From: Dave Hylands <dhylands@gm...> - 2006-02-10 21:42:11
For those of you using the i2c-BootLoader, I just delivered a change
that affects the bootup behaviour.
The i2c-BootLoader supports a feature where you can plug in a jumper
between pins 9 and 10 of the ISP jumper to force it into bootloader
Unfortunately, the test was done immediately after configuring the
port as an input port and enabling the pullup jumper.
The would often cause it to false detect that the jumper was present
and force it into bootloader mode even when a program was downloaded.
So I separated the configuration of the pin away from the test. The
precompiled .hex file has been updated.
I think I should add an SVN version to the info returned from the
bootloader (like the info in i2c-io has).
Vancouver, BC, Canada