Re: [Gumstix-users] ADC Problem NEED HELP

[Yuri R. <yu...@re...>]

ghostalker wrote:
> 
> Hi,
> 
> This is what I did recently in order to get the ADC lines on my GPSstix
> board to work.
> 
> Btw, I'm using OE with revision 318, kernel 2.6.21.
> 
> I used the information from this 
> http://www.nabble.com/patch-for-audiostix-UCB1400-ADC-access-via--proc-td15984339.html
> post  to generate the patch file needed.
> 
> I replaced the original ucb1400-ac97-audio.patch file in the
> gumstix.collection folder. 
> 
> Then I disabled the ucb1400_ts feature in the .conf file, if I remember
> correctly.
> 
> After, rebuild everything should be working fine. If I didn't disabled
> ucb1400_ts, I would always be getting zero or wrong readings from the
> lines. 
> 
> Hope it helps
> 
> 
> 

hi ghostalker
i am using absolutly same revision(318) and disame kernel (2.6.21)
is the adc works works on you gumstix? 
if yes can you post a copy of your patch i will try to disable ucb1400_ts
tommorow morning because developer pc is not with me:(
and by disabling do you mean to disable all patch ? or smth specefic i
really apriaciate your help tnx for asnwer  

-- 
View this message in context: http://www.nabble.com/ADC-Problem-NEED-HELP-tp24566872p24627622.html
Sent from the Gumstix mailing list archive at Nabble.com.