Menu
▾
▴
Re: [Gumstix-users] OE - WiFiStix issues ?
|
From: Steve S. <sa...@gm...> - 2008-01-10 05:28:11
|
Yuvraj, Nothing obvious jumps out at me from the boot log. What type of wireless network do you have set up, Open, WEP, WPA? I'll try to duplicate this here. Steve On Jan 9, 2008 9:03 PM, Yuvraj Agarwal <yu...@uc...> wrote: > I actually did even better. I flashed my image again and am sending the boot > log for the first startup. > Now the problem is slightly different. After first bootup when I did > "iwconfig" it just hangs there doing > nothing. > > root@gumstix-custom-connex:~$ ifconfig > lo Link encap:Local Loopback > inet addr:127.0.0.1 Mask:255.0.0.0 > UP LOOPBACK RUNNING MTU:16436 Metric:1 > RX packets:11 errors:0 dropped:0 overruns:0 frame:0 > TX packets:11 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:3925 (3.8 KiB) TX bytes:3925 (3.8 KiB) > > root@gumstix-custom-connex:~$ iwconfig > lo no wireless extensions. > > > root@gumstix-custom-connex:~$ > > *********************************************************************** > First bootup log after flashing new OE image > *********************************************************************** > > GUM> bootm > ## Booting image at a2000000 ... > Image Name: Angstrom/2.6.21/gumstix-custom-c > Image Type: ARM Linux Kernel Image (uncompressed) > Data Size: 929764 Bytes = 908 kB > Load Address: a0008000 > Entry Point: a0008000 > OK > > Starting kernel ... > > Linux version 2.6.21 (yuvraj@lowpower) (gcc version 4.1.2) #1 PREEMPT Wed > Jan 9 12:13:09 PST 2008 > CPU: XScale-PXA255 [69052d06] revision 6 (ARMv5TE), cr=0000397f > Machine: The Gumstix Platform > Memory policy: ECC disabled, Data cache writeback > Memory clock: 99.53MHz (*27) > Run Mode clock: 398.13MHz (*4) > Turbo Mode clock: 398.13MHz (*1.0, inactive) > CPU0: D VIVT undefined 5 cache > CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets > CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets > Built 1 zonelists. Total pages: 16256 > Kernel command line: console=ttyS0,115200n8 root=1f01 rootfstype=jffs2 > reboot=cold,hard > PID hash table entries: 256 (order: 8, 1024 bytes) > Console: colour dummy device 80x30 > Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) > Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) > Memory: 64MB = 64MB total > Memory: 62848KB available (1788K code, 180K data, 60K init) > Mount-cache hash table entries: 512 > CPU: Testing write buffer coherency: ok > NET: Registered protocol family 16 > Time: pxa_timer clocksource has been installed. > NET: Registered protocol family 2 > IP route cache hash table entries: 1024 (order: 0, 4096 bytes) > TCP established hash table entries: 2048 (order: 2, 16384 bytes) > TCP bind hash table entries: 2048 (order: 1, 8192 bytes) > TCP: Hash tables configured (established 2048 bind 2048) > TCP reno registered > JFFS2 version 2.2. (NAND) (SUMMARY) (C) 2001-2006 Red Hat, Inc. > io scheduler noop registered > io scheduler cfq registered (default) > pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 15) is a FFUART > pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 14) is a BTUART > pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 13) is a STUART > pxa2xx-uart.3: ttyS3 at MMIO 0x41600000 (irq = 0) is a HWUART > Probing Gumstix Flash ROM at physical address 0x00000000 (16-bit bankwidth) > Gumstix Flash ROM: Found 1 x16 devices at 0x0 in 16-bit bank > Intel/Sharp Extended Query Table at 0x0031 > Using buffer write method > cfi_cmdset_0001: Erase suspend on write enabled > Using static partitions on Gumstix Flash ROM > Creating 3 MTD partitions on "Gumstix Flash ROM": > 0x00000000-0x00040000 : "Bootloader" > 0x00040000-0x00f00000 : "RootFS" > 0x00f00000-0x01000000 : "Kernel" > TCP cubic registered > NET: Registered protocol family 1 > NET: Registered protocol family 17 > XScale DSP coprocessor detected. > VFS: Mounted root (jffs2 filesystem). > Freeing init memory: 60K > Ive > Starting the hotplug events dispatcher udevd > Synthesizing the initial hotplug events > Waiting for /dev to be fully populated > pxa2xx_udc: version 4-May-2005 > Remounting root file system... > root: mount: mount point /dev/pts does not exist > root: mount: mount point /dev/shm does not exist > root: mount: special device /dev/hda1 does not exist > root: mount: special device /dev/mmcblk0p1 does not exist > Setting up IP spoofing protection: rp_filter. > Configuring network interfaces... SIOCGIFFLAGS: No such device > eth0 No such device > > udhcpc (v1.2.1) started > Dec 31 16:04:14 udhcpc[498]: udhcpc (v1.2.1) started > SIOCGIFINDEX failed!: No such device > Dec 31 16:04:14 udhcpc[498]: SIOCGIFINDEX failed!: No such device > cfio: module license 'unspecified' taints kernel. > CPLD responded with: 00 > Before register driver > After register driver > Error for wireless request "Set ESSID" (8B1A) : > SET failed on device wlan0 ; No such device. > Error for wireless request "Set Mode" (8B06) : > SET failed on device wlan0 ; No such device. > SIOCGIFFLAGS: No such device > wlan0 No such device > > udhcpc (v1.2.1) started > Dec 31 16:04:15 udhcpc[552]: udhcpc (v1.2.1) started > SIOCGIFINDEX failed!: No such device > Dec 31 16:04:15 udhcpc[552]: SIOCGIFINDEX failed!: No such device > done. > pccard: PCMCIA card inserted into slot 0 > pcmcia: registering new device pcmcia0.0 > Entering cf_attach() > pcmcia: request for exclusive IRQ could not be fulfilled. > pcmcia: the driver needs updating to supported shared IRQ lines. > BasePort1=0xc4880000, AssignedIRQ=49 > After calling wlan_add_card function > Configuring dbus-1 > Adding system startup for /etc/init.d/dbus-1 ... > /etc/rc2.d/S20dbus-1 -> ../init.d/dbus-1 > /etc/rc3.d/S20dbus-1 -> ../init.d/dbus-1 > /etc/rc4.d/S20dbus-1 -> ../init.d/dbus-1 > /etc/rc5.d/S20dbus-1 -> ../init.d/dbus-1 > /etc/rc0.d/K20dbus-1 -> ../init.d/dbus-1 > /etc/rc1.d/K20dbus-1 -> ../init.d/dbus-1 > /etc/rc6.d/K20dbus-1 -> ../init.d/dbus-1 > Configuring ntpdate > grep: /etc/cron/crontabs/root: No such file or directory > adding crontab > update-rc.d: /etc/init.d/busybox-cron: file does not exist > Adding system startup for /etc/init.d/ntpdate ... > /etc/rc2.d/S30ntpdate -> ../init.d/ntpdate > /etc/rc3.d/S30ntpdate -> ../init.d/ntpdate > /etc/rc4.d/S30ntpdate -> ../init.d/ntpdate > /etc/rc5.d/S30ntpdate -> ../init.d/ntpdate > /etc/rc0.d/K30ntpdate -> ../init.d/ntpdate > /etc/rc1.d/K30ntpdate -> ../init.d/ntpdate > /etc/rc6.d/K30ntpdate -> ../init.d/ntpdate > Configuring update-modules > usb0: Ethernet Gadget, version: May Day 2005 > usb0: using pxa2xx_udc, OUT ep2out-bulk IN ep1in-bulk STATUS ep6in-bulk > usb0: MAC 1e:d9:0e:42:a3:a0 > usb0: HOST MAC 1e:d9:0e:42:a3:a1 > usb0: RNDIS ready > Bluetooth: Core ver 2.11 > NET: Registered protocol family 31 > Bluetooth: HCI device and connection manager initialized > Bluetooth: HCI socket layer initialized > Bluetooth: L2CAP ver 2.8 > Bluetooth: L2CAP socket layer initialized > Bluetooth: HIDP (Human Interface Emulation) ver 1.2 > gumstix_mci_init: MMC/SD: can't request MMC card detect IRQ > Bluetooth: RFCOMM socket layer initialized > Bluetooth: RFCOMM TTY layer initialized > Bluetooth: RFCOMM ver 1.8 > smc91x: not found (-19). > IEn > ALSA: Restoring mixer settings... > /usr/sbin/alsactl: load_state:1329: No soundcards found... > Starting Dropbear SSH server: Will output 1024 bit rsa secret key to > '/etc/dropbear/dropbear_rsa_host_key' > Generating key, this may take a while... > Public key portion is: > ssh-rsa > AAAAB3NzaC1yc2EAAAADAQABAAAAgwCFVAj821wvtVn2RxHgOy3uTRvRQrrTUwssMUkOxZIw2Iwh > muupkgTLTc3JG9bm9Z0XtCbuMNOARrVuF8XY74VXttj2H35fXP9h3wjgrzU08kNJ+G+xjWSXH6QV > YIdMiUEK+FS10w5eSw9DyP7xvoGvacadO8EY60Xwo/dngQ6VBy+b > Fingerprint: md5 5c:07:cf:29:0f:bf:de:ed:6a:31:58:90:ef:2a:1b:9c > dropbear. > Starting HTTP server: boagethostbyname:: No such file or directory > Starting system message bus: dbus. > Starting ntpd: done > Starting syslogd/klogd: done > Starting 32kHz clock...Settled > Starting Bluetooth subsystem: > Trying baud rate 921600... > No response after reset > No response from BT module > Trying baud rate 921600... > No response after reset > No response from BT module > Trying baud rate 115200... > No response after reset > No response from BT module > Trying baud rate 57600... > No response after reset > No response from BT module > Can't initialize device: Success > Running ntpdate to synchronize clockError : Name or service not known > . > Starting bonjour: > Starting Vixie-cron. > Starting i2c... > I2C: i2c-0: PXA I2C adapter > i2c /dev entries driver > > OpenEmbedded Linux gumstix-custom-connex ttyS0 > > Angstrom 2007.9-test-20080109 gumstix-custom-connex ttyS0 > > gumstix-custom-connex login: root > Password: > > Welcome to gumstix! > For information on how to customize or update this software please visit: > http://www.gumstix.net > > root@gumstix-custom-connex:~$ > > > > -----Original Message----- > From: gum...@li... > [mailto:gum...@li...] On Behalf Of Steve > Sakoman > Sent: Wednesday, January 09, 2008 8:11 PM > To: General mailing list for gumstix users. > Subject: Re: [Gumstix-users] OE - WiFiStix issues ? > > Yuvraj, > > Could you post your boot messages? There might be a clue in there. > > Steve > > On Jan 9, 2008 7:44 PM, Yuvraj Agarwal <yu...@uc...> wrote: > > I synced up with the OE build to the current version (117) and followed > the > > instructions to get a > > system up and running. Unfortunately I hit my first snag - WiFi doesn't > seem > > to be working. Any > > thoughts/idea/success stories ? > > > > Attaching an output of iwconfig, ifconfig and lsmod. The appropriate > modules > > seem to be loaded, but > > I don't see the interface. ... > > > > root@gumstix-custom-connex:~$ iwconfig > > lo no wireless extensions. > > > > usb0 no wireless extensions. > > > > root@gumstix-custom-connex:~$ ifconfig > > lo Link encap:Local Loopback > > inet addr:127.0.0.1 Mask:255.0.0.0 > > UP LOOPBACK RUNNING MTU:16436 Metric:1 > > RX packets:10 errors:0 dropped:0 overruns:0 frame:0 > > TX packets:10 errors:0 dropped:0 overruns:0 carrier:0 > > collisions:0 txqueuelen:0 > > RX bytes:3642 (3.5 KiB) TX bytes:3642 (3.5 KiB) > > > > root@gumstix-custom-connex:~$ lsmod > > Module Size Used by > > i2c_dev 6052 0 > > i2c_pxa 6720 0 > > i2c_core 17104 2 i2c_dev,i2c_pxa > > vfat 10080 0 > > fat 46332 1 vfat > > nls_base 6688 2 vfat,fat > > smc91x 16616 0 > > mii 4704 1 smc91x > > gumstix_smc91x 2752 1 smc91x > > rfcomm 35836 0 > > pxamci 6272 0 > > mmc_block 6728 0 > > mmc_core 22228 2 pxamci,mmc_block > > mcf25 197712 0 > > pxa2xx_cs 2916 2 > > pxa2xx_core 10304 1 pxa2xx_cs > > cfio 4928 1 mcf25 > > proc_gpio 7020 0 > > pcmcia 25288 1 cfio > > firmware_class 7520 1 pcmcia > > pcmcia_core 31024 4 mcf25,pxa2xx_core,cfio,pcmcia > > hidp 14752 0 > > hid 26272 1 hidp > > l2cap 20740 4 rfcomm,hidp > > bluetooth 50304 3 rfcomm,hidp,l2cap > > gumstix_bluetooth 1312 1 bluetooth > > g_ether 25296 0 > > pxa2xx_udc 16516 1 g_ether > > gumstix_gadget 1344 1 pxa2xx_udc > > root@gumstix-custom-connex:~$ > > > > > > > ------------------------------------------------------------------------- > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > |