Menu
▾
▴
Re: [Gusdev-gusdev] Error with WDK (fwd)
|
From: Steve F. <st...@pc...> - 2004-02-03 02:00:27
|
michael- how about sending your servlet-config file. also, i think i see an error in your url: http://tcruzidb-gusdev.ctegd.uga.edu/servlets/?page=query&showForm=1&query=locuslinkID you are missing a 'servlet' before the '?' steve MICHAEL LUCHTAN wrote: >Michael Luchtan >http://www.cs.uga.edu/~luchtan > > >---------- Forwarded message ---------- >Date: Thu, 29 Jan 2004 16:44:31 -0500 (EST) >From: MICHAEL LUCHTAN <lu...@at...> >To: gus...@li... >Subject: Error with WDK > >Hello All- >Since the list has been quite for a couple of days, I will go ahead and >ask a question with regard to the (unsupported) WDK. >This is my first go 'round with tomcat-apache-mod_jk, but I believe that I >have it set up correctly. I will give you my set-up: >Apache 1.3 >Tomcat 4 >workers.properties: > > worker.list=wrkr > worker.wrkr.port=8009 > worker.wrkr.host=tcruzidb-gusdev.ctegd.uga.edu > >server.xml(attached) > >$CATALINA_HOME/webapps/tcruzidb-gusdev/WEB-INF/web.xml (attached) > >relevant tcruzidb-gusdev.conf for apache: > JkMount /*.jsp wrkr > JkMount /servlets/* wrkr > >relevant httpd.conf: > JkWorkersFile "/usr/local/tomcat/conf/jk/workers.properties" > JkLogFile "/usr/local/tomcat/logs/mod_jk.log" > JkLogLevel debug > JkLogStampFormat "[%a %b %d %H:%M:%S %Y]" > >servlet.log: > > [Jan 29, 2004 2:59:07 PM] <ConnectionPool:MSG> An instance of > oracle.jdbc.driver.OracleDriver has already been registered. > [Jan 29, 2004 2:59:07 PM] <ConnectionPool:MSG> Opened JDBC connection 0 to > jdbc:oracle:thin:@kiwi.rcr.uga.edu:1521:CTEGD > [Jan 29, 2004 2:59:07 PM] <ConnectionPool:MSG> Opened JDBC connection 1 to > jdbc:oracle:thin:@kiwi.rcr.uga.edu:1521:CTEGD > [Jan 29, 2004 2:59:07 PM] <ConnectionPool:MSG> Opened JDBC connection 2 to > jdbc:oracle:thin:@kiwi.rcr.uga.edu:1521:CTEGD > [Jan 29, 2004 2:59:08 PM] <ConnectionPool:MSG> Opened JDBC connection 3 to > jdbc:oracle:thin:@kiwi.rcr.uga.edu:1521:CTEGD > [Jan 29, 2004 2:59:08 PM] <ConnectionPool:MSG> Opened JDBC connection 4 to > jdbc:oracle:thin:@kiwi.rcr.uga.edu:1521:CTEGD > [Jan 29, 2004 2:59:08 PM] <ConnectionPool:MSG> Opened JDBC connection 5 to > jdbc:oracle:thin:@kiwi.rcr.uga.edu:1521:CTEGD > [Jan 29, 2004 2:59:08 PM] <ConnectionPool:MSG> Opened JDBC connection 6 to > jdbc:oracle:thin:@kiwi.rcr.uga.edu:1521:CTEGD > [Jan 29, 2004 2:59:08 PM] <ConnectionPool:MSG> Opened JDBC connection 7 to > jdbc:oracle:thin:@kiwi.rcr.uga.edu:1521:CTEGD > [Jan 29, 2004 2:59:19 PM] <ProcessPool-seqAlignment-0:MSG> Init > [Jan 29, 2004 2:59:20 PM] <ProcessPool-seqAlignment-1:MSG> Init > [Jan 29, 2004 2:59:20 PM] <ProcessPool-seqAlignment-2:MSG> Init > [Jan 29, 2004 2:59:20 PM] <ProcessPool-seqAlignment:MSG> initialized 3 > processes > [Jan 29, 2004 2:59:21 PM] <ProcessPool-Motifs(G)-0:MSG> Init > [Jan 29, 2004 2:59:22 PM] <ProcessPool-Motifs(G)-1:MSG> Init > [Jan 29, 2004 2:59:22 PM] <ProcessPool-Motifs(G)-2:MSG> Init > [Jan 29, 2004 2:59:22 PM] <ProcessPool-Motifs(G):MSG> initialized 3 > processes > [Jan 29, 2004 2:59:23 PM] <ProcessPool-NRDB(G)-0:MSG> Init > [Jan 29, 2004 2:59:23 PM] <ProcessPool-NRDB(G)-1:MSG> Init > [Jan 29, 2004 2:59:24 PM] <ProcessPool-NRDB(G)-2:MSG> Init > [Jan 29, 2004 2:59:24 PM] <ProcessPool-NRDB(G):MSG> initialized 3 > processes > [Jan 29, 2004 2:59:25 PM] <ProcessPool-BLAT search-0:MSG> Init > [Jan 29, 2004 2:59:25 PM] <ProcessPool-BLAT search-1:MSG> Init > [Jan 29, 2004 2:59:25 PM] <ProcessPool-BLAT search:MSG> initialized 2 > processes > [Jan 29, 2004 2:59:27 PM] <ProcessPool-Assembly(G)-0:MSG> Init > [Jan 29, 2004 2:59:27 PM] <ProcessPool-Assembly(G)-1:MSG> Init > [Jan 29, 2004 2:59:28 PM] <ProcessPool-Assembly(G)-2:MSG> Init > [Jan 29, 2004 2:59:29 PM] <ProcessPool-Assembly(G)-3:MSG> Init > [Jan 29, 2004 2:59:29 PM] <ProcessPool-Assembly(G)-4:MSG> Init > [Jan 