Screenshot instructions:
Windows
Mac
Red Hat Linux
Ubuntu
Click URL instructions:
Right-click on ad, choose "Copy Link", then paste here →
(This may not be possible with some types of ads)
|
From: Dave Hylands <dhylands@gm...> - 2007-06-09 07:52:25
|
> so if SSH is not working how else are you connecting to the gum stick board? > Not by the console I hope. Its taking 1 1/2 hours to flash itthat way. Is > there any way to connect over the network? I'm hoping my lack of ideas is > simply not being linux/unix savey. :-) Here's what I do. I have a netCF card. I transfer all of my images to the CF card under linux, using the network connection and wget, while being logged ini via the serial console. I then reboot under u-boot and load the files from the CF card. -- Dave Hylands Vancouver, BC, Canada http://www.DaveHylands.com/ |
|
From: Michael Caughey <michael@ca...> - 2007-06-08 19:06:08
Attachments:
Message as HTML
|
I just got my netCF-vx in today. i hooked it up in an effort to get the = network connection working so that I can use ssh instead of hyper = terminal. I also got my null modem cable in, great timing huh. I had = been using a cable I constructed and it work great. So the new null = modem cable doesn't seem to be working. =20 Is the cosole (the middle plug on the console-vx) disabled when the = netCF-vx card is installed? |
|
From: Michael Caughey <michael@ca...> - 2007-06-08 19:14:07
Attachments:
Message as HTML
|
It must be a bad null modem cable. I used my null modem cable which has = a bunch of pins I stick in the right holes (pain in the butt to do) and = I have a console connection. I guess I need to return my null modem = cable. Its the one with a white end not the green end. ----- Original Message -----=20 From: Michael Caughey=20 To: gumstix maillinglist=20 Sent: Friday, June 08, 2007 3:03 PM Subject: [Gumstix-users] Verdex - console-vx - netCF-vx (no console = access) I just got my netCF-vx in today. i hooked it up in an effort to get = the network connection working so that I can use ssh instead of hyper = terminal. I also got my null modem cable in, great timing huh. I had = been using a cable I constructed and it work great. So the new null = modem cable doesn't seem to be working. =20 Is the cosole (the middle plug on the console-vx) disabled when the = netCF-vx card is installed? -------------------------------------------------------------------------= ----- = -------------------------------------------------------------------------= This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ -------------------------------------------------------------------------= ----- _______________________________________________ gumstix-users mailing list gumstix-users@... https://lists.sourceforge.net/lists/listinfo/gumstix-users |
|
From: Heilpern, Mark <mark.heilpern@au...> - 2007-06-08 20:55:48
Attachments:
Message as HTML
|
If you manage to get ssh to work, please indicate if you do anything special to make it work. So far, I (and at least one other person on the list) have not been able to make it work on the Verdex. (Ethernet is fine, but ssh-keygen is segfaulting.) =20 =20 ________________________________ From: gumstix-users-bounces@... [mailto:gumstix-users-bounces@...] On Behalf Of Michael Caughey Sent: Friday, June 08, 2007 3:12 PM To: General mailing list for gumstix users. Subject: Re: [Gumstix-users] Verdex - console-vx - netCF-vx (no consoleaccess) =20 It must be a bad null modem cable. I used my null modem cable which has a bunch of pins I stick in the right holes (pain in the butt to do) and I have a console connection. I guess I need to return my null modem cable. Its the one with a white end not the green end. ----- Original Message -----=20 From: Michael Caughey <mailto:michael@...> =20 To: gumstix maillinglist <mailto:gumstix-users@...> =20 Sent: Friday, June 08, 2007 3:03 PM Subject: [Gumstix-users] Verdex - console-vx - netCF-vx (no console access) =20 I just got my netCF-vx in today. i hooked it up in an effort to get the network connection working so that I can use ssh instead of hyper terminal. I also got my null modem cable in, great timing huh. I had been using a cable I constructed and it work great. So the new null modem cable doesn't seem to be working. =20 =20 Is the cosole (the middle plug on the console-vx) disabled when the netCF-vx card is installed? =09 ________________________________ =09 ------------------------------------------------------------------------ - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/=20 =09 ________________________________ _______________________________________________ gumstix-users mailing list gumstix-users@... https://lists.sourceforge.net/lists/listinfo/gumstix-users NOTE: The information in this message is intended for the personal and = confidential use of the designated recipient(s) named above. To the extent the = recipient(s) is/are bound by a non-disclosure agreement, or other agreement that contains an = obligation of confidentiality, with AuthenTec, then this message and/or any = attachments shall be considered confidential information and subject to the confidentiality = terms of that agreement. If the reader of this message is not the intended recipient = named above, you are notified that you have received this document in error, and any = review, dissemination, distribution or copying of this message is strictly prohibited. If you = have received this document in error, please delete the original message and notify the = sender immediately. Thank you. AuthenTec, Inc. http://www.authentec.com |
|
From: Michael Caughey <michael@ca...> - 2007-06-09 04:27:57
Attachments:
Message as HTML
|
so if SSH is not working how else are you connecting to the gum stick =
board? Not by the console I hope. Its taking 1 1/2 hours to flash =
itthat way. Is there any way to connect over the network? I'm hoping =
my lack of ideas is simply not being linux/unix savey. :-)
----- Original Message -----=20
From: Heilpern, Mark=20
To: General mailing list for gumstix users.=20
Sent: Friday, June 08, 2007 4:55 PM
Subject: Re: [Gumstix-users] Verdex - console-vx - netCF-vx =
(noconsoleaccess)
If you manage to get ssh to work, please indicate if you do anything =
special to make it work. So far, I (and at least one other person on the =
list) have not been able to make it work on the Verdex. (Ethernet is =
fine, but ssh-keygen is segfaulting.)
=20
=20
-------------------------------------------------------------------------=
-----
From: gumstix-users-bounces@... =
[mailto:gumstix-users-bounces@...] On Behalf Of =
Michael Caughey
Sent: Friday, June 08, 2007 3:12 PM
To: General mailing list for gumstix users.
Subject: Re: [Gumstix-users] Verdex - console-vx - netCF-vx (no =
consoleaccess)
=20
It must be a bad null modem cable. I used my null modem cable which =
has a bunch of pins I stick in the right holes (pain in the butt to do) =
and I have a console connection. I guess I need to return my null modem =
cable. Its the one with a white end not the green end.
----- Original Message -----=20
From: Michael Caughey=20
To: gumstix maillinglist=20
Sent: Friday, June 08, 2007 3:03 PM
Subject: [Gumstix-users] Verdex - console-vx - netCF-vx (no console =
access)
=20
I just got my netCF-vx in today. i hooked it up in an effort to get =
the network connection working so that I can use ssh instead of hyper =
terminal. I also got my null modem cable in, great timing huh. I had =
been using a cable I constructed and it work great. So the new null =
modem cable doesn't seem to be working. =20
=20
Is the cosole (the middle plug on the console-vx) disabled when the =
netCF-vx card is installed?
-------------------------------------------------------------------------=
---
=
-------------------------------------------------------------------------=
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/=20
-------------------------------------------------------------------------=
---
_______________________________________________
gumstix-users mailing list
gumstix-users@...
https://lists.sourceforge.net/lists/listinfo/gumstix-users
-------------------------------------------------------------------------=
-----
NOTE: The information in this message is intended for the personal and =
confidential use of the designated recipient(s) named above. To the =
extent the recipient(s) is/are bound by a non-disclosure agreement, or =
other agreement that contains an obligation of confidentiality, with =
AuthenTec, then this message and/or any attachments shall be considered =
confidential information and subject to the confidentiality terms of =
that agreement. If the reader of this message is not the intended =
recipient named above, you are notified that you have received this =
document in error, and any review, dissemination, distribution or =
copying of this message is strictly prohibited. If you have received =
this document in error, please delete the original message and notify =
the sender immediately.
Thank you.
AuthenTec, Inc. http://www.authentec.com
=20
-------------------------------------------------------------------------=
-----
=
-------------------------------------------------------------------------=
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
-------------------------------------------------------------------------=
-----
_______________________________________________
gumstix-users mailing list
gumstix-users@...
https://lists.sourceforge.net/lists/listinfo/gumstix-users
|
|
From: Dave Hylands <dhylands@gm...> - 2007-06-09 07:52:25
|
> so if SSH is not working how else are you connecting to the gum stick board? > Not by the console I hope. Its taking 1 1/2 hours to flash itthat way. Is > there any way to connect over the network? I'm hoping my lack of ideas is > simply not being linux/unix savey. :-) Here's what I do. I have a netCF card. I transfer all of my images to the CF card under linux, using the network connection and wget, while being logged ini via the serial console. I then reboot under u-boot and load the files from the CF card. -- Dave Hylands Vancouver, BC, Canada http://www.DaveHylands.com/ |
|
From: Michael Caughey <michael@ca...> - 2007-06-09 12:55:16
|
is it documented how to do that anywhere? Do you have to mount the CF card any how? how do you copy the file, how do you flash what not. Thanks, ----- Original Message ----- From: "Dave Hylands" <dhylands@...> To: "General mailing list for gumstix users." <gumstix-users@...> Sent: Saturday, June 09, 2007 3:52 AM Subject: Re: [Gumstix-users] Verdex - console-vx - netCF-vx (noconsoleaccess) >> so if SSH is not working how else are you connecting to the gum stick >> board? >> Not by the console I hope. Its taking 1 1/2 hours to flash itthat way. >> Is >> there any way to connect over the network? I'm hoping my lack of ideas >> is >> simply not being linux/unix savey. :-) > > Here's what I do. > > I have a netCF card. I transfer all of my images to the CF card under > linux, using the network connection and wget, while being logged ini > via the serial console. I then reboot under u-boot and load the files > from the CF card. > > -- > Dave Hylands > Vancouver, BC, Canada > http://www.DaveHylands.com/ > > ------------------------------------------------------------------------- > This SF.net email is sponsored by DB2 Express > Download DB2 Express C - the FREE version of DB2 express and take > control of your XML. No limits. Just data. Click to get it now. > http://sourceforge.net/powerbar/db2/ > _______________________________________________ > gumstix-users mailing list > gumstix-users@... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > |
|
From: Dave Hylands <dhylands@gm...> - 2007-06-09 14:53:54
|
HI Michael, On 6/9/07, Michael Caughey <michael@...> wrote: > is it documented how to do that anywhere? Do you have to mount the CF card > any how? how do you copy the file, how do you flash what not. On the linux side of things, you mount the CF card using the command: mount /mnt/cf You copy the files using cp On the u-boot side (documented on the u-boot page), you use "pinit on" to initialize the CF card, and "fatload ide 0 a2000000 filename" to load a file off the CF card. I've discovered that my card doesn't work under the 1.1.4 u-boot, but works fine under 1.2.0, so I upgraded my u-boot. -- Dave Hylands Vancouver, BC, Canada http://www.DaveHylands.com/ |