Menu
▾
▴
[Hackndev-commit] SF.net SVN: hackndev: [768] linux4palm/linux/trunk/arch/arm/mach-pxa
|
From: <bob...@us...> - 2007-01-19 02:19:11
|
Revision: 768
http://svn.sourceforge.net/hackndev/?rev=768&view=rev
Author: bobofdoom
Date: 2007-01-18 18:19:09 -0800 (Thu, 18 Jan 2007)
Log Message:
-----------
palmt700wx: Added initial support.
Modified Paths:
--------------
linux4palm/linux/trunk/arch/arm/mach-pxa/Kconfig
linux4palm/linux/trunk/arch/arm/mach-pxa/Makefile
Added Paths:
-----------
linux4palm/linux/trunk/arch/arm/mach-pxa/palmt700wx/
linux4palm/linux/trunk/arch/arm/mach-pxa/palmt700wx/Kconfig
linux4palm/linux/trunk/arch/arm/mach-pxa/palmt700wx/Makefile
linux4palm/linux/trunk/arch/arm/mach-pxa/palmt700wx/palmt700wx.c
Modified: linux4palm/linux/trunk/arch/arm/mach-pxa/Kconfig
===================================================================
--- linux4palm/linux/trunk/arch/arm/mach-pxa/Kconfig 2007-01-19 02:18:21 UTC (rev 767)
+++ linux4palm/linux/trunk/arch/arm/mach-pxa/Kconfig 2007-01-19 02:19:09 UTC (rev 768)
@@ -44,6 +44,7 @@
source "arch/arm/mach-pxa/palmld/Kconfig"
source "arch/arm/mach-pxa/palmt650/Kconfig"
source "arch/arm/mach-pxa/palmt680/Kconfig"
+source "arch/arm/mach-pxa/palmt700wx/Kconfig"
source "arch/arm/mach-pxa/palmte2/Kconfig"
source "arch/arm/mach-pxa/palmt3/Kconfig"
source "arch/arm/mach-pxa/palmt5/Kconfig"
Modified: linux4palm/linux/trunk/arch/arm/mach-pxa/Makefile
===================================================================
--- linux4palm/linux/trunk/arch/arm/mach-pxa/Makefile 2007-01-19 02:18:21 UTC (rev 767)
+++ linux4palm/linux/trunk/arch/arm/mach-pxa/Makefile 2007-01-19 02:19:09 UTC (rev 768)
@@ -41,6 +41,7 @@
obj-$(CONFIG_MACH_XSCALE_PALMLD) += palmld/
obj-$(CONFIG_MACH_XSCALE_PALMTREO650) += palmt650/
obj-$(CONFIG_MACH_XSCALE_TREO680) += palmt680/
+obj-$(CONFIG_MACH_T700WX) += palmt700wx/
obj-$(CONFIG_MACH_T3XSCALE) += ssp.o palmt3/
obj-$(CONFIG_MACH_XSCALE_PALMTT5) += palmt5/
obj-$(CONFIG_MACH_XSCALE_PALMTX) += palmtx/
Added: linux4palm/linux/trunk/arch/arm/mach-pxa/palmt700wx/Kconfig
===================================================================
--- linux4palm/linux/trunk/arch/arm/mach-pxa/palmt700wx/Kconfig (rev 0)
+++ linux4palm/linux/trunk/arch/arm/mach-pxa/palmt700wx/Kconfig 2007-01-19 02:19:09 UTC (rev 768)
@@ -0,0 +1,8 @@
+menuconfig MACH_T700WX
+ bool "Palm Treo 700wx"
+ select PXA27x
+ help
+ Say Y here if you intend to run this kernel on a
+ Palm Treo 700wx. Currently there is only basic support
+ for this PDA.
+
Added: linux4palm/linux/trunk/arch/arm/mach-pxa/palmt700wx/Makefile
===================================================================
--- linux4palm/linux/trunk/arch/arm/mach-pxa/palmt700wx/Makefile (rev 0)
+++ linux4palm/linux/trunk/arch/arm/mach-pxa/palmt700wx/Makefile 2007-01-19 02:19:09 UTC (rev 768)
@@ -0,0 +1,6 @@
+#
+# Makefile for Palm Treo 700wx support
+#
+
+obj-$(CONFIG_MACH_T700WX) += palmt700wx.o
+
Added: linux4palm/linux/trunk/arch/arm/mach-pxa/palmt700wx/palmt700wx.c
===================================================================
--- linux4palm/linux/trunk/arch/arm/mach-pxa/palmt700wx/palmt700wx.c (rev 0)
+++ linux4palm/linux/trunk/arch/arm/mach-pxa/palmt700wx/palmt700wx.c 2007-01-19 02:19:09 UTC (rev 768)
@@ -0,0 +1,388 @@
+/*
+ * linux/arch/arm/mach-pxa/palmt700wx/palmt700wx.c
+ *
+ * Support for the Palm Treo 700wx.
+ *
+ * Author: you
+ *
+ * Based on palmt650.c by Alex Osborne <bob...@gm...>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+#include <linux/input.h>
+//#include <linux/irq.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/audio.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/palmt700wx-gpio.h>
+#include <asm/arch/pxa27x_keyboard.h>
+#include <asm/arch/irda.h>
+#include <asm/arch/sharpsl.h>
+#include <asm/arch/udc.h>
+
+#include <sound/driver.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/initval.h>
+#include <sound/ac97_codec.h>
+
+#include "../generic.h"
+
+/*********************************************************
+ * SD/MMC card controller
+ *********************************************************/
+
+static int palmt700wx_mci_init(struct device *dev,
+ irqreturn_t (*palmt700wx_detect_int)(int, void *, struct pt_regs *), void *data)
+{
+ int err;
+ /* setup an interrupt for detecting card insert/remove events */
+ set_irq_type(IRQ_GPIO_PALMT650_SD_DETECT_N, IRQT_BOTHEDGE);
+ err = request_irq(IRQ_GPIO_PALMT650_SD_DETECT_N, palmt700wx_detect_int,
+ SA_INTERRUPT, "SD/MMC card detect", data);
+
+ if(err) {
+ printk(KERN_ERR "palmt700wx: can't get SD/MMC card detect IRQ\n");
+ return err;
+ }
+ return 0;
+}
+
+static void palmt700wx_mci_exit(struct device *dev, void *data)
+{
+ free_irq(IRQ_GPIO_PALMT650_SD_DETECT_N, data);
+}
+
+static struct pxamci_platform_data palmt700wx_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = palmt700wx_mci_init,
+ /* .setpower = palmt700wx_mci_setpower, */
+ .exit = palmt700wx_mci_exit,
+
+};
+
+/*********************************************************
+ * AC97 audio controller
+ *********************************************************/
+
+static pxa2xx_audio_ops_t palmt700wx_audio_ops = {
+ /*
+ .startup = palmt700wx_audio_startup,
+ .shutdown = mst_audio_shutdown,
+ .suspend = mst_audio_suspend,
+ .resume = mst_audio_resume,
+ */
+};
+
+static struct platform_device palmt700wx_ac97 = {
+ .name = "pxa2xx-ac97",
+ .id = -1,
+ .dev = { .platform_data = &palmt700wx_audio_ops },
+};
+
+/*********************************************************
+ * IRDA
+ *********************************************************/
+
+static void palmt700wx_irda_transceiver_mode(struct device *dev, int mode)
+{
+#if 0
+ SET_PALMT650_GPIO(IRDA_SD, mode & IR_OFF);
+#endif
+}
+
+static struct pxaficp_platform_data palmt700wx_ficp_platform_data = {
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
+ .transceiver_mode = palmt700wx_irda_transceiver_mode,
+};
+
+/*********************************************************
+ * LEDs
+ *********************************************************/
+
+static struct platform_device palmt700wx_led = {
+ .name = "palmt700wx-led",
+ .id = -1,
+};
+
+/*********************************************************
+ * Backlight
+ *********************************************************/
+
+static void palmt700wx_set_bl_intensity(int intensity)
+{
+ PWM_CTRL0 = 0; /* pre-scalar */
+ PWM_PWDUTY0 = intensity; /* duty cycle */
+ PWM_PERVAL0 = 0x1b1; /* period */
+
+ if (intensity > 0) {
+ pxa_set_cken(CKEN0_PWM0, 1);
+ } else {
+ pxa_set_cken(CKEN0_PWM0, 0);
+ }
+}
+
+static struct corgibl_machinfo palmt700wx_bl_machinfo = {
+ .max_intensity = 0x1ad,
+ .default_intensity = 0xe5,
+ .limit_mask = 0x7f,
+ .set_bl_intensity = palmt700wx_set_bl_intensity,
+};
+
+static struct platform_device palmt700wx_bl = {
+ .name = "corgi-bl",
+ .dev = {
+ .platform_data = &palmt700wx_bl_machinfo,
+ },
+};
+
+/*********************************************************
+ * USB Device Controller
+ *********************************************************/
+
+static int udc_is_connected(void)
+{
+ return 1111;//GPLR(GPIO_PALMLD_USB_DETECT) & GPIO_bit(GPIO_PALMLD_USB_DETECT);
+}
+
+static void udc_enable(int cmd)
+{
+ /**
+ * TODO: find the GPIO line which powers up the USB.
+ */
+ switch (cmd)
+ {
+ case PXA2XX_UDC_CMD_DISCONNECT:
+ printk (KERN_NOTICE "USB cmd disconnect\n");
+ /* SET_X30_GPIO(USB_PUEN, 0); */
+ break;
+
+ case PXA2XX_UDC_CMD_CONNECT:
+ printk (KERN_NOTICE "USB cmd connect\n");
+ /* SET_X30_GPIO(USB_PUEN, 1); */
+ break;
+ }
+}
+static struct pxa2xx_udc_mach_info palmt700wx_udc_mach_info = {
+ .udc_is_connected = udc_is_connected,
+ .udc_command = udc_enable,
+};
+
+/*********************************************************
+ * Keypad
+ *********************************************************/
+
+static struct pxa27x_keyboard_platform_data palmt700wx_kbd_data = {
+ .nr_rows = 8,
+ .nr_cols = 7,
+ .keycodes = {
+ { /* row 0 */
+ KEY_O, // "O"
+ KEY_LEFT, // "5-Way Left" },
+ KEY_RIGHTSHIFT, // "Alternate" },
+ KEY_L, // "L" },
+ KEY_A, // "A" },
+ KEY_Q, // "Q" },
+ KEY_RIGHTCTRL, // "Right Shift" },
+ }, { /* row 1 */
+ KEY_P, // "P" },
+ KEY_RIGHT, // "5-Way Right" },
+ KEY_LEFTSHIFT, //"Left Shift" },
+ KEY_Z, // "Z" },
+ KEY_S, // "S" },
+ KEY_W, // "W" },
+ -1, // "Unused" },
+ }, { /* row 2 */
+ KEY_F1, // "Phone" },
+ KEY_UP, // "5-Way Up" },
+ KEY_0, // "0" },
+ KEY_X, // "X" },
+ KEY_D, // "D" },
+ KEY_E, // "E" },
+ -1, // "Unused" },
+ }, { /* row 3 */
+ KEY_F2, // "Calendar" },
+ KEY_DOWN, // "5-Way Down" },
+ KEY_SPACE, // "Space" },
+ KEY_C, // "C" },
+ KEY_F, // "F" },
+ KEY_R, // "R" },
+ -1, // "Unused" },
+ }, { /* row 4 */
+ KEY_F3, // "Mail" },
+ KEY_SELECT, // "5-Way Center" },
+ KEY_HOME, // "Unused" },
+ KEY_V, // "V" },
+ KEY_G, // "G" },
+ KEY_T, // "T" },
+ -1, // "Unused" },
+ }, { /* row 5 */
+ KEY_F4, // "Off" },
+ KEY_VOLUMEUP, // "Volume Up" },
+ KEY_DOT, // "." },
+ KEY_B, // "B" },
+ KEY_H, // "H" },
+ KEY_Y, // "Y" },
+ -1, // "Unused" },
+ }, { /* row 6 */
+ KEY_F5, // "Mute" },
+ KEY_VOLUMEDOWN, // "Volume Down" },
+ KEY_KPENTER, // "Return" },
+ KEY_N, // "N" },
+ KEY_J, // "J" },
+ KEY_U, // "U" },
+ -1, // "Unused" },
+ }, { /* row 7 */
+ KEY_RIGHTALT, // "Alt" },
+ KEY_MENU, // "Unused" },
+ KEY_BACKSPACE, // "P" },
+ KEY_M, // "M"
+ KEY_K, // "K"
+ KEY_I, // "I"
+ -1, // "Unused" },
+ },
+
+ },
+ .gpio_modes = {
+ GPIO_NR_PALMT650_KP_MKIN0_MD,
+ GPIO_NR_PALMT650_KP_MKIN1_MD,
+ GPIO_NR_PALMT650_KP_MKIN2_MD,
+ GPIO_NR_PALMT650_KP_MKIN3_MD,
+ GPIO_NR_PALMT650_KP_MKIN4_MD,
+ GPIO_NR_PALMT650_KP_MKIN5_MD,
+ GPIO_NR_PALMT650_KP_MKIN6_MD,
+ GPIO_NR_PALMT650_KP_MKIN7_MD,
+ GPIO_NR_PALMT650_KP_MKOUT0_MD,
+ GPIO_NR_PALMT650_KP_MKOUT1_MD,
+ GPIO_NR_PALMT650_KP_MKOUT2_MD,
+ GPIO_NR_PALMT650_KP_MKOUT3_MD,
+ GPIO_NR_PALMT650_KP_MKOUT4_MD,
+ GPIO_NR_PALMT650_KP_MKOUT5_MD,
+ GPIO_NR_PALMT650_KP_MKOUT6_MD,
+ },
+};
+
+static struct platform_device palmt700wx_kbd = {
+ .name = "pxa27x-keyboard",
+ .dev = {
+ .platform_data = &palmt700wx_kbd_data,
+ },
+};
+
+
+
+static struct platform_device *devices[] __initdata = {
+ &palmt700wx_kbd, &palmt700wx_ac97, &palmt700wx_bl,
+ &palmt700wx_led,
+};
+
+/*********************************************************
+ * LCD
+ *********************************************************/
+
+/* when we upgrade to 2.6.19+ remote OLDLCD */
+#define OLDLCD
+#ifndef OLDLCD
+static struct pxafb_mode_info palmt700wx_lcd_mode __initdata = {
+ /* pixclock is set by lccr3 below */
+ .pixclock = 50000,
+ .xres = 320,
+ .yres = 320,
+ .bpp = 16,
+ .hsync_len = 4,
+ .vsync_len = 1,
+
+ /* fixme: these are the margins PalmOS has set,
+ * they seem to work but could be better.
+ */
+ .left_margin = 20,
+ .right_margin = 8,
+ .upper_margin = 8,
+ .lower_margin = 5,
+ .sync = FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
+};
+#endif
+
+static struct pxafb_mach_info palmt700wx_lcd __initdata = {
+ .lccr0 = 0x4000080,
+ .lccr3 = 0x4700003,
+ //.pxafb_backlight_power = palm_backlight_power,
+ //
+ //
+#ifdef OLDLCD
+ /* pixclock is set by lccr3 below */
+ .pixclock = 50000,
+ .xres = 320,
+ .yres = 320,
+ .bpp = 16,
+ .hsync_len = 4,
+ .vsync_len = 1,
+
+ /* fixme: these are the margins PalmOS has set,
+ * they seem to work but could be better.
+ */
+ .left_margin = 20,
+ .right_margin = 8,
+ .upper_margin = 8,
+ .lower_margin = 5,
+ .sync = FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
+#else
+ .num_modes = 1,
+ .modes = &palmt700wx_lcd_mode,
+#endif
+};
+
+static struct map_desc palmt700wx_io_desc[] __initdata = {
+ { /* Devs */
+ .virtual = PALMT650_ASIC6_VIRT,
+ .pfn = __phys_to_pfn(PALMT650_ASIC6_PHYS),
+ .length = PALMT650_ASIC6_SIZE,
+ .type = MT_DEVICE
+ },
+};
+
+static void __init palmt700wx_map_io(void)
+{
+ pxa_map_io();
+ iotable_init(palmt700wx_io_desc, ARRAY_SIZE(palmt700wx_io_desc));
+}
+
+static void __init palmt700wx_init(void)
+{
+ /* Disable PRIRDY interrupt to avoid hanging when loading AC97 */
+ GCR &= ~GCR_PRIRDY_IEN;
+ set_pxa_fb_info(&palmt700wx_lcd);
+ pxa_set_mci_info(&palmt700wx_mci_platform_data);
+ pxa_set_ficp_info(&palmt700wx_ficp_platform_data);
+ pxa_set_udc_info( &palmt700wx_udc_mach_info );
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+#if 0
+ /* configure power switch to resume from standby */
+ PWER |= PWER_GPIO12;
+ PRER |= PWER_GPIO12;
+#endif
+}
+
+MACHINE_START(T700WX, "Palm Treo 700w")
+ .phys_io = 0x40000000,
+ .io_pg_offst = io_p2v(0x40000000),
+ .boot_params = 0xa0000100,
+ .map_io = palmt700wx_map_io,
+ .init_irq = pxa_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = palmt700wx_init,
+MACHINE_END
+
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
