed out
Communication timed out
icom_transaction: failed: async_data_handler_start: async data support disabled since async_data_enabled=0
2:rig.c(7982):async_data_handler_start returning(0)
rig_open: 000000000064744C rs->comm_state==1?=1
2:icom.c(994):icom_rig_open entered
icom_rig_open: ID-5100 v20231209.9
3:icom.c(779):icom_get_usb_echo_off entered
4:frame.c(456):icom_transaction entered
icom_transaction: cmd=0x03, subcmd=0xffffffff, payload_len=0
5:frame.c(143):icom_one_transaction entered
write_block(): TX 6 bytes
0000 fe fe 8c e0 03 fd ......
read_string_generic called, rxmax=200 direct=1, expected_len=1
read_string_generic(1362): retrying read timeout 1/1 timeout=1000
read_string_generic(): Timed out 2.073 seconds after 0 chars, direct=1
5:frame.c(325):icom_one_transaction returning(-5) Communication timed out
Communication timed out
Communication timed out
Communication timed out
4:frame.c(487):icom_transaction returning(-5) Communication timed out
3:icom.c(787):icom_get_usb_echo_off returning(-5) Communication timed out
icom_rig_open: echo status result=-5
icom_rig_open: echo status unknown
3:icom.c(779):icom_get_usb_echo_off entered
4:frame.c(456):icom_transaction entered
icom_transaction: cmd=0x03, subcmd=0xffffffff, payload_len=0
5:frame.c(143):icom_one_transaction entered
write_block(): TX 6 bytes
0000 fe fe 8c e0 03 fd ......
5:frame.c(325):icom_one_transaction returning(-5) Communication timed out
icom_transaction: retry=0:
4:frame.c(487):icom_transaction returning(-5) Communication timed out
3:icom.c(787):icom_get_usb_echo_off returning(-5) Communication timed out
icom_rig_open: echo status result=-5
icom_rig_open: echo status unknown
3:icom.c(779):icom_get_usb_echo_off entered
4:frame.c(456):icom_transaction entered
icom_transaction: cmd=0x03, subcmd=0xffffffff, payload_len=0
5:frame.c(143):icom_one_transaction entered
write_block(): TX 6 bytes
0000 fe fe 8c e0 03 fd ......
read_string_generic called, rxmax=200 direct=1, expected_len=1
read_string_generic(1362): retrying read timeout 1/1 timeout=1000
read_string_generic(): Timed out 2.064 seconds after 0 chars, direct=1
5:frame.c(325):icom_one_transaction returning(-5) Communication timed out
Communication timed out
Communication timed out
icom_transaction: failed:
3:icom.c(787):icom_get_usb_echo_off returning(-5) Communication timed out
icom_rig_open: echo status result=-5
icom_rig_open: echo status unknown
3:icom.c(779):icom_get_usb_echo_off entered
4:frame.c(456):icom_transaction entered
icom_transaction: cmd=0x03, subcmd=0xffffffff, payload_len=0
5:frame.c(143):icom_one_transaction entered
write_block(): TX 6 bytes
0000 fe fe 8c e0 03 fd ......
read_string_generic called, rxmax=200 direct=1, expected_len=1
read_string_generic(1362): retrying read timeout 1/1 timeout=1000
read_string_generic(): Timed out 2.064 seconds after 0 chars, direct=1
5:frame.c(325):icom_one_transaction returning(-5) Communication timed out
Communication timed out
Communication timed out
Communication timed out
4:frame.c(487):icom_transaction returning(-5) Communication timed out
3:icom.c(787):icom_get_usb_echo_off returning(-5) Communication timed out
icom_rig_open: echo status result=-5
icom_rig_open: echo status unknown
2:icom.c(1145):icom_rig_open returning(0)
rig_open: vfo_curr=currVFO, tx_vfo=TX
rig_open: default vfo = currVFO
2:rig.c(8019):morse_data_handler_start entered
morse_data_handler_start(8038): keyspd=25
2:rig.c(8049):morse_data_handler_start returning(0)
morse_data_handler: Starting morse data handler thread
2:rig.c(2258):rig_get_freq entered
rig_get_freq called vfo=VFOA
rig_get_freq(2277) called vfo=VFOA
vfo_fixup:(from rig_get_freq:2283) vfo=VFOA, vfo_curr=currVFO, split=0
rig.c(2286) vfo=VFOA, curr_vfo=currVFO
rig_get_freq: cache miss age=1000000ms, cached_vfo=VFOA, asked_vfo=VFOA, use_cached_freq=0
rig_get_freq(2393): vfo_opt=0, model=3071
rig.c(2440) trace
3:id5100.c(83):id5100_set_vfo entered
4:frame.c(456):icom_transaction entered
icom_transaction: cmd=0x07, subcmd=0xd0, payload_len=0
5:frame.c(143):icom_one_transaction entered
write_block(): TX 7 bytes
0000 fe fe 8c e0 07 d0 fd .......
5:frame.c(325):icom_one_transaction returning(-5) Communication timed out
icom_transaction: retry=0: rig_get_cache(275): vfo=VFOA, current_vfo=currVFO
rig_get_cache(470): vfo=VFOA, freq=0, mode=, width=0
rig_get_freq(2357): freqMainA=0, modeMainA=, widthMainA=0
rig_get_freq(2357): freqMainB=0, modeMainB=, widthMainB=0
rig_get_freq: cache miss age=1000000ms, cached_vfo=VFOA, asked_vfo=VFOA, use_cached_freq=0
rig_get_freq(2393): vfo_opt=0, model=3071
rig.c(2440) trace
3:id5100.c(83):id5100_set_vfo entered
4:frame.c(456):icom_transaction entered
icom_transaction: cmd=0x07, subcmd=0xd0, payload_len=0
5:frame.c(143):icom_one_transaction entered
write_block(): TX 7 bytes
0000 fe fe 8c e0 07 d0 fd .......
read_string_generic called, rxmax=200 direct=1, expected_len=1
read_string_generic(1362): retrying read timeout 1/1 timeout=1000
read_string_generic(): Timed out 2.099 seconds after 0 chars, direct=1
5:frame.c(325):icom_one_transaction returning(-5) Communication timed out
Communication timed out
Communication timed out
icom_transaction: failed: rig_get_freq(2357): freqMainA=0, modeMainA=, widthMainA=0
rig_get_freq(2357): freqMainB=0, modeMainB=, widthMainB=0
rig_get_freq: cache miss age=1000000ms, cached_vfo=VFOA, asked_vfo=VFOA, use_cached_freq=0
rig_get_freq(2393): vfo_opt=0, model=3071
rig.c(2440) trace
3:id5100.c(83):id5100_set_vfo entered
4:frame.c(456):icom_transaction entered
icom_transaction: cmd=0x07, subcmd=0xd0, payload_len=0
5:frame.c(143):icom_one_transaction entered
write_block(): TX 7 bytes
0000 fe fe 8c e0 07 d0 fd .......
read_string_generic called, rxmax=200 direct=1, expected_len=1
read_string_generic(1362): retrying read timeout 1/1 timeout=1000
read_string_generic(): Timed out 2.099 seconds after 0 chars, direct=1
5:frame.c(325):icom_one_transaction returning(-5) Communication timed out
Communication timed out
Communication timed out
Communication timed out
4:frame.c(487):icom_transaction returning(-5) Communication timed out
id5100.c(142):id5100_set_vfo returning2(-5) Communication timed out
id5100_get_freq2(198): vfo=VFOA
4:frame.c(456):icom_transaction entered
icom_transaction: cmd=0x03, subcmd=0xffffffff, payload_len=0
5:frame.c(143):icom_one_transaction entered
write_block(): TX 6 bytes
0000 fe fe 8c e0 03 fd ......
5:frame.c(325):icom_one_transaction returning(-5) Communication timed out
icom_transaction: retry=0:
Communication timed out
4:frame.c(487):icom_transaction returning(-5) Communication timed out
id5100.c(142):id5100_set_vfo returning2(-5) Communication timed out
id5100_get_freq2(198): vfo=VFOA
4:frame.c(456):icom_transaction entered
icom_transaction: cmd=0x03, subcmd=0xffffffff, payload_len=0
5:frame.c(143):icom_one_transaction entered
write_block(): TX 6 bytes
0000 fe fe 8c e0 03 fd ......
read_string_generic called, rxmax=200 direct=1, expected_len=1
read_string_generic(1362): retrying read timeout 1/1 timeout=1000
read_string_generic(): Timed out 2.048 seconds after 0 chars, direct=1
5:frame.c(325):icom_one_transaction returning(-5) Communication timed out
Communication timed out
Communication timed out
icom_transaction: failed:
4:frame.c(487):icom_transaction returning(-5) Communication timed out
id5100.c(142):id5100_set_vfo returning2(-5) Communication timed out
id5100_get_freq2(198): vfo=VFOA
4:frame.c(456):icom_transaction entered
icom_transaction: cmd=0x03, subcmd=0xffffffff, payload_len=0
5:frame.c(143):icom_one_transaction entered
write_block(): TX 6 bytes
0000 fe fe 8c e0 03 fd ......
read_string_generic called, rxmax=200 direct=1, expected_len=1
read_string_generic(1362): retrying read timeout 1/1 timeout=1000
read_string_generic(): Timed out 2.048 seconds after 0 chars, direct=1
5:frame.c(325):icom_one_transaction returning(-5) Communication timed out
Communication timed out
Communication timed out
Communication timed out
4:frame.c(487):icom_transaction returning(-5) Communication timed out
4:id5100.c(83):id5100_set_vfo entered
5:frame.c(456):icom_transaction entered
icom_transaction: cmd=0x07, subcmd=0xd0, payload_len=0
6:frame.c(143):icom_one_transaction entered
write_block(): TX 7 bytes
0000 fe fe 8c e0 07 d0 fd .......
6:frame.c(325):icom_one_transaction returning(-5) Communication timed out
icom_transaction: retry=0:
Communication timed out
Communication timed out
4:frame.c(487):icom_transaction returning(-5) Communication timed out
4:id5100.c(83):id5100_set_vfo entered
5:frame.c(456):icom_transaction entered
icom_transaction: cmd=0x07, subcmd=0xd0, payload_len=0
6:frame.c(143):icom_one_transaction entered
write_block(): TX 7 bytes
0000 fe fe 8c e0 07 d0 fd .......
read_string_generic called, rxmax=200 direct=1, expected_len=1
read_string_generic(1362): retrying read timeout 1/1 timeout=1000
read_string_generic(): Timed out 2.051 seconds after 0 chars, direct=1
6:frame.c(325):icom_one_transaction returning(-5) Communication timed out
Communication timed out
Communication timed out
icom_transaction: failed:
Communication timed out
4:frame.c(487):icom_transaction returning(-5) Communication timed out
4:id5100.c(83):id5100_set_vfo entered
5:frame.c(456):icom_transaction entered
icom_transaction: cmd=0x07, subcmd=0xd0, payload_len=0
6:frame.c(143):icom_one_transaction entered
write_block(): TX 7 bytes
0000 fe fe 8c e0 07 d0 fd .......
read_string_generic called, rxmax=200 direct=1, expected_len=1
read_string_generic(1362): retrying read timeout 1/1 timeout=1000
read_string_generic(): Timed out 2.051 seconds after 0 chars, direct=1
6:frame.c(325):icom_one_transaction returning(-5) Communication timed out
Communication timed out
Communication timed out
Communication timed out
5:frame.c(487):icom_transaction returning(-5) Communication timed out
id5100.c(142):id5100_set_vfo returning2(-5) Communication timed out
4:rig_get_freq: elapsed=6534ms
4:rig.c(2447):rig_get_freq returning(5)
4:network.c(1485):network_multicast_publisher_start entered
network.c(1490): multicast publisher address=224.0.0.1, port=4532
is_networked: network IfType = 71, name=WiFi
network_init: WSAStartup OK
network.c(1565) MULTICAST_TRANSCEIVE enabled
network.c(1571) MULTICAST_SPECTRUM enabled
4:network.c(1619):network_multicast_publisher_start returning(0)
4:network.c(1692):network_multicast_receiver_start entered
network.c(936): Starting multicast publisher
network.c(1697): multicast receiver address=224.0.0.2, port=4532
4:network.c(1785):network_multicast_receiver_start returning(0)
network.c(1263): Starting multicast receiver
4:event.c(271):rig_poll_routine_start entered
4:event.c(311):rig_poll_routine_start returning(0)
event.c(85): Starting rig poll routine thread
rig.c(274):add_opened_rig entered
rig.c(286):add_opened_rig returning2(0)
rig.c(1561):rig_open returning2(0)
Opened rig model 3071, 'ID-5100'
rig_set_cache_timeout_ms: called selection=0, ms=1000
Backend version: 20231209.9, Status: Beta
is_networked: network IfType = 71, name=WiFi
main: Using IPV6
multicast_publisher: error sending UDP packet: No error
main: rigctld listening on port 4532
multicast_publisher: error sending UDP packet: No error
multicast_publisher: error sending UDP packet: No error
is_networked: network IfType = 71, name=WiFi
multicast_receiver: wireless detected
multicast_receiver: multicast binding to INADDR_ANY
multicast_publisher: error sending UDP packet: No error
multicast_publisher: error sending UDP packet: No error
Attachments:
Icom ID-5100 Hamlib Settings
Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/hamlib/discussion/25919/
To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/
I am using a USB to COM adapter, it works fine for my Yaesu FT 897 using WSJT-x, but maybe this adapter is the problem??
I'm not a Icom guy, so this CI-V is all new to me
Ian. M0JTL
The ID5100 does not have a DB9 connector. How are you hooking into the CI-V jack?
CI-V is not 12V RS232.
You probably need a new CI-V cable like this:
https://www.dxengineering.com/parts/rtp-usb-29a
Mike W9MDB
I am using a USB to COM adapter, it works fine for my Yaesu FT 897 using WSJT-x, but maybe this adapter is the problem??
I'm not a Icom guy, so this CI-V is all new to me
Ian. M0JTL
Icom ID-5100 Hamlib Settings
Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/hamlib/discussion/25919/
To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/
This is the cable I got:
https://www.ebay.co.uk/itm/233733568187
That doesn't say what the pinouts are but may need a null modem adapter to swap pins 2&3 for it to work with your serial port.
Mike W9MDB
This is the cable I got:
https://www.ebay.co.uk/itm/233733568187
Icom ID-5100 Hamlib Settings
Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/hamlib/discussion/25919/
To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/
Like this:https://www.ebay.co.uk/itm/313618964594?hash=item490525a072:g:Xr8AAOSwY45URpUZ&amdata=enc%3AAQAIAAAA4DeC4indonYxVgxnPEQHBraI2Nb2xTmGnX4gVlHiP5zUTpF7qSrz6V5KbHZV8tXfBUl4MLtRgRt7Y%2BOt63ySBPk2vjUwdPLo0t24aprLEiydVAY7d2S1S%2BwIJg8kg8s85lci3UfCiYVzDK57J%2BRJvYaMm7EMwz%2BfiF9GpMSd73Frt6r00QLnWenPg8kOy0%2FjxwGbtnr1%2FYIg4aYdv%2BcmtPFmYVVKXrEy5P%2Fz1Uw1jHrul%2BSGiYOmZF9ZSkmzyXmhz20xDnEKuhPLecTWMk5GB5s2uciQQZg7Uqpb2xumE9L8%7Ctkp%3ABk9SR8zcvr-ZYw
That doesn't say what the pinouts are but may need a null modem adapter to swap pins 2&3 for it to work with your serial port.
Mike W9MDB
This is the cable I got:
https://www.ebay.co.uk/itm/233733568187
Icom ID-5100 Hamlib Settings
Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/hamlib/discussion/25919/
To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/