[Hackndev-commit] SF.net SVN: hackndev: [1185] linux4palm/linux/trunk/arch/arm/mach-pxa/ palmz72/palmz72.c

[<hap...@us...>]

Revision: 1185
          http://svn.sourceforge.net/hackndev/?rev=1185&view=rev
Author:   happy-slapin
Date:     2007-07-20 07:17:00 -0700 (Fri, 20 Jul 2007)

Log Message:
-----------
z72: cleanup

Modified Paths:
--------------
    linux4palm/linux/trunk/arch/arm/mach-pxa/palmz72/palmz72.c

Modified: linux4palm/linux/trunk/arch/arm/mach-pxa/palmz72/palmz72.c
===================================================================
--- linux4palm/linux/trunk/arch/arm/mach-pxa/palmz72/palmz72.c	2007-07-20 10:18:21 UTC (rev 1184)
+++ linux4palm/linux/trunk/arch/arm/mach-pxa/palmz72/palmz72.c	2007-07-20 14:17:00 UTC (rev 1185)
@@ -31,11 +31,7 @@
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/pxa27x_keyboard.h>
 #include <asm/arch/pxa-pm_ll.h>
-#if 0
-#include <asm/arch/pxapwm-bl.h>
-#else
 #include <linux/corgi_bl.h>
-#endif
 #include <asm/arch/serial.h>
 #include <linux/gpio_keys.h>
 
@@ -117,8 +113,8 @@
 		
 	return ret;
 }
-static void palmz72_udc_command (int cmd){
-
+static void palmz72_udc_command (int cmd)
+{
 	     switch (cmd) {
               case PXA2XX_UDC_CMD_DISCONNECT:
                    SET_GPIO(GPIO_NR_PALMZ72_USB_PULLUP, 0);
@@ -359,12 +355,12 @@
 	.xres			= 320,
 	.yres			= 320,
 	.bpp			= 16,
-	.hsync_len		= 6,  // This value is optimized for older problematic LCD panels
+	.hsync_len		= 6,  /* This value is optimized for older problematic LCD panels */
 	.left_margin		= 27,
 	.right_margin		= 7,
 	.vsync_len		= 1,
-	.upper_margin		= 7,  // This value is optimized for older problematic LCD panels
-	.lower_margin		= 8,  // This value is optimized for older problematic LCD panels
+	.upper_margin		= 7,  /* This value is optimized for older problematic LCD panels */
+	.lower_margin		= 8,  /* This value is optimized for older problematic LCD panels */
     }
 };
 
@@ -510,6 +506,7 @@
 	pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD);
 	pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD);
 	pxa_gpio_mode(GPIO31_SYNC_AC97_MD);
+
 	ov9640_gpio_init();
 		
 	switch(palmz72_lcd_modes[0].bpp)
@@ -522,7 +519,6 @@
 			palmz72_lcd_screen.lccr3=0x04700004;
 			break;
 	}
-	
 	set_pxa_fb_info( &palmz72_lcd_screen );
 	pxa_set_btuart_info(&bcm2035_pxa_bt_funcs);
 	pxa_set_mci_info( &palmz72_mci_platform_data );
@@ -531,7 +527,6 @@
         platform_add_devices( devices, ARRAY_SIZE(devices) );
 }
 
-
 MACHINE_START(PALMZ72, "Palm Zire 72")
 
 	/********************************************************/
@@ -548,3 +543,4 @@
 	.timer		= &pxa_timer,
 	.init_machine	= palmz72_init
 MACHINE_END
+


This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.