From: Andy K. <ak...@um...> - 2007-03-12 02:57:15
|
Hi, pre-built uisp, 2.6.18 from your website I believe (linked on the wiki page) uisp --erase --upload if=Robostix.hex or any command besides erase would not work. (I tried, rd_fuses, rd_anything, --verify, and so on) To fix it, I deleted the uisp file and then recopied it into place (from the tar.gz). I'm not entirely sure why that worked, but it seems to have fixed the issue. I would like to track down the problem, however, let me know if I can be of any help Thanks, ~Andy Klesh On 3/11/07, Dave Hylands <dhy...@gm...> wrote: > > Hi Andy, > > > I have created a stack with a Gumstix, Wifistix-CF and robostix. I had > > installed uisp for ISP over the serial ports and made all the > connections. > > In fact I even programmed the Robostix multiple times and everything was > > fine. > > > > Now when I run uisp over ssh, I get the invalid parameter error on > almost > > every command except --erase. > > > > Is there anything that might cause this? Odd voltages or something else > > strange? It was only a matter of hours between working and not working > with > > nothing in between. > > Are you using a prebuilt uisp? or one that you built with buildroot? > > What's the exact command line you're using? > > -- > Dave Hylands > Vancouver, BC, Canada > http://www.DaveHylands.com/ > > ------------------------------------------------------------------------- > Take Surveys. Earn Cash. Influence the Future of IT > Join SourceForge.net's Techsay panel and you'll get the chance to share > your > opinions on IT & business topics through brief surveys-and earn cash > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > |