Red Hat Linux
Click URL instructions:
Right-click on ad, choose "Copy Link", then paste here →
(This may not be possible with some types of ads)
You seem to have CSS turned off.
Please don't fill out this field.
Briefly describe the problem (required):
Please provide the ad click URL, if possible:
Hi,=0A I have NetMMC and Robaudio plugged in to a gumstix and then=0Athe Ne=
t connection is not established.=0ANetMMC alone if plugged in with out roba=
udio net is fine.=0A Any clues?=0A joby=0A=0A
> I have NetMMC and Robaudio plugged in to a gumstix and then
> the Net connection is not established.
> NetMMC alone if plugged in with out robaudio net is fine.
> Any clues?
You probably need to add a pullup resistor on the console to allow it
to boot up.
Basically, you need to add a 10k resistor between pin 4 of the
connector labelled GUMSTIX, and one of the +5 connections (aka V_BATT)
on the UARTS port.
If you look at this photo:
the pin with the black dot (on the GUMSTIX connector - bottom left of
the photo) is pin 1.
Vancouver, BC, Canada
Sign up for the SourceForge newsletter: