From: AKS <aun...@gm...> - 2011-12-16 13:34:35
|
When you say '"1) application is usb bus powered"' do you mean that the system will boot from the current sourced from USB hub? For your wish list, '"3) running and embedded webserver"' is surely possible, for sure. But I do not know much about second pt though. Good luck! On 12/16/11, Tom Verdonck <tom...@tv...> wrote: > Hello, > > Question from a potential Gumstix developer... > > Is possible to create an application using a Gumstix Overo Earth COM + > Thumbo > expansion board with the following specs/requirements: > > 1) application is usb bus powered > 2) uses USB gadget ethernet providing RNDIS interface for Windows (or > CDC/ethernet + existing driver for windows, if it works) > 3) running and embedded webserver > > The purspose is to visualize information received from CAN-bus > (CAN-controller on SPI bus) via the embedded webserver over USB (RNDIS). > The PC must power the application via USB ! (no battery, external > power,...) > > All information is welcome... > > Kind regards, > Tom Verdonck > R&D engineer > > **** DISCLAIMER **** > > http://www.tvh.com/newen2/emaildisclaimer/default.html > > "This message is delivered to all addressees subject to the conditions > set forth in the attached disclaimer, which is an integral part of this > message." > |