Re: [Gumstix-users] i2c gumstix

[Pablo M. <pma...@gm...>]

Dave, I'm not using a tsc2003. I only have the ads7828 on the bus and may be
another chip inside the verdex.
At the moment is really difficult to me to change the connection of A0 and
A1, Is there another thing to try?

Thanks,
Pablo
2008/2/11, Dave Hylands <dhy...@gm...>:
>
> Hi Pablo,
>
> On Feb 11, 2008 5:01 PM, Pablo Massaferro <pma...@gm...> wrote:
> > Steve, on the datasheet
> >
> > http://www.ti.com/lit/gpn/ads7828 http://www.ti.com/lit/gpn/ads7828
> >  says ADDRESS BYTE  1 0 0 1 0 A1 A0 R/W and I connected A1 and A0 to
> GND.
> > The LSB define the operation.
> > It's ok?
>
> You'll have to use A0/A1 not equal to 0 0 in order to not have 2
> devices on the i2c bus with the same address.
>
> --
> Dave Hylands
> Vancouver, BC, Canada
> http://www.DaveHylands.com/
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> gumstix-users mailing list
> gum...@li...
> https://lists.sourceforge.net/lists/listinfo/gumstix-users
>