Revision: 943
http://svn.sourceforge.net/hackndev/?rev=943&view=rev
Author: z72ka
Date: 2007-03-28 11:32:04 -0700 (Wed, 28 Mar 2007)
Log Message:
-----------
palmtx: finalize suspend and resume - added powering off/on LCD and BL, USB
Modified Paths:
--------------
linux4palm/linux/trunk/arch/arm/mach-pxa/palmtx/palmtx_pm.c
Modified: linux4palm/linux/trunk/arch/arm/mach-pxa/palmtx/palmtx_pm.c
===================================================================
--- linux4palm/linux/trunk/arch/arm/mach-pxa/palmtx/palmtx_pm.c 2007-03-28 18:29:58 UTC (rev 942)
+++ linux4palm/linux/trunk/arch/arm/mach-pxa/palmtx/palmtx_pm.c 2007-03-28 18:32:04 UTC (rev 943)
@@ -49,11 +49,11 @@
{}
/* Turn off LCD power */
- //SET_PALMZ72_GPIO(LCD_POWER,0);
+ SET_PALMTX_GPIO(LCD_POWER,0);
/* Turn screen off */
- //SET_PALMZ72_GPIO(SCREEN,0);
+ SET_PALMTX_GPIO(BL_POWER,0);
/* Turn off USB power */
- //SET_PALMZ72_GPIO(USB_POWER,0);
+ SET_PALMTX_GPIO(USB_POWER,0);
/* disable GPIO reset - DO NOT REMOVE! */
@@ -75,11 +75,11 @@
/* Here are all of special to resume Palm TX */
/* Turn on LCD power */
- //SET_PALMZ72_GPIO(LCD_POWER,1);
+ SET_PALMTX_GPIO(LCD_POWER,1);
/* Turn screen on */
- //SET_PALMZ72_GPIO(SCREEN,1);
+ SET_PALMTX_GPIO(BL_POWER,1);
/* Turn on USB power */
- //SET_PALMZ72_GPIO(USB_POWER,1);
+ SET_PALMTX_GPIO(USB_POWER,1);
return 0;
}
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
