Revision: 1123
http://svn.sourceforge.net/hackndev/?rev=1123&view=rev
Author: sleep_walker
Date: 2007-07-08 13:04:44 -0700 (Sun, 08 Jul 2007)
Log Message:
-----------
palmtt3: forgoten file again :o)
Added Paths:
-----------
linux4palm/linux/trunk/arch/arm/mach-pxa/palmtt3/palmtt3_bt.c
Added: linux4palm/linux/trunk/arch/arm/mach-pxa/palmtt3/palmtt3_bt.c
===================================================================
--- linux4palm/linux/trunk/arch/arm/mach-pxa/palmtt3/palmtt3_bt.c (rev 0)
+++ linux4palm/linux/trunk/arch/arm/mach-pxa/palmtt3/palmtt3_bt.c 2007-07-08 20:04:44 UTC (rev 1123)
@@ -0,0 +1,48 @@
+/* arch/arm/mach-pxa/palmtt3/palmtt3_bt.c
+ *
+ * Palm Tungsten|T3 bluetooth driver
+ *
+ * copied from palmz72.c and changed bit
+ *
+ * Tomas Cech <Tom...@ma...>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <asm/arch/palmtt3-gpio.h>
+#include <asm/arch/tps65010.h>
+#include <linux/platform_device.h>
+#include <asm/arch/serial.h>
+
+
+void bcm2035_bt_reset(int on)
+{
+ printk(KERN_NOTICE "Switch BT reset %d\n", on);
+ if (on)
+ SET_GPIO(GPIO_NR_PALMTT3_RESET, 1);
+ else
+ SET_GPIO(GPIO_NR_PALMTT3_RESET, 0 );
+}
+EXPORT_SYMBOL(bcm2035_bt_reset);
+
+
+void bcm2035_bt_power(int on)
+{
+ printk(KERN_NOTICE "Switch BT power %d\n", on);
+ if (on)
+ tps65010_set_gpio_out_value(GPIO_NR_PALMTT3_TPS65010_BT_POWER,1);
+ else
+ tps65010_set_gpio_out_value(GPIO_NR_PALMTT3_TPS65010_BT_POWER,0);
+}
+EXPORT_SYMBOL(bcm2035_bt_power);
+
+
+/*
+static struct platform_pxa_serial_funcs bcm2035_pxa_bt_funcs = {
+ .configure = bcm2035_bt_configure,
+};
+EXPORT_SYMBOL(bcm2035_pxa_bt_funcs);
+*/
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Tomas Cech <Tom...@ma...>");
+MODULE_DESCRIPTION("Palm T|T3 bluetooth driver");
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
