I'm trying to configure an LCD with the gumstix following the steps in the
wiki display. to set the bootargs I'm using a line like this:
GUM> setenv bootargs console=ttyS0,115200n8 root=1f01 rootfstype=jffs2
The line is too long for one line and the second line is not recognized.
after rebooting I get errors or all my registers are set to zero (that's
depending what I have in the fist line and what in the next one). I'd been
trying different ways to do it but is not working.
What is the correct way to set the bootargs using several lines?
From: Dave Hylands <dhylands@gm...> - 2006-11-11 03:14:13
> GUM> setenv bootargs console=ttyS0,115200n8 root=1f01 rootfstype=jffs2
> reboot=cold,hard video=pxafb:mode:640x480-16,active
You need to make sure that there aren't any spaces. It should all be
on one line, although it might wrap on your terminal.
I find that I do stuff like this in my text editor and then use the
copy/paste feature of my terminal program to "type in" the characters.
Vancouver, BC, Canada
Get latest updates about Open Source Projects, Conferences and News.