From: opher <op...@to...> - 2008-01-13 09:23:13
|
Hi Dave I have switched only the CPU board and left the netCF and console the same. Opher Dave Hylands wrote: > > Hi Opher, > >> I have 2 gumstix verdex MX4 one is working without any problem, while the >> other system doesn't recognize the ethernet port. I have tried in the >> boot >> stage and the same problem. the output of the system is attached at the >> end. >> how do I send this unit for repair? > > First, mark (with a piece of tape) the ethernet card that's bad. Then > try swapping the network boards and motherboards. > > If the problem moves with the board, then you definitely have a bad board. > > -- > Dave Hylands > Vancouver, BC, Canada > http://www.DaveHylands.com/ > > ------------------------------------------------------------------------- > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > -- View this message in context: http://www.nabble.com/ethernet-problem-on-verdex-400-tp14783265p14783645.html Sent from the Gumstix mailing list archive at Nabble.com. |