From: <mar...@us...> - 2007-08-27 15:37:53
|
Revision: 1280 http://hackndev.svn.sourceforge.net/hackndev/?rev=1280&view=rev Author: marex_z71 Date: 2007-08-26 16:32:23 -0700 (Sun, 26 Aug 2007) Log Message: ----------- PalmTX: cleanup, dont use lines longer than 80 characters no matter what Modified Paths: -------------- linux4palm/linux/trunk/arch/arm/mach-pxa/palmtx/palmtx_pm.c Modified: linux4palm/linux/trunk/arch/arm/mach-pxa/palmtx/palmtx_pm.c =================================================================== --- linux4palm/linux/trunk/arch/arm/mach-pxa/palmtx/palmtx_pm.c 2007-08-26 10:17:16 UTC (rev 1279) +++ linux4palm/linux/trunk/arch/arm/mach-pxa/palmtx/palmtx_pm.c 2007-08-26 23:32:23 UTC (rev 1280) @@ -49,9 +49,10 @@ /* Turn off USB power */ SET_PALMTX_GPIO(USB_POWER,0); - - /* disable GPIO reset - DO NOT REMOVE!!!!!!!! Palm totally hangs on reset without disabling GPIO reset during sleep */ + /* disable GPIO reset - DO NOT REMOVE !!!!!!!! + Palm totally hangs on reset without disabling + GPIO reset during sleep */ PCFR = PCFR_GPROD; return 0; @@ -59,16 +60,15 @@ static int palmtx_resume(struct device *dev) { - /* Disabled Deep-Sleep mode */ PCFR &= PCFR_DS; - /* Re-enable GPIO reset */ - PCFR |= PCFR_GPR_EN; /* !! DO NOT REMOVE !! THIS IS NECCESARY FOR ENABLE PALM RESET !! */ + /* Re-enable GPIO reset + !! DO NOT REMOVE !! + !! THIS IS NECCESARY TO ENABLE PALM RESET !! */ + PCFR |= PCFR_GPR_EN; - - /* Here are all of special to resume Palm TX */ - + /* Below is all the special stuff to resume Palm TX */ /* Turn on USB power */ SET_PALMTX_GPIO(USB_POWER,1); This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site. |