From: LachelnKind <Lac...@gm...> - 2007-09-05 18:24:44
|
Well I have noticed a few threads with ppl saying the bluetooth isn't working. It looks like I am getting the same messages as some other ppl who are having problems. I have revision 1482 on my basix gumstix and will try and go through some of the tips people gave. The only tip I saw was to put these four lines echo "AF1 in" >/proc/gpio/GPIO42 echo "AF2 out" >/proc/gpio/GPIO43 echo "AF1 in" >/proc/gpio/GPIO44 echo "AF2 out" >/proc/gpio/GPIO45 in this file: /etc/init.d/S30bluetooth , in the start "stanza" after the modprobe of gumstix_bluetooth and proc_gpio. and also make sure that the ttyl in /etc/default/bluetooth is ttyS1 and not ttyS2 (which it is ttyS1, I checked before) Linus Casassa-2 wrote: > > I don't know if its the same for the basix. I only have verdex 400 MHz > with 64M of ram and 16M of flash. > > Everybody has the bluetooth working without problems? I think the > hardware is bad but why both of my gumstix :( > > On 9/5/07, LachelnKind <Lac...@gm...> wrote: >> >> Are all these fixes to get bluetooth working only for the verdex? or will >> it >> work with the basix-xm-bt also? I noticed my bluetooth hasn't been >> working >> recently (When I type hcitool scan on my laptop, it cant find my >> gumstix). >> >> >> >> Linus Casassa-2 wrote: >> > >> > It was working until I reboot. >> > >> > # /etc/init.d/S30bluetooth start >> > Starting 32kHz clock...Settled >> > Starting Bluetooth subsystem:Trying baud rate 115200... >> > Got response after reset... gobbling >> > No response from BT module >> > Trying baud rate 921600... >> > Got response after reset... gobbling >> > No response from BT module >> > Trying baud rate 115200... >> > Got response after reset... gobbling >> > No response from BT module >> > Trying baud rate 57600... >> > Got response after reset... gobbling >> > No response from BT module >> > Can't initialize device: Success >> > # >> > >> > >> > What can I do? >> > >> > >> ------------------------------------------------------------------------- >> > This SF.net email is sponsored by: Splunk Inc. >> > Still grepping through log files to find problems? Stop. >> > Now Search log events and configuration files using AJAX and a browser. >> > Download your FREE copy of Splunk now >> http://get.splunk.com/ >> > _______________________________________________ >> > gumstix-users mailing list >> > gum...@li... >> > https://lists.sourceforge.net/lists/listinfo/gumstix-users >> > >> > >> >> -- >> View this message in context: >> http://www.nabble.com/Bluetooth-stop-working-tf4381204.html#a12507130 >> Sent from the Gumstix mailing list archive at Nabble.com. >> >> >> ------------------------------------------------------------------------- >> This SF.net email is sponsored by: Splunk Inc. >> Still grepping through log files to find problems? Stop. >> Now Search log events and configuration files using AJAX and a browser. >> Download your FREE copy of Splunk now >> http://get.splunk.com/ >> _______________________________________________ >> gumstix-users mailing list >> gum...@li... >> https://lists.sourceforge.net/lists/listinfo/gumstix-users >> > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Splunk Inc. > Still grepping through log files to find problems? Stop. > Now Search log events and configuration files using AJAX and a browser. > Download your FREE copy of Splunk now >> http://get.splunk.com/ > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > -- View this message in context: http://www.nabble.com/Bluetooth-stop-working-tf4381204.html#a12508041 Sent from the Gumstix mailing list archive at Nabble.com. |