I am trying to work out if my MPURATE=800 is working. When I look at dmesg I can see that it changes it to:
# dmesg | grep MPU
<6>[ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
<6>[ 0.098876] Switched to new clocking rate (Crystal/Core/MPU): 26.0/332/800 MHz
but then when I:
then it will say 600MHz.
So my question is: is it running at running at 800MHz or 600MHz?
I am using Kernel version 3.3.0 with a Overo WaterStorm.
I know there is a kernel problem because:
# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies
I am probably missing a patch that updates the rate tables.
PROPRIETARY: This e-mail contains proprietary information some or all of which may be legally privileged. It is intended for the recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the authority by replying to this e-mail. If you are not the intended recipient you must not use, disclose, distribute, copy, print, or rely on this e-mail.