From: Karl v. M. <ver...@gm...> - 2006-03-19 09:49:46
|
Dave, On 3/19/06, Dave Hylands <dhy...@gm...> wrote: > > Hi Renzo, > > > Is it possible to set the uboot to use ttyS2 instead of ttyS0? > > If you drop into uboot, and issue printenv you should see something > like the following for bootargs. > > Change ttyS0 to ttyS2 (but leave everything else the same). Correct me if I'm wrong, but wont that only take effect after u-boot and th= e kernel are loaded? |