Re: [Gumstix-users] Failed to find inode

[Jeff S. <jef...@gm...>]

I guess I have to mail it in now and pay $10 for a new flash?
Is that what I need to do?

On 4/24/07, Jeff Sadowski <jef...@gm...> wrote:
> I bricked it :-(
> now what?
> this is very frusterating
>
>
> On 4/24/07, Jeff Sadowski <jef...@gm...> wrote:
> > I have a Verdex XL6P there is no mmc that I know of
> >
> > On 4/24/07, Dave Hylands <dhy...@gm...> wrote:
> > > This is the "flavour" of the instructions you're looking for:
> > >
> > > mmcinit
> > > fatload mmc 1 a2000000 u-boot.bin
> > > protect off all
> > > era 1:0-1
> > > cp.b a2000000 0 ${filesize}
> > > reset
> > >
> > > The mmcinit/fatload portion assumes that you're using an SD card.
> > >
> > > Remind me what cards you have?
> > >
> > > For u-boot, I think it's also worthwhile to check the crc before doing
> > > the protect off/erase, since once you've done that there's no going
> > > back.
> > >
> > > Since you were mentioning the katinstall stuff, I'm assuming that you
> > > have a verdex. In that case you can copy the u-boot.bin file to the
> > > root of the filesystem (while running under linux) and load it from
> > > there while in u-boot.
> > >
> > > The instructions for that scenario would then become:
> > >
> > > fsload 0xa2000000 u-boot.bin
> > > crc32 0xa2000000 ${filesize}
> > >
> > > Now double check the crc32 with one obtained from your host-pc. If it
> > > matches, then do:
> > >
> > > protect off all
> > > era 1:0-1
> > > cp.b a2000000 0 ${filesize}
> > >
> > > If you see any errors or anything, it's important to not issue anyu
> > > further commands and don't power it down. If everything looks good,
> > > you can do:
> > >
> > > reset
> > >
> > > which will reboot to the new u-boot.
> > >
> > > --
> > > Dave Hylands
> > > Vancouver, BC, Canada
> > > http://www.DaveHylands.com/
> > >
> > > -------------------------------------------------------------------------
> > > This SF.net email is sponsored by DB2 Express
> > > Download DB2 Express C - the FREE version of DB2 express and take
> > > control of your XML. No limits. Just data. Click to get it now.
> > > http://sourceforge.net/powerbar/db2/
> > > _______________________________________________
> > > gumstix-users mailing list
> > > gum...@li...
> > > https://lists.sourceforge.net/lists/listinfo/gumstix-users
> > >
> >
>