From: Grahame J. <gb...@th...> - 2007-01-03 23:22:20
|
Hi, Once I compile an image for the Gumstix the bluetooth will not start. It has the new PBA 31308 bluetooth module on board. Is there a module I need to compile or load? # /etc/init.d/S30bluetooth start Starting 32kHz clock...Settled Set (AF1,out,set) via /proc/gpio/GPIO12 Starting Bluetooth subsystem:Trying baud rate 57600... Set (GPIO,out,clear) via /proc/gpio/GPIO7 Set (GPIO,out,set) via /proc/gpio/GPIO7 Got response after reset... gobbling No response from BT module Trying baud rate 115200... Set (GPIO,out,clear) via /proc/gpio/GPIO7 Set (GPIO,out,set) via /proc/gpio/GPIO7 Got response after reset... gobbling Initialization timed out. Thanks Grahame Jordan |
From: Jesse W. <jes...@gm...> - 2007-01-04 07:44:58
|
can you post dmesg so we can see what happens at boot? On 1/3/07, Grahame Jordan <gb...@th...> wrote: > Hi, > > Once I compile an image for the Gumstix the bluetooth will not start. > It has the new PBA 31308 bluetooth module on board. > Is there a module I need to compile or load? > > # /etc/init.d/S30bluetooth start > Starting 32kHz clock...Settled > Set (AF1,out,set) via /proc/gpio/GPIO12 > Starting Bluetooth subsystem:Trying baud rate 57600... > Set (GPIO,out,clear) via /proc/gpio/GPIO7 > Set (GPIO,out,set) via /proc/gpio/GPIO7 > Got response after reset... gobbling > No response from BT module > Trying baud rate 115200... > Set (GPIO,out,clear) via /proc/gpio/GPIO7 > Set (GPIO,out,set) via /proc/gpio/GPIO7 > Got response after reset... gobbling > Initialization timed out. > > Thanks > > Grahame Jordan > > ------------------------------------------------------------------------- > Take Surveys. Earn Cash. Influence the Future of IT > Join SourceForge.net's Techsay panel and you'll get the chance to share your > opinions on IT & business topics through brief surveys - and earn cash > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > -- :wq |
From: Grahame J. <gb...@th...> - 2007-01-06 11:43:56
|
I upgraded to the latest buildroot which gave me the results below. Then I started to develop another problem related to GCC4.1.1. *__GI_ioperm* reference I tried to back it out to GCC 3.4.5. but still got the same compile error. I could not replicate the error below. So at length I backed down to r1161 with GCC-3.4.5 and it works nicely. Thanks Jesse Welling wrote: > can you post dmesg so we can see what happens at boot? > > On 1/3/07, Grahame Jordan <gb...@th...> wrote: >> Hi, >> >> Once I compile an image for the Gumstix the bluetooth will not start. >> It has the new PBA 31308 bluetooth module on board. >> Is there a module I need to compile or load? >> >> # /etc/init.d/S30bluetooth start >> Starting 32kHz clock...Settled >> Set (AF1,out,set) via /proc/gpio/GPIO12 >> Starting Bluetooth subsystem:Trying baud rate 57600... >> Set (GPIO,out,clear) via /proc/gpio/GPIO7 >> Set (GPIO,out,set) via /proc/gpio/GPIO7 >> Got response after reset... gobbling >> No response from BT module >> Trying baud rate 115200... >> Set (GPIO,out,clear) via /proc/gpio/GPIO7 >> Set (GPIO,out,set) via /proc/gpio/GPIO7 >> Got response after reset... gobbling >> Initialization timed out. >> >> Thanks >> >> Grahame Jordan >> >> ------------------------------------------------------------------------- >> >> Take Surveys. Earn Cash. Influence the Future of IT >> Join SourceForge.net's Techsay panel and you'll get the chance to >> share your >> opinions on IT & business topics through brief surveys - and earn cash >> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV >> >> _______________________________________________ >> gumstix-users mailing list >> gum...@li... >> https://lists.sourceforge.net/lists/listinfo/gumstix-users >> > > |