Is there a way to get the buildroot that corresponds to my gumstix
release? (2.6.10gum #1)
I'd like to compile a kernel module (and probably need to turn on some
other modules) but I am anxious about upgrading the kernel right off...
- I don't want to 'brick' this thing (I don't have any JTAG hw)
- I saw people were having trouble with bluetooth in -current
On 14 Apr 2005, at 16:24, Brad Midgley wrote:
> I'd like to compile a kernel module (and probably need to turn on some
> other modules) but I am anxious about upgrading the kernel right
> - I don't want to 'brick' this thing (I don't have any JTAG hw)
Do you have a serial cable? If you do you can use u-boot to re-flash
even if you mess-up the Linux install. The u-boot sectors are on the
flash are write-protected, so provided you don't re-flash u-boot (which
is hard to do accidentally and not necessary for changing the Linux
bits) you don't need JTAG.
I wouldn't risk flashing u-boot without JTAG hardware but flashing a
new root_fs_arm isn't going to 'brick' your gumstix.