From: Anand S. <as...@gm...> - 2010-04-28 11:18:45
|
Greetings all, I am pretty new to gumstix. I recently built an overo palmtop image using bitbake omap3-palmtop-image by following "Setting up a build environment" of the gumstix developer site. Since this image was not booting up correctly to the GPE, I decided to download and try a precompiled image, omap3-palmtop-image-overo-201004270808.tar.bz2 After comparing the contents of both images, it looks like many of the softlinks of initialization scripts are missing in the custom built image. precompiled palmtop image: #ls /etc/rcS.d S01psplash S12udev-cache S38devpts.sh S45mountnfs.sh S02banner S20modutils.sh S39alsa-state S55bootmisc.sh S03sysfs S30procps.sh S39hostname.sh S97blueprobe S03udev S30ramdisk S39ifup S98configure S06alignment S35mountall.sh S40networking S99finish.sh S10checkroot S37populate-volatile.sh S43portmap #ls /etc/rc5.d S02dbus-1 S20ntpd S23bluetooth S97atd S05syslog-ng S20syslog S30pvr-init S99gpe-dm S20apmd S21avahi-daemon S50usb-gadget S99rmnologin custom locally compiled palmtop image #ls /etc/rcS.d S02banner S30ramdisk S39hostname.sh S98configure S03sysfs S35mountall.sh S45mountnfs.sh S99finish.sh S06alignment S37populate-volatile.sh S55bootmisc.sh S10checkroot S38devpts.sh S97blueprobe #ls /etc/rc5.d S99rmnologin Is there anything missing here? Do I need to include any other packages to the palmtop list? Any help would be really appreciated. Thanks and Regards Anand |
From: Anand S. <as...@gm...> - 2010-04-29 17:51:55
|
After analyzing this problem, there are some more findings. I could not see my /etc/rcS.d and /etc/rc5.d getting populated properly with the exception of whatever mentioned from initscripts/initscripts_1.0.bb. For example for "udev", even though the package is getting built and installed properly whatever listed by init script/update-rc.d is not getting done. INITSCRIPT_NAME = "udev" INITSCRIPT_PARAMS = "start 03 S ." Where as in the pre-built images by Steve, everything is popluated correctly. Any clues? On Wed, Apr 28, 2010 at 16:48, Anand Sivaram <as...@gm...> wrote: > Greetings all, > > I am pretty new to gumstix. I recently built an overo palmtop image using > bitbake omap3-palmtop-image > by following "Setting up a build environment" of the gumstix developer site. > > Since this image was not booting up correctly to the GPE, I decided > to download and try a precompiled image, > omap3-palmtop-image-overo-201004270808.tar.bz2 > > After comparing the contents of both images, it looks like > many of the softlinks of initialization scripts are missing > in the custom built image. > > precompiled palmtop image: > #ls /etc/rcS.d > S01psplash S12udev-cache S38devpts.sh S45mountnfs.sh > S02banner S20modutils.sh S39alsa-state S55bootmisc.sh > S03sysfs S30procps.sh S39hostname.sh S97blueprobe > S03udev S30ramdisk S39ifup S98configure > S06alignment S35mountall.sh S40networking S99finish.sh > S10checkroot S37populate-volatile.sh S43portmap > #ls /etc/rc5.d > S02dbus-1 S20ntpd S23bluetooth S97atd > S05syslog-ng S20syslog S30pvr-init S99gpe-dm > S20apmd S21avahi-daemon S50usb-gadget S99rmnologin > > custom locally compiled palmtop image > #ls /etc/rcS.d > S02banner S30ramdisk S39hostname.sh S98configure > S03sysfs S35mountall.sh S45mountnfs.sh S99finish.sh > S06alignment S37populate-volatile.sh S55bootmisc.sh > S10checkroot S38devpts.sh S97blueprobe > #ls /etc/rc5.d > S99rmnologin > > Is there anything missing here? Do I need to include any other > packages to the palmtop list? Any help would be really appreciated. > > Thanks and Regards > > Anand > |
From: Jeff R. <jef...@gm...> - 2010-05-13 10:56:33
|
I'm having the same issue, did you get anywhere? I'm about to give up for the night and sleep on it. Boohoo. Any help would be appreciated. Jeff On Thu, Apr 29, 2010 at 10:51 AM, Anand Sivaram <as...@gm...> wrote: > After analyzing this problem, there are some more findings. > I could not see my /etc/rcS.d and /etc/rc5.d getting populated > properly with the exception of whatever mentioned from > initscripts/initscripts_1.0.bb. > > For example for "udev", even though the package is getting built and > installed properly whatever listed by init script/update-rc.d is not > getting done. > INITSCRIPT_NAME = "udev" > INITSCRIPT_PARAMS = "start 03 S ." > > Where as in the pre-built images by Steve, everything is popluated > correctly. > Any clues? > > On Wed, Apr 28, 2010 at 16:48, Anand Sivaram <as...@gm...> wrote: > > Greetings all, > > > > I am pretty new to gumstix. I recently built an overo palmtop image > using > > bitbake omap3-palmtop-image > > by following "Setting up a build environment" of the gumstix developer > site. > > > > Since this image was not booting up correctly to the GPE, I decided > > to download and try a precompiled image, > > omap3-palmtop-image-overo-201004270808.tar.bz2 > > > > After comparing the contents of both images, it looks like > > many of the softlinks of initialization scripts are missing > > in the custom built image. > > > > precompiled palmtop image: > > #ls /etc/rcS.d > > S01psplash S12udev-cache S38devpts.sh S45mountnfs.sh > > S02banner S20modutils.sh S39alsa-state S55bootmisc.sh > > S03sysfs S30procps.sh S39hostname.sh S97blueprobe > > S03udev S30ramdisk S39ifup S98configure > > S06alignment S35mountall.sh S40networking S99finish.sh > > S10checkroot S37populate-volatile.sh S43portmap > > #ls /etc/rc5.d > > S02dbus-1 S20ntpd S23bluetooth S97atd > > S05syslog-ng S20syslog S30pvr-init S99gpe-dm > > S20apmd S21avahi-daemon S50usb-gadget S99rmnologin > > > > custom locally compiled palmtop image > > #ls /etc/rcS.d > > S02banner S30ramdisk S39hostname.sh S98configure > > S03sysfs S35mountall.sh S45mountnfs.sh S99finish.sh > > S06alignment S37populate-volatile.sh S55bootmisc.sh > > S10checkroot S38devpts.sh S97blueprobe > > #ls /etc/rc5.d > > S99rmnologin > > > > Is there anything missing here? Do I need to include any other > > packages to the palmtop list? Any help would be really appreciated. > > > > Thanks and Regards > > > > Anand > > > > > ------------------------------------------------------------------------------ > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > |
From: Jeff R. <jef...@gm...> - 2010-05-13 12:44:47
|
I probably should've gone to bed. Ha. The good news is my rcX.d directories are correctly populating now. I think the magic was in commit f09ff5683c9477b9a59f0f56264a2bafa8682a26 (verdex git repo.) Adding a dependency for update-rc.d-native. Good morning gentlemen. On Thu, May 13, 2010 at 3:56 AM, Jeff Roberts <jef...@gm...>wrote: > I'm having the same issue, did you get anywhere? I'm about to give up for > the night and sleep on it. Boohoo. > Any help would be appreciated. > > Jeff > > > On Thu, Apr 29, 2010 at 10:51 AM, Anand Sivaram <as...@gm...> wrote: > >> After analyzing this problem, there are some more findings. >> I could not see my /etc/rcS.d and /etc/rc5.d getting populated >> properly with the exception of whatever mentioned from >> initscripts/initscripts_1.0.bb. >> >> For example for "udev", even though the package is getting built and >> installed properly whatever listed by init script/update-rc.d is not >> getting done. >> INITSCRIPT_NAME = "udev" >> INITSCRIPT_PARAMS = "start 03 S ." >> >> Where as in the pre-built images by Steve, everything is popluated >> correctly. >> Any clues? >> >> On Wed, Apr 28, 2010 at 16:48, Anand Sivaram <as...@gm...> wrote: >> > Greetings all, >> > >> > I am pretty new to gumstix. I recently built an overo palmtop image >> using >> > bitbake omap3-palmtop-image >> > by following "Setting up a build environment" of the gumstix developer >> site. >> > >> > Since this image was not booting up correctly to the GPE, I decided >> > to download and try a precompiled image, >> > omap3-palmtop-image-overo-201004270808.tar.bz2 >> > >> > After comparing the contents of both images, it looks like >> > many of the softlinks of initialization scripts are missing >> > in the custom built image. >> > >> > precompiled palmtop image: >> > #ls /etc/rcS.d >> > S01psplash S12udev-cache S38devpts.sh S45mountnfs.sh >> > S02banner S20modutils.sh S39alsa-state S55bootmisc.sh >> > S03sysfs S30procps.sh S39hostname.sh S97blueprobe >> > S03udev S30ramdisk S39ifup S98configure >> > S06alignment S35mountall.sh S40networking S99finish.sh >> > S10checkroot S37populate-volatile.sh S43portmap >> > #ls /etc/rc5.d >> > S02dbus-1 S20ntpd S23bluetooth S97atd >> > S05syslog-ng S20syslog S30pvr-init S99gpe-dm >> > S20apmd S21avahi-daemon S50usb-gadget S99rmnologin >> > >> > custom locally compiled palmtop image >> > #ls /etc/rcS.d >> > S02banner S30ramdisk S39hostname.sh S98configure >> > S03sysfs S35mountall.sh S45mountnfs.sh S99finish.sh >> > S06alignment S37populate-volatile.sh S55bootmisc.sh >> > S10checkroot S38devpts.sh S97blueprobe >> > #ls /etc/rc5.d >> > S99rmnologin >> > >> > Is there anything missing here? Do I need to include any other >> > packages to the palmtop list? Any help would be really appreciated. >> > >> > Thanks and Regards >> > >> > Anand >> > >> >> >> ------------------------------------------------------------------------------ >> _______________________________________________ >> gumstix-users mailing list >> gum...@li... >> https://lists.sourceforge.net/lists/listinfo/gumstix-users >> > > |