29, 2004 2:59:29 PM] <ProcessPool-Assembly(G):MSG> initialized 5 > processes > [Jan 29, 2004 2:59:30 PM] <ProcessPool-Features(G)-0:MSG> Init > [Jan 29, 2004 2:59:31 PM] <ProcessPool-Features(G)-1:MSG> Init > [Jan 29, 2004 2:59:31 PM] <ProcessPool-Features(G)-2:MSG> Init > [Jan 29, 2004 2:59:32 PM] <ProcessPool-Features(G)-3:MSG> Init > [Jan 29, 2004 2:59:32 PM] <ProcessPool-Features(G)-4:MSG> Init > [Jan 29, 2004 2:59:32 PM] <ProcessPool-Features(G):MSG> > initialized 5 processes > [Jan 29, 2004 2:59:34 PM] <ObjectFile:ERROR> No value provided for > mandatory property gene.DefaultTaxonId > [Jan 29, 2004 2:59:35 PM] <ObjectFile:ERROR> Could not determine class for > dummyF > [Jan 29, 2004 2:59:36 PM] <ProcessPool-sequence-0:MSG> Init > [Jan 29, 2004 2:59:37 PM] <ProcessPool-sequence-1:MSG> Init > [Jan 29, 2004 2:59:37 PM] <ProcessPool-sequence:MSG> initialized 2 > processes > [Jan 29, 2004 2:59:38 PM] <SiteServlet:MSG> init() completed > [Jan 29, 2004 2:59:38 PM] <SiteServlet:MSG> debug = true > > > >I did an install of the WDK, just using the dotsgenes pages, but when I >try to follow a link for a server, for example for the URL: >http://tcruzidb-gusdev.ctegd.uga.edu/servlets/?page=query&showForm=1&query=locuslinkID >I get the following message: > >Apache Tomcat/4.0.6 - HTTP Status 404 - /servlets/ > >type Status report > >message /servlets/ > >description The requested resource (/servlets/) is not available. > > >What confuses me a little is that the URL does not request an obvious >servlet. When looking at tomcat examples, the URL will reflect the name >of the servlet, and one can easily find the corresponding class file. >The contents of the servlets directory: > servlets]# ls -l >total 600 >-rwxr-xr-x 1 tomcat tomcat 433964 Jan 29 14:33 gus-servlet.jar >drwxr-xr-x 2 tomcat tomcat 4096 Jan 29 14:33 scripts >-rwxr-xr-x 1 tomcat tomcat 161084 Jan 29 14:33 servlet-config >-rwxr-xr-x 1 tomcat tomcat 3378 Jan 29 14:59 servlet.log >and the scripts: > servlets]# ls scripts/ -l >total 36 >-rwxr-xr-x 1 tomcat tomcat 199 Jan 29 14:33 README >-rwxr-xr-x 1 tomcat tomcat 1375 Jan 29 14:33 assemblyCAP2.pl >-rwxr-xr-x 1 tomcat tomcat 1142 Jan 29 14:33 assemblyGraphic.pl >-rwxr-xr-x 1 tomcat tomcat 4463 Jan 29 14:33 blatLink.pl >-rwxr-xr-x 1 tomcat tomcat 1632 Jan 29 14:33 naSeq.pl >-rwxr-xr-x 1 tomcat tomcat 1166 Jan 29 14:33 proteinGraphic.pl >-rwxr-xr-x 1 tomcat tomcat 1159 Jan 29 14:33 rnaMotifs.pl >-rwxr-xr-x 1 tomcat tomcat 1096 Jan 29 14:33 rnaProtSim.pl > > >I know that this e-mail is all over the place, but I'm not sure where the >problem lies and wanted to make sure that everyone had any necessary >information. >Can anyone give me some tips? > > > >Michael Luchtan >http://www.cs.uga.edu/~luchtan > > > >------------------------------------------------------------------------ > ><!-- Example Server Configuration File --> ><!-- Note that component elements are nested corresponding to their > parent-child relationships with each other --> > ><!-- A "Server" is a singleton element that represents the entire JVM, > which may contain one or more "Service" instances. The Server > listens for a shutdown command on the indicated port. > > Note: A "Server" is not itself a "Container", so you may not > define subcomponents such as "Valves" or "Loggers" at this level. > --> > ><Server port="8005" shutdown="SHUTDOWN" debug="0"> > > > <!-- A "Service" is a collection of one or more "Connectors" that share > a single "Container" (and therefore the web applications visible > within that Container). Normally, that Container is an "Engine", > but this is not required. > > Note: A "Service" is not itself a "Container", so you may not > define subcomponents such as "Valves" or "Loggers" at this level. > --> > > <!-- Define the Tomcat Stand-Alone Service --> > <Service name="Tomcat-Standalone"> > > <!