Re: [Gumstix-users] SPI kernal compilation

[<ad...@so...>]

Hey thanks for your help,
I have now got the error:

[Alsky@localhost linux-2.6.20gum]$ make ARCH=arm
CROSS_COMPILE=../staging_dir/bin/arm-linux-
  CHK     include/linux/version.h
make[1]: `include/asm-arm/mach-types.h' is up to date.
  CHK     include/linux/utsrelease.h
  CHK     include/linux/compile.h
make[2]: *** No rule to make target `drivers/spi/robostix_spi.c', needed by
`drivers/spi/robostix_spi.o'.  Stop.
make[1]: *** [drivers/spi] Error 2
make: *** [drivers] Error 2

I did add the data to the make file though...

Alex



Quoting Andrei Rylin <po...@gm...>:

> Earlier versions of pxa2xx SPI master driver used .timeout_microsecs,
> then at some point it was changed to .timeout.
> I don't know the new .timeout units, but the numbers used
> are for the later, .timeout version of the driver.
> Bottom line: comment out the warning and rename
> .timeout_microsecs to .timeout
>
> On 3/28/07, Alex Gooding <ad...@so...> wrote:
> > Hey All,
> >
> > When following the instructions on the page:
> > http://docwiki.gumstix.org/Sample_code/C/SPI/kernel
> >
> > I have got to the bit of compiling the kernal and it breaks down. I
> first
> > get the warning:
> > arch/arm/mach-pxa/gumstix.c:74:2: warning: # #warning some versions
> have
> > just .timeout instead of .timeout_microsecs.
> >
> > I get this a few times then I get the errors:
> > arch/arm/mach-pxa/gumstix.c:52:2: error: unknown field
> 'timeout_microsecs'
> > specified in initializer
> >
> > I also get this a few times. Can anyone help with what this means?
> >
> > Alex
> >
> >
> >
> > ----- Original Message -----
> > From: "Dave Hylands" <dhy...@gm...>
> > To: "General mailing list for gumstix users."
> > <gum...@li...>
> > Sent: Wednesday, March 28, 2007 3:17 PM
> > Subject: Re: [Gumstix-users] SPI compilation problems
> >
> >
> > > Hi Alex,
> > >
> > > On 3/28/07, Dave Hylands <dhy...@gm...> wrote:
> > >> Hi Alex,
> > >>
> > >> > We have decided to put you in our dissertation acknoledgements for
> all
> > >> > the
> > >> > help you have given us! I have attached the makefile and the
> modified
> > >> > i2c-io.c file, we are still getting the same problem
> "spi-io.c:174:
> > >> > warning:
> > >> > function declaration isn't a prototype".
> > >
> > > Ahhh - the error is happening in the spi-io.c file.
> > >
> > > So what should really have happened is that the
> > >
> > > void spi_init_slave(void);
> > >
> > > should have gone in a header file. Anyways, the quite and dirty fix
> is
> > > to add that line just above the
> > >
> > > int ProcessCommand(I2C_Data_t *packet);
> > >
> > > in spi-io.c
> > >
> > > --
> > > Dave Hylands
> > > Vancouver, BC, Canada
> > > http://www.DaveHylands.com/
> > >
> > >
> -------------------------------------------------------------------------
> > > Take Surveys. Earn Cash. Influence the Future of IT
> > > Join SourceForge.net's Techsay panel and you'll get the chance to
> share
> > > your
> > > opinions on IT & business topics through brief surveys-and earn cash
> > >
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> > > _______________________________________________
> > > gumstix-users mailing list
> > > gum...@li...
> > > https://lists.sourceforge.net/lists/listinfo/gumstix-users
> > >
> > >
> > >
> >
> >
> >
> >
> >
> >
> -------------------------------------------------------------------------
> > Take Surveys. Earn Cash. Influence the Future of IT
> > Join SourceForge.net's Techsay panel and you'll get the chance to share
> your
> > opinions on IT & business topics through brief surveys-and earn cash
> >
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> > _______________________________________________
> > gumstix-users mailing list
> > gum...@li...
> > https://lists.sourceforge.net/lists/listinfo/gumstix-users
> >
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share
> your
> opinions on IT & business topics through brief surveys-and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> gumstix-users mailing list
> gum...@li...
> https://lists.sourceforge.net/lists/listinfo/gumstix-users
>
>
>