From: Grahame J. <gb...@th...> - 2007-12-18 22:11:19
|
Hi, Looks to me that you do not have the i2c modules built. cd build_arm_nofpu/linux-2.6.21gum make ARCH=arm menuconfig Go to drivers->i2c enable i2c modules Save make ARCH=arm clean cd ../../ make vi build_arm_nofpu/root/etc/modules Add: i2c-dev i2c-pxa make load new rootfs Cheers Grahame lerikson wrote: > Hello, > > I am attempting to get i2c working on my xm4-bt. I'm using buildroot > version 1566 because this solved my bluetooth serial connection problems. > > To my eye it looks like I'm having difficulty building the i2c support. I > have followed the 'building the modules from source' directions found in the > wiki (http://docwiki.gumstix.org/I2C_on_the_Gumstix). However, when I run: > modprobe i2c-dev > modprobe i2c-pxa > > I receive no response. Additionally no i2c program exists on the gumstix. > > Here are a few extra details which may help: > 1) When I ran make defconfig I chose option 12 (verdex). Is this correct? > 2) I changed the target/device/Gumstix/verdex/linux.config file by hand to > match what I see in the wiki. > 3) When I run make ARCH=arm menuconfig in my build_arm_nofpu/linux-2.6.21gum > directory then I find I2C support under the devices section -- however, the > submenu is completely empty. I cannot change these options through > menuconfig. > > Please help. > Luke > > > |