-- A "Connector" represents an endpoint by which requests are received > and responses are returned. Each Connector passes requests on to the > associated "Container" (normally an Engine) for processing. > > By default, a non-SSL HTTP/1.1 Connector is established on port 8080. > You can also enable an SSL HTTP/1.1 Connector on port 8443 by > following the instructions below and uncommenting the second Connector > entry. SSL support requires the following steps (see the SSL Config > HOWTO in the Tomcat 4.0 documentation bundle for more detailed > instructions): > * Download and install JSSE 1.0.2 or later, and put the JAR files > into "$JAVA_HOME/jre/lib/ext". > * Execute: > %JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows) > $JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix) > with a password value of "changeit" for both the certificate and > the keystore itself. > > By default, DNS lookups are enabled when a web application calls > request.getRemoteHost(). This can have an adverse impact on > performance, so you can disable it by setting the > "enableLookups" attribute to "false". When DNS lookups are disabled, > request.getRemoteHost() will return the String version of the > IP address of the remote client. > --> > > <!-- Define a non-SSL HTTP/1.1 Connector on port 8080 --> > <Connector className="org.apache.catalina.connector.http.HttpConnector" > port="8080" minProcessors="5" maxProcessors="75" > enableLookups="true" redirectPort="8443" > acceptCount="10" debug="0" connectionTimeout="60000"/> > <!-- Note : To disable connection timeouts, set connectionTimeout value > to -1 --> > > <!-- Define a non-SSL Coyote HTTP/1.1 Connector on port 8081 --> > <!-- > <Connector className="org.apache.coyote.tomcat4.CoyoteConnector" > port="8081" minProcessors="5" maxProcessors="75" > enableLookups="true" redirectPort="8443" > acceptCount="10" debug="0" connectionTimeout="20000"/> > --> > > <!-- Define an SSL HTTP/1.1 Connector on port 8443 --> > <!-- > <Connector className="org.apache.catalina.connector.http.HttpConnector" > port="8443" minProcessors="5" maxProcessors="75" > enableLookups="true" > acceptCount="10" debug="0" scheme="https" secure="true"> > <Factory className="org.apache.catalina.net.SSLServerSocketFactory" > clientAuth="false" protocol="TLS"/> > </Connector> > --> > > <!-- Define an AJP 1.3 Connector on port 8009 --> > <Connector className="org.apache.ajp.tomcat4.Ajp13Connector" > port="8009" minProcessors="5" maxProcessors="75" > acceptCount="10" debug="0"/> > > <!-- Define a Proxied HTTP/1.1 Connector on port 8081 --> > <!-- See proxy documentation for more information about using this. --> > <!-- > <Connector className="org.apache.catalina.connector.http.HttpConnector" > port="8082" minProcessors="5" maxProcessors="75" > enableLookups="true" > acceptCount="10" debug="0" connectionTimeout="60000" > proxyPort="80"/> > --> > > <!-- Define a non-SSL HTTP/1.0 Test Connector on port 8082 --> > <!-- > <Connector className="org.apache.catalina.connector.http10.HttpConnector" > port="8083" minProcessors="5" maxProcessors="75" > enableLookups="true" redirectPort="8443" > acceptCount="10" debug="0"/> > --> > > <!-- An Engine represents the entry point (within Catalina) that processes > every request. The Engine implementation for Tomcat stand alone > analyzes the HTTP headers included with the request, and passes them > on to the appropriate Host (virtual host). --> > > <!-- Define the top level container in our container hierarchy --> > <Engine name="Standalone" defaultHost="localhost" debug="0"> > > <!-- The request dumper valve dumps useful debugging information about > the request headers and cookies that were received, and the response > headers and cookies that were sent, for all requests received by > this instance of Tomcat. If you care only about requests to a > particular virtual host, or a particular application, nest this > element inside the corresponding <Host> or <Context> entry instead. > > For a similar mechanism that is portable to all Servlet 2.3 > containers, check out the "RequestDumperFilter" Filter in the > example application (the source for this filter may be found in > "$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters"). > > Request dumping is disabled by default. Uncomment the following > element to enable it. --> > <!-- > <Valve className="org.apache.catalina.valves.RequestDumperValve"/> > --> > > <!-- Global logger unless overridden at lower levels --> > <Logger className="org.apache.catalina.logger.FileLogger" > prefix="catalina_log." suffix=".txt" > timestamp="true"/> > > <!-- Because this Realm is here, an instance will be shared globally --> > > <Realm className="org.apache.catalina.realm.MemoryRealm" /> > > <!-- Replace the above Realm with one of the following to get a Realm > stored in a database and accessed via JDBC --> > > <!-- > <Realm className="org.apache.catalina.realm.JDBCRealm" debug="99" > driverName="org.gjt.mm.mysql.Driver" > connectionURL="jdbc:mysql://localhost/authority?user=test;password=test" > userTable="users" userNameCol="user_name" userCredCol="user_pass" > userRoleTable="user_roles" roleNameCol="role_name" /> > --> > > <!-- > <Realm className="org.apache.catalina.realm.JDBCRealm" debug="99" > driverName="oracle.jdbc.driver.OracleDriver" > connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL?user=scott;password=tiger" > userTable="users" userNameCol="user_name" userCredCol="user_pass" > userRoleTable="user_roles" roleNameCol="role_name" /> > --> > > <!-- > <Realm className="org.apache.catalina.realm.JDBCRealm" debug="99" > driverName="sun.jdbc.odbc.JdbcOdbcDriver" > connectionURL="jdbc:odbc:CATALINA" > userTable="users" userNameCol="user_name" userCredCol="user_pass" > userRoleTable="user_roles" roleNameCol="role_name" /> > --> > > <!-- Define the default virtual host --> > <Host name="localhost" debug="0" appBase="webapps" unpackWARs="true"> > > <!-- Normally, users must authenticate themselves to each web app > individually. Uncomment the following entry if you would like > a user to be authenticated the first time they encounter a > resource protected by a security constraint, and then have that > user identity maintained across *all* web applications contained > in this virtual host. --> > <!-- > <Valve className="org.apache.catalina.authenticator.SingleSignOn" > debug="0"/> > --> > > <!-- Access log processes all requests for this virtual host. By > default, log files are created in the "logs" directory relative to > $CATALINA_HOME. If you wish, you can specify a different > directory with the "directory" attribute. Specify either a relative > (to $CATALINA_HOME) or absolute path to the desired directory. > --> > <Valve className="org.apache.catalina.valves.AccessLogValve" > directory="logs" prefix="localhost_access_log." suffix=".txt" > pattern="common"/> > > <!-- Logger shared by all Contexts related to this virtual host. By > default (when using FileLogger), log files are created in the "logs" > directory relative to $CATALINA_HOME. If you wish, you can specify > a different directory with the "directory" attribute. Specify either a > relative (to $CATALINA_HOME) or absolute path to the desired > directory.--> > <Logger className="org.apache.catalina.logger.FileLogger" > directory="logs" prefix="localhost_log." suffix=".txt" > timestamp="true"/> > > <!-- Define properties for each web application. This is only needed > if you want to set non-default properties, or have web application > document roots in places other than the virtual host's appBase > directory. --> > > <!-- Tomcat Root Context --> > <!-- > <Context path="" docBase="ROOT" debug="0"/> > --> > > <!-- Tomcat Manager Context --> > <Context path="/manager" docBase="manager" > debug="0" privileged="true"/> > > <!-- Tomcat Examples Context --> > <Context path="/examples" docBase="examples" debug="0" > reloadable="true" crossContext="true"> > <Logger className="org.apache.catalina.logger.FileLogger" > prefix="localhost_examples_log." suffix=".txt" > timestamp="true"/> > <Ejb name="ejb/EmplRecord" type="Entity" > home="com.wombat.empl.EmployeeRecordHome" > remote="com.wombat.empl.EmployeeRecord"/> > <!-- PersistentManager: Uncomment the section below to test Persistent > Sessions. > > saveOnRestart: If true, all active sessions will be saved > to the Store when Catalina is shutdown, regardless of > other settings. All Sessions found in the Store will be > loaded on startup. Sessions past their expiration are > ignored in both cases. > maxActiveSessions: If 0 or greater, having too many active > sessions will result in some being swapped out. minIdleSwap > limits this. -1 means unlimited sessions are allowed. > 0 means sessions will almost always be swapped out after > use - this will be noticeably slow for your users. > minIdleSwap: Sessions must be idle for at least this long > (in seconds) before they will be swapped out due to > maxActiveSessions. This avoids thrashing when the site is > highly active. -1 or 0 means there is no minimum - sessions > can be swapped out at any time. > maxIdleSwap: Sessions will be swapped out if idle for this > long (in seconds). If minIdleSwap is higher, then it will > override this. This isn't exact: it is checked periodically. > -1 means sessions won't be swapped out for this reason, > although they may be swapped out for maxActiveSessions. > If set to >= 0, guarantees that all sessions found in the > Store will be loaded on startup. > maxIdleBackup: Sessions will be backed up (saved to the Store, > but left in active memory) if idle for this long (in seconds), > and all sessions found in the Store will be loaded on startup. > If set to -1 sessions will not be backed up, 0 means they > should be backed up shortly after being used. > > To clear sessions from the Store, set maxActiveSessions, maxIdleSwap, > and minIdleBackup all to -1, saveOnRestart to false, then restart > Catalina. > --> > <!-- > <Manager className="org.apache.catalina.session.PersistentManager" > debug="0" > saveOnRestart="true" > maxActiveSessions="-1" > minIdleSwap="-1" > maxIdleSwap="-1" > maxIdleBackup="-1"> > <Store className="org.apache.catalina.session.FileStore"/> > </Manager> > --> > <Environment name="maxExemptions" type="java.lang.Integer" > value="15"/> > <Parameter name="context.param.name" value="context.param.value" > override="false"/> > <Resource name="jdbc/EmployeeAppDb" auth="SERVLET" > type="javax.sql.DataSource"/> > <ResourceParams name="jdbc/EmployeeAppDb"> > <parameter><name>user</name><value>sa</value></parameter> > <parameter><name>password</name><value></value></parameter> > <parameter><name>driverClassName</name> > <value>org.hsql.jdbcDriver</value></parameter> > <parameter><name>driverName</name> > <value>jdbc:HypersonicSQL:database</value></parameter> > </ResourceParams> > <Resource name="mail/Session" auth="Container" > type="javax.mail.Session"/> > <ResourceParams name="mail/Session"> > <parameter> > <name>mail.smtp.host</name> > <value>localhost</value> > </parameter> > </ResourceParams> > </Context> > > </Host> > > </Engine> > > </Service> > > <!-- The MOD_WEBAPP connector is used to connect Apache 1.3 with Tomcat 4.0 > as its servlet container. Please read the README.txt file coming with > the WebApp Module distribution on how to build it. > (Or check out the "jakarta-tomcat-connectors/webapp" CVS repository) > > To configure the Apache side, you must ensure that you have the > "ServerName" and "Port" directives defined in "httpd.conf". Then, > lines like these to the bottom of your "httpd.conf" file: > > LoadModule webapp_module libexec/mod_webapp.so > WebAppConnection warpConnection warp localhost:8008 > WebAppDeploy examples warpConnection /examples/ > > The next time you restart Apache (after restarting Tomcat, if needed) > the connection will be established, and all applications you make > visible via "WebAppDeploy" directives can be accessed through Apache. > --> > > <!-- Define an Apache-Connector Service --> > <Service name="Tomcat-Apache"> > > <Connector className="org.apache.catalina.connector.warp.WarpConnector" > port="8008" minProcessors="5" maxProcessors="75" > enableLookups="true" appBase="webapps" > acceptCount="10" debug="0"/> > > <!-- Replace "localhost" with what your Apache "ServerName" is set to --> > <Engine className="org.apache.catalina.connector.warp.WarpEngine" > name="Apache" debug="0"> > > <!-- Global logger unless overridden at lower levels --> > <Logger className="org.apache.catalina.logger.FileLogger" > prefix="apache_log." suffix=".txt" > timestamp="true"/> > > <!-- Because this Realm is here, an instance will be shared globally --> > <Realm className="org.apache.catalina.realm.MemoryRealm" /> > > </Engine> > ><ApacheConfig /> > > </Service> > ></Server> > > >------------------------------------------------------------------------ > ><?xml version="1.0" encoding="ISO-8859-1"?> > ><!-- A sample "web.xml" file for Tomcat; this file should be copied to --> ><!-- $CATALINA_HOME/webapps/$servletName/WEB-INF/web.xml --> ><!-- (where $CATALINA_HOME is the directory in which Tomcat is installed --> ><!-- and $servletName is the name of your servlet in Tomcat.) It should --> ><!-- then be edited to reflect the correct configuration for the servlet --> ><!-- that you are installing. --> > ><!DOCTYPE web-app > PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" > "http://java.sun.com/dtd/web-app_2_3.dtd"> > ><web-app> > > <display-name>tcruzidb-gusdev</display-name> > <description> > The development servlet/web site for Dotsgenes. > </description> > > > <filter> > <filter-name>multipartFilter</filter-name> > <filter-class>com.oreilly.servlet.MultipartFilter</filter-class> > <init-param> > <param-name>uploadDir</param-name> > <param-value>/tmp/tcruzidb-gusdev</param-value> > </init-param> > </filter> > > <filter-mapping> > <filter-name>multipartFilter</filter-name> > <url-pattern>/*</url-pattern> > </filter-mapping> > <!-- Definition for the single servlet in our system --> > > <servlet> > <servlet-name>tcruzidb-gusdev</servlet-name> > <description>The main (and only) Java servlet for the Dotsgenes-dev web site.</description> > <servlet-class>cbil.gus.servlet.SiteServlet</servlet-class> > > <!-- The URL where cbil.gus.servlet.SiteServlet can find itself --> > <init-param> > <param-name>siteServletURL</param-name> > <param-value>http://tcruzidb-gusdev.ctegd.uga.edu/servlets</param-value> > </init-param> > > <!-- The location of the servlet configuration file for the SiteServlet --> > <!-- (it should be in the directory specfied for $installDir in the servlet --> > <!-- install script.) --> > <init-param> > <param-name>configFile</param-name> > <param-value>/var/www/tcruzidb-gusdev/servlets/servlet-config</param-value> > </init-param> > > <!-- Location of the servlet log file --> > <init-param> > <param-name>logFile</param-name> > <param-value>/var/www/tcruzidb-gusdev/servlets/servlet.log</param-value> > </init-param> > > <!-- Whether to enable verbose logging/debugging messages --> > <init-param> > <param-name>debug</param-name> > <param-value>true</param-value> > </init-param> > > <!-- Whether to load this servlet when Tomcat starts --> > <load-on-startup>1</load-on-startup> > > </servlet> > > <!-- Set the default session timeout to 2 hours; this value can be modified for individual --> > <!-- sessions in the servlet itself. --> > > <session-config> > <session-timeout>120</session-timeout> > </session-config> > ></web-app> > > |
