i have a Funkamateur FA-SDR,
USB ID 16C0 - 05DC Name DG8SAQ-I2C
SoftRock Si570
ZADIG 2.8 have libusb0 1.2.7.3 or WinUSB v 6.1.7600.16385
on Win 11-64 works WSJT-X fine: Test-CAT -> ok green, Test PTT ok red
on Win10-86 not works
i find differenz on Baud Rate.: 38400 on 64 Bit, 4800 on 32 Bit. it is grey, not configurable ...
i find hamlib and libusb and IO Errors
Thanks for help.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
C:\Users[username]\AppData\Local\WSJT-X
The WSJT-X_Rigcontrol.log file will be in the same location
Here's a youtube video showing Windows users howto -- https://www.youtube.com/watch?v=q9tAvhNmSvc
For Linux put it in
~/.config
The WSJT-X_Rigcontrol.log file will be here:
~/.local/share/WSJT-X
For MacOS put it in
/Users/[username]/Library/Preferences
Restart WSJT-X and duplicate the problem.
Shut down WSJT-X
Then send me the WSJT-X_RigControl.log file
Mike W9MDB
i have a Funkamateur FA-SDR,
USB ID 16C0 - 05DC Name DG8SAQ-I2C
SoftRock Si570
ZADIG 2.8 have libusb0 1.2.7.3 or WinUSB v 6.1.7600.16385
on Win 11-64 works WSJT-X fine: Test-CAT -> ok green, Test PTT ok red
on Win10-86 not works
i find differenz on Baud Rate.: 38400 on 64 Bit, 4800 on 32 Bit. it is grey, not configurable ...
i find hamlib and libusb and IO Errors
Thanks for help.
Von: Michael Black
Gesendet: Sonntag, 31. März 2024 23:29
An: [hamlib:discussion]
Betreff: [hamlib:discussion] Re: Funkamateur FA-SDR WSJT-X 2.7.0 RC4 Win10-86 / Win11-64
Please place this file as described below https://www.dropbox.com/s/t52ngcalsgnpm8m/wsjtx_log_config.ini?dl=0
C:\Users[username]\AppData\Local\WSJT-X
The WSJT-X_Rigcontrol.log file will be in the same location
Here's a youtube video showing Windows users howto -- https://www.youtube.com/watch?v=q9tAvhNmSvc
For Linux put it in
~/.config
The WSJT-X_Rigcontrol.log file will be here:
~/.local/share/WSJT-X
For MacOS put it in
/Users/[username]/Library/Preferences
Restart WSJT-X and duplicate the problem.
Shut down WSJT-X
Then send me the WSJT-X_RigControl.log file
Mike W9MDB
On Sunday, March 31, 2024 at 03:56:10 PM CDT, Stefan Vandrey dk1van@users.sourceforge.net wrote:
i have a Funkamateur FA-SDR,
USB ID 16C0 - 05DC Name DG8SAQ-I2C
SoftRock Si570
ZADIG 2.8 have libusb0 1.2.7.3 or WinUSB v 6.1.7600.16385
on Win 11-64 works WSJT-X fine: Test-CAT -> ok green, Test PTT ok red
on Win10-86 not works
i find differenz on Baud Rate.: 38400 on 64 Bit, 4800 on 32 Bit. it is grey, not configurable ...
i find hamlib and libusb and IO Errors
Thanks for help.
Von: Michael Black
Gesendet: Sonntag, 31. März 2024 23:29
An: [hamlib:discussion]
Betreff: [hamlib:discussion] Re: Funkamateur FA-SDR WSJT-X 2.7.0 RC4 Win10-86 / Win11-64
Please place this file as described below https://www.dropbox.com/s/t52ngcalsgnpm8m/wsjtx_log_config.ini?dl=0
C:\Users[username]\AppData\Local\WSJT-X
The WSJT-X_Rigcontrol.log file will be in the same location
Here's a youtube video showing Windows users howto -- https://www.youtube.com/watch?v=q9tAvhNmSvc
For Linux put it in
~/.config
The WSJT-X_Rigcontrol.log file will be here:
~/.local/share/WSJT-X
For MacOS put it in
/Users/[username]/Library/Preferences
Restart WSJT-X and duplicate the problem.
Shut down WSJT-X
Then send me the WSJT-X_RigControl.log file
Mike W9MDB
On Sunday, March 31, 2024 at 03:56:10 PM CDT, Stefan Vandrey dk1van@users.sourceforge.net wrote:
i have a Funkamateur FA-SDR,
USB ID 16C0 - 05DC Name DG8SAQ-I2C
SoftRock Si570
ZADIG 2.8 have libusb0 1.2.7.3 or WinUSB v 6.1.7600.16385
on Win 11-64 works WSJT-X fine: Test-CAT -> ok green, Test PTT ok red
on Win10-86 not works
i find differenz on Baud Rate.: 38400 on 64 Bit, 4800 on 32 Bit. it is grey, not configurable ...
i find hamlib and libusb and IO Errors
Thanks for help.
Von: Michael Black
Gesendet: Sonntag, 31. März 2024 23:29
An: [hamlib:discussion]
Betreff: [hamlib:discussion] Re: Funkamateur FA-SDR WSJT-X 2.7.0 RC4 Win10-86 / Win11-64
Please place this file as described below https://www.dropbox.com/s/t52ngcalsgnpm8m/wsjtx_log_config.ini?dl=0
C:\Users[username]\AppData\Local\WSJT-X
The WSJT-X_Rigcontrol.log file will be in the same location
Here's a youtube video showing Windows users howto -- https://www.youtube.com/watch?v=q9tAvhNmSvc
For Linux put it in
~/.config
The WSJT-X_Rigcontrol.log file will be here:
~/.local/share/WSJT-X
For MacOS put it in
/Users/[username]/Library/Preferences
Restart WSJT-X and duplicate the problem.
Shut down WSJT-X
Then send me the WSJT-X_RigControl.log file
Mike W9MDB
On Sunday, March 31, 2024 at 03:56:10 PM CDT, Stefan Vandrey dk1van@users.sourceforge.net wrote:
i have a Funkamateur FA-SDR,
USB ID 16C0 - 05DC Name DG8SAQ-I2C
SoftRock Si570
ZADIG 2.8 have libusb0 1.2.7.3 or WinUSB v 6.1.7600.16385
on Win 11-64 works WSJT-X fine: Test-CAT -> ok green, Test PTT ok red
on Win10-86 not works
i find differenz on Baud Rate.: 38400 on 64 Bit, 4800 on 32 Bit. it is grey, not configurable ...
i find hamlib and libusb and IO Errors
Thanks for help.
Yes, i agree, Version of libusb……
Hardware: the SI570 have 3 Versions. Max Frequenz is 160MHz , i have also Nr. 2 215MHz, Nr 3 is more higher, unknown.
Hardware of FA-SDR is only one, but DIY Kit.
Start: - Test CFGSR.exe SoftRock Configuration Tool – PE0FKO
- Test Rocky 3.8.193 www.dxatlas.com
- Test zadiag-28.exe
- Wsjt-x 2.7.0 RC4
Here wsjt-x is working
i have a Funkamateur FA-SDR,
USB ID 16C0 - 05DC Name DG8SAQ-I2C
SoftRock Si570
ZADIG 2.8 have libusb0 1.2.7.3 or WinUSB v 6.1.7600.16385
on Win 11-64 works WSJT-X fine: Test-CAT -> ok green, Test PTT ok red
on Win10-86 not works
i find differenz on Baud Rate.: 38400 on 64 Bit, 4800 on 32 Bit. it is grey, not configurable ...
i find hamlib and libusb and IO Errors
Thanks for help.
Please place this file as described below
https://www.dropbox.com/s/t52ngcalsgnpm8m/wsjtx_log_config.ini?dl=0
C:\Users[username]\AppData\Local\WSJT-X
The WSJT-X_Rigcontrol.log file will be in the same location
Here's a youtube video showing Windows users howto -- https://www.youtube.com/watch?v=q9tAvhNmSvc
For Linux put it in
~/.config
The WSJT-X_Rigcontrol.log file will be here:
~/.local/share/WSJT-X
For MacOS put it in
/Users/[username]/Library/Preferences
Restart WSJT-X and duplicate the problem.
Shut down WSJT-X
Then send me the WSJT-X_RigControl.log file
Mike W9MDB
On Sunday, March 31, 2024 at 03:56:10 PM CDT, Stefan Vandrey dk1van@users.sourceforge.net wrote:
i have a Funkamateur FA-SDR,
USB ID 16C0 - 05DC Name DG8SAQ-I2C
SoftRock Si570
ZADIG 2.8 have libusb0 1.2.7.3 or WinUSB v 6.1.7600.16385
on Win 11-64 works WSJT-X fine: Test-CAT -> ok green, Test PTT ok red
on Win10-86 not works
i find differenz on Baud Rate.: 38400 on 64 Bit, 4800 on 32 Bit. it is grey, not configurable ...
i find hamlib and libusb and IO Errors
Thanks for help.
Funkamateur FA-SDR WSJT-X 2.7.0 RC4 Win10-86 / Win11-64
Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/hamlib/discussion/25919/
To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/
Hi Michael,
thank you for helping.
Stefan
Gesendet von Mail für Windows
Von: Michael Black
Gesendet: Sonntag, 31. März 2024 23:29
An: [hamlib:discussion]
Betreff: [hamlib:discussion] Re: Funkamateur FA-SDR WSJT-X 2.7.0 RC4 Win10-86 / Win11-64
Please place this file as described below
https://www.dropbox.com/s/t52ngcalsgnpm8m/wsjtx_log_config.ini?dl=0
C:\Users[username]\AppData\Local\WSJT-X
The WSJT-X_Rigcontrol.log file will be in the same location
Here's a youtube video showing Windows users howto -- https://www.youtube.com/watch?v=q9tAvhNmSvc
For Linux put it in
~/.config
The WSJT-X_Rigcontrol.log file will be here:
~/.local/share/WSJT-X
For MacOS put it in
/Users/[username]/Library/Preferences
Restart WSJT-X and duplicate the problem.
Shut down WSJT-X
Then send me the WSJT-X_RigControl.log file
Mike W9MDB
On Sunday, March 31, 2024 at 03:56:10 PM CDT, Stefan Vandrey dk1van@users.sourceforge.net wrote:
i have a Funkamateur FA-SDR,
USB ID 16C0 - 05DC Name DG8SAQ-I2C
SoftRock Si570
ZADIG 2.8 have libusb0 1.2.7.3 or WinUSB v 6.1.7600.16385
on Win 11-64 works WSJT-X fine: Test-CAT -> ok green, Test PTT ok red
on Win10-86 not works
i find differenz on Baud Rate.: 38400 on 64 Bit, 4800 on 32 Bit. it is grey, not configurable ...
i find hamlib and libusb and IO Errors
Thanks for help.
Funkamateur FA-SDR WSJT-X 2.7.0 RC4 Win10-86 / Win11-64
Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/hamlib/discussion/25919/
To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/
Funkamateur FA-SDR WSJT-X 2.7.0 RC4 Win10-86 / Win11-64
Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/hamlib/discussion/25919/
To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/
Also...did this ever work with WSJT-X before?
Mike W9MDB
Hi Michael,
thank you for helping.
Stefan
Gesendet von Mail für Windows
Von: Michael Black
Gesendet: Sonntag, 31. März 2024 23:29
An: [hamlib:discussion]
Betreff: [hamlib:discussion] Re: Funkamateur FA-SDR WSJT-X 2.7.0 RC4 Win10-86 / Win11-64
Please place this file as described below
https://www.dropbox.com/s/t52ngcalsgnpm8m/wsjtx_log_config.ini?dl=0
C:\Users[username]\AppData\Local\WSJT-X
The WSJT-X_Rigcontrol.log file will be in the same location
Here's a youtube video showing Windows users howto -- https://www.youtube.com/watch?v=q9tAvhNmSvc
For Linux put it in
~/.config
The WSJT-X_Rigcontrol.log file will be here:
~/.local/share/WSJT-X
For MacOS put it in
/Users/[username]/Library/Preferences
Restart WSJT-X and duplicate the problem.
Shut down WSJT-X
Then send me the WSJT-X_RigControl.log file
Mike W9MDB
On Sunday, March 31, 2024 at 03:56:10 PM CDT, Stefan Vandrey dk1van@users.sourceforge.net wrote:
i have a Funkamateur FA-SDR,
USB ID 16C0 - 05DC Name DG8SAQ-I2C
SoftRock Si570
ZADIG 2.8 have libusb0 1.2.7.3 or WinUSB v 6.1.7600.16385
on Win 11-64 works WSJT-X fine: Test-CAT -> ok green, Test PTT ok red
on Win10-86 not works
i find differenz on Baud Rate.: 38400 on 64 Bit, 4800 on 32 Bit. it is grey, not configurable ...
i find hamlib and libusb and IO Errors
Thanks for help.
Funkamateur FA-SDR WSJT-X 2.7.0 RC4 Win10-86 / Win11-64
Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/hamlib/discussion/25919/
To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/
Funkamateur FA-SDR WSJT-X 2.7.0 RC4 Win10-86 / Win11-64
Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/hamlib/discussion/25919/
To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/
Funkamateur FA-SDR WSJT-X 2.7.0 RC4 Win10-86 / Win11-64
Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/hamlib/discussion/25919/
To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/
Yes, Yesterday, only on Win11-64, but only one time.
Also...did this ever work with WSJT-X before?
Mike W9MDB
Apparently there are some problems with this device and libusb. https://github.com/libusb/libusb/issues/1300
Try the latest libusb and send me another log. Place this file to replace the one in the bin directory.
https://www.dropbox.com/scl/fi/oz5dajakeu1lcpqmbxjba/libusb-1.0.dll?rlkey=r33kmkqjxqet46t0vnz7ro6zs&dl=1
Mike W9MDB
Hi Michael,
thank you for helping.
Stefan
Gesendet von Mail für Windows
Von: Michael Black
Gesendet: Sonntag, 31. März 2024 23:29
An: [hamlib:discussion]
Betreff: [hamlib:discussion] Re: Funkamateur FA-SDR WSJT-X 2.7.0 RC4 Win10-86 / Win11-64
Please place this file as described below
https://www.dropbox.com/s/t52ngcalsgnpm8m/wsjtx_log_config.ini?dl=0
C:\Users[username]\AppData\Local\WSJT-X
The WSJT-X_Rigcontrol.log file will be in the same location
Here's a youtube video showing Windows users howto -- https://www.youtube.com/watch?v=q9tAvhNmSvc
For Linux put it in
~/.config
The WSJT-X_Rigcontrol.log file will be here:
~/.local/share/WSJT-X
For MacOS put it in
/Users/[username]/Library/Preferences
Restart WSJT-X and duplicate the problem.
Shut down WSJT-X
Then send me the WSJT-X_RigControl.log file
Mike W9MDB
On Sunday, March 31, 2024 at 03:56:10 PM CDT, Stefan Vandrey dk1van@users.sourceforge.net wrote:
i have a Funkamateur FA-SDR,
USB ID 16C0 - 05DC Name DG8SAQ-I2C
SoftRock Si570
ZADIG 2.8 have libusb0 1.2.7.3 or WinUSB v 6.1.7600.16385
on Win 11-64 works WSJT-X fine: Test-CAT -> ok green, Test PTT ok red
on Win10-86 not works
i find differenz on Baud Rate.: 38400 on 64 Bit, 4800 on 32 Bit. it is grey, not configurable ...
i find hamlib and libusb and IO Errors
Thanks for help.
Funkamateur FA-SDR WSJT-X 2.7.0 RC4 Win10-86 / Win11-64
Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/hamlib/discussion/25919/
To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/
Funkamateur FA-SDR WSJT-X 2.7.0 RC4 Win10-86 / Win11-64
Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/hamlib/discussion/25919/
To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/
Funkamateur FA-SDR WSJT-X 2.7.0 RC4 Win10-86 / Win11-64
Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/hamlib/discussion/25919/
To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/
Yes, i agree, Version of libusb……
Hardware: the SI570 have 3 Versions. Max Frequenz is 160MHz , i have also Nr. 2 215MHz, Nr 3 is more higher, unknown.
Hardware of FA-SDR is only one, but DIY Kit.
Start: - Test CFGSR.exe SoftRock Configuration Tool – PE0FKO
- Test Rocky 3.8.193 www.dxatlas.com
- Test zadiag-28.exe
- Wsjt-x 2.7.0 RC4
Here wsjt-x is working
Libusb-1.0.dll is not working
Here i need 32 Bit
Hi Mike,
today i take a new PC Win 10 x64.
Here the errors:
1 Test original Files
2 replace usblib
3 replace hamlib
Last edit: Stefan Vandrey 2024-04-02
Try this DLL. It's a 32-bit compile of the latest libusb so hopefully it works. If not this is a bug in libusb.
Send me a log using this one....
https://www.dropbox.com/scl/fi/oz5dajakeu1lcpqmbxjba/libusb-1.0.dll?rlkey=r33kmkqjxqet46t0vnz7ro6zs&dl=1
Mike W9MDB
On Tuesday, April 2, 2024 at 10:36:13 AM CDT, Stefan Vandrey dk1van@users.sourceforge.net wrote:
Hi Mike,
today i take a new PC Win 10 x64.
Here the errors:
Attachments:
* newhamlib4.jpg (48.0 kB; image/jpeg)
* updatehamlib.jpg (153.0 kB; image/jpeg)
* win10-64.jpg (249.2 kB; image/jpeg)
* WSJT-X_RigControl.log (44.8 kB; application/octet-stream)
* wsjtx_syslog.log (18.1 kB; application/octet-stream)
Funkamateur FA-SDR WSJT-X 2.7.0 RC4 Win10-86 / Win11-64
Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/hamlib/discussion/25919/
To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/