From: Chris E. <roo...@gm...> - 2006-10-31 23:04:37
|
Thanks for the response, Dave. The LED is flashing about twice per second. I believe I programmed the fuses correctly. # i2c-load 0x0b info ERROR: I2cTransfer: CRC failed: Rcvd: 0x00, expecting: 0xc5 ERROR: I2cReadBlock failed ERROR: Unable to retrieve boot information from i2c address 0x0b On 10/31/06, Dave Hylands <dhy...@gm...> wrote: > > Hi Chris, > > > I am trying to get gumstix/robostix i2c working. I have set up i2c, > > installed the i2c bootloader, and tried to send i2c-io.ehx to the > robostix > > as follows: > > How fast is the LED flashing? It should be about twice per second if > you've just programmed the bootloader. > > Did you program the fuses? > You can use the pgm-fuse-bootloader from the robostix directory. > > How about: > > i2c-load 0x0b info > > Once you start getting errors, you may need to reboot the gumstix (or > remove and reload the i2c modules). > > -- > Dave Hylands > Vancouver, BC, Canada > http://www.DaveHylands.com/ > > ------------------------------------------------------------------------- > Using Tomcat but need to do more? Need to support web services, security? > Get stuff done quickly with pre-integrated technology to make your job > easier > Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > |