Yaesu FT-710 - Rig Error: Get Frequency Error
Library to control radio transceivers and receivers
Brought to you by:
n0nb
Menu
▾
▴
I have connected my Yaesu FT-710 to a laptop using a USB cable, attempted to use a logging app (QLog) that uses hamlib to connect with the transceiver but I get an error: 'Get Frequency Error', 'Error Detail: rig_get_freq(2130): vfo_opt=0, model=1049'. See attached screenshots for settings used and error message. Does anyone have any suggestions? Any help is much appreciated.
Hi, I have same problems...
See my post at Qlog discussions
https://github.com/foldynl/QLog/discussions/348
Well, picking up on this thread, I've been noticing several issues with my FT710 and how the CAT works.
I don't know if this should be addressed here, or if the problem is with HAMLIB's external libraries, but since we've started it...
When connecting the radio, whether I use the definition of FT-710 or FTDX10 I have communication, and, in principle, it works.
But there are several functions that either fail or do not behave correctly.
In short, I tend to use the FTDX10 configuration before that of the radio since at least the split works well, and I only use the Yaesu FT710 configuration if I have previously done digital modes, since if the bands are configured in DATA-U in connected QLOG gives me an error, with the definition FTDX10.