From: Michael C. <mi...@ca...> - 2007-06-01 22:01:34
|
Ok its the middle serial port. Of course I onlly tried the one next tot he power like the wiki said and for grins tried the one on the left. It;s booting :-) Thanks ----- Original Message ----- From: "Dave Hylands" <dhy...@gm...> To: "General mailing list for gumstix users." <gum...@li...> Sent: Friday, June 01, 2007 5:39 PM Subject: Re: [Gumstix-users] Verdex XL6P and console-vx null modemandhyperterminal >> Has anyone been able to get the Hyperterminal to comminicate with the >> Verdex >> through the console-vx board? If so what settings did you use in >> Hyperterminal? > > I can talk with my verdex XM4 using Hyperterminal. > > I have a slight mod to my console-vx where I soldered a couple wires > on to connect up the BTUART Max232 Vcc and ground lines (since they're > missing on the 1414 revision of the board). > > I don't know if the mods are required for using the console or not. > > The console is the middle of the 3 connectors, and you need to be > using the null-modem cable (has a gray connector on the mini-din-8, > not the green connector). > > The settings I used were > > Bits per second: 115200 bits/sec > Data Bits: 8 > Parity: None > Stop bits: 1 > Flow Control: None > > There is a about 3 second delay from when you apply power until you'll > see anything (at least with the rev 1321 u-boot that came with mine). > > You should test you connection to ensure that you can short pins 3 & 5 > together outermost pins (of the middle row) on the Mini-Din8 (without > being plugged into the verdex) and then you should see what you type > in Hyperterminal. > Pins 3 & 5 can be identified using this: > <http://docswiki.gumstix.com/Gumstix_motherboard_I/O#Serial_cable_connections> > > -- > Dave Hylands > Vancouver, BC, Canada > http://www.DaveHylands.com/ > > ------------------------------------------------------------------------- > This SF.net email is sponsored by DB2 Express > Download DB2 Express C - the FREE version of DB2 express and take > control of your XML. No limits. Just data. Click to get it now. > http://sourceforge.net/powerbar/db2/ > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > |