We are trying to use the Spectrum Digital xds560r to connect to the DSP core on the OMAP3530. We have located the appropriate signals(from http://gumstix.org/hardware-design/overo-coms/74-overo-connectors/85-jtag.html) and have pulled it out to a 14 pin connector . Our research indicates that the xds560r supports 1.8 logic (http://focus.ti.com/dsp/docs/thirdparty/catalog/devtoolsproductfolder.tsp?actionPerformed=productFolder&productId=1458). We are using CCS 3.3 and we get the following error (see below) when we use the xdsprobe utility. We get similar messages when we use CCS code Composer to connect. Does anybody have any suggestions?
-----[Print the reset-command software log-file]-----------------------------
This utility has selected an XDS510 class product.
This utility will load the adapter 'xds510.dll'.
This utility will operate on port address '0x0240'.
The controller does not use a programmable FPGA.
An error occurred while hard opening the controller.
-----[An error has occurred and this utility has aborted]--------------------
This error is generated by TI's USCIF driver.
The value is '-180' (0xffffff4c).
The title is 'SC_ERR_CTL_NO_TRG_POWER'.
The explanation is:
The controller has detected a target power loss.
The user must turn-on or connect the power supply for the target.
Shared Spectrum Company
1595 Spring Hill Road, Suite 110
Vienna, VA 22182
phone: (703) 761-2818
fax: (703) 761-2817
Get latest updates about Open Source Projects, Conferences and News.