From: Marc H. <mhu...@lo...> - 2008-03-28 13:23:06
|
The first time I powered mine up it was not responding. I then logged in on the regular console port and reran the ts_calibrate utility. After that touch screen worked like a charm. No pullups or mods done to the consoleLCD16-vx. -----Original Message----- From: gum...@li... [mailto:gum...@li...] On Behalf Of Neil Brown Sent: Friday, March 28, 2008 8:28 AM To: General mailing list for gumstix users. Subject: Re: [Gumstix-users] 16bit consolelcd-vx Is everyone who has a ConsoleLCD16 seeing their touchscreen fail to respond without these pullups? I know mine doesn't work. -o- Neil David Vescovi wrote: > Marq Rasmussen <marq84004 <at> yahoo.com> writes: > > >> Does this board fix a lot of the problems that people were having with the 18 >> bit version? >> >> > > Looks like the ConsoleLCD16 fixed the problem with the not connected touch > interrupt line. > I have a brand new ConsoleLCD16 board that will not commuicate with the touch > controller chip. (even tho it has a QA stamp on it) > > There are no pullups on the I2C SDA and SCL lines. > > I added 20k pullups to these two lines and it started working. > The PXA270 has very weak pullups when GPIO configured as input. > This seems to be marginal at best. Definitely not ideal. > > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ gumstix-users mailing list gum...@li... https://lists.sourceforge.net/lists/listinfo/gumstix-